[meta-intel] [PATCH 1/1] fri2: use emgd version 1.16 instead of 1.14
Darren Hart
darren.hart at intel.com
Thu Jan 31 12:35:24 PST 2013
On 01/31/2013 12:22 PM, nitin.a.kamble at intel.com wrote:
> From: Nitin A Kamble <nitin.a.kamble at intel.com>
>
> The recently added version 1.16 of emgd graphics stack
> is also working for the FRI2 bsp.
>
> Update the BSP to use the newer EMGD version for graphics.
>
> This partly addresses:
> [YOCTO #3809]
>
> Signed-off-by: Nitin A Kamble <nitin.a.kamble at intel.com>
> ---
> meta-fri2/README | 8 ++++----
> meta-fri2/conf/machine/fri2.conf | 2 +-
> .../recipes-kernel/linux/linux-yocto_3.4.bbappend | 2 +-
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/meta-fri2/README b/meta-fri2/README
> index 952130a..6a77841 100644
> --- a/meta-fri2/README
> +++ b/meta-fri2/README
> @@ -109,10 +109,10 @@ following to the local.conf file:
>
> The 'fri2' machine includes the emgd-driver-bin package, which has a
> proprietary license that must be whitelisted by adding the string
> -"license_emgd-driver-bin" to the LICENSE_FLAGS_WHITELIST variable in
> -your local.conf. For example:
> +"license_emgd-driver-bin_1.16" to the LICENSE_FLAGS_WHITELIST variable
> +in your local.conf. For example:
>
> - LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin"
> + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.16"
As I understand it, the non-versioned string is adequate and reduce the
maintenance effort. Is there a particular reason you've added the
version back?
>
> If you want to enable the layer that does not support EMGD graphics,
> add the following to the local.conf file:
> @@ -134,7 +134,7 @@ added to the the LICENSE_FLAGS_WHITELIST variable in your local.conf.
>
> For example:
>
> - LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin commercial"
> + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.16 commercial"
Same...
>
> The reason this is needed is to prevent the image from including
> anything that might violate the license terms of the packages used to
> diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf
> index a1b13fa..12b8367 100644
> --- a/meta-fri2/conf/machine/fri2.conf
> +++ b/meta-fri2/conf/machine/fri2.conf
> @@ -27,7 +27,7 @@ XSERVER ?= "${XSERVER_IA32_BASE} \
> PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
> PREFERRED_VERSION_mesa-dri ?= "9.0.1"
> PREFERRED_VERSION_xf86-input-evdev ?= "2.6.0"
> -PREFERRED_VERSION_emgd-driver-bin ?= "1.14"
> +PREFERRED_VERSION_emgd-driver-bin ?= "1.16"
>
> # Syslinux does not know about the 64MHz uart clock and it does not detect the
> # serial device by number. Use the IO port directly and divide the baud down to
> diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto_3.4.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto_3.4.bbappend
> index 9165f21..e47bae3 100644
> --- a/meta-fri2/recipes-kernel/linux/linux-yocto_3.4.bbappend
> +++ b/meta-fri2/recipes-kernel/linux/linux-yocto_3.4.bbappend
> @@ -3,7 +3,7 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> COMPATIBLE_MACHINE_fri2 = "fri2"
> KMACHINE_fri2 = "fri2"
> KBRANCH_fri2 = "standard/fri2"
> -KERNEL_FEATURES_fri2_append = " features/drm-emgd cfg/vesafb"
> +KERNEL_FEATURES_fri2_append = " features/drm-emgd/drm-emgd-1.16 cfg/vesafb"
> SRCREV_machine_pn-linux-yocto_fri2 ?= "${AUTOREV}"
> SRCREV_meta_pn-linux-yocto_fri2 ?= "${AUTOREV}"
>
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
More information about the meta-intel
mailing list