[meta-intel] [patch v2 1/1] emenlow-noemgd: create a new BSP
Tom Zanussi
tom.zanussi at intel.com
Sun Jan 20 16:51:37 PST 2013
On Sun, 2013-01-20 at 18:30 -0600, Kamble, Nitin A wrote:
>
> > -----Original Message-----
> > From: Zanussi, Tom
> > Sent: Sunday, January 20, 2013 8:14 AM
> > To: Kamble, Nitin A
> > Cc: Hart, Darren; meta-intel at yoctoproject.org
> > Subject: Re: [patch v2 1/1] emenlow-noemgd: create a new BSP
> >
> > On Fri, 2013-01-18 at 17:19 -0600, Tom Zanussi wrote:
> > > On Fri, 2013-01-18 at 17:07 -0600, Kamble, Nitin A wrote:
> > > >
> > > > > -----Original Message-----
> > > > > From: Zanussi, Tom
> > > > > Sent: Friday, January 18, 2013 11:17 AM
> > > > > To: Hart, Darren
> > > > > Cc: Kamble, Nitin A; meta-intel at yoctoproject.org
> > > > > Subject: Re: [patch v2 1/1] emenlow-noemgd: create a new BSP
> > > > >
> > > > > On Fri, 2013-01-18 at 11:09 -0800, Darren Hart wrote:
> > > > > > On 01/17/2013 01:41 PM, nitin.a.kamble at intel.com wrote:
> > > > > > > From: Nitin A Kamble <nitin.a.kamble at intel.com>
> > > > > > >
> > > > > > > This is based on the gma500/gma600 kernel driver and the
> > > > > > > modesetting X driver for poulsbo graphics.
> > > > > > >
> > > > > > > The gma500 driver needs soft cursor in X.
> > > > > > >
> > > > > > > Signed-off-by: Nitin A Kamble <nitin.a.kamble at intel.com>
> > > > > >
> > > > > > Looks ready to pull to me Tom.
> > > > > >
> > > > >
> > > > > Yep, I've built and booted it - just waiting for the kernel bits
> > > > > to make it in before pulling...
> > > > >
> > > > > Tom
> > > > >
> > > > > > Acked-by: Darren Hart <dvhart at linux.intel.com>
> > > >
> > > > Hi Tom,
> > > > I have added the vesafb support back to emgd based BSPs, and also
> > verified that splash screen is working. I have also incorporated the further
> > feedback received from Darren in the commits on the contrib branch. I have
> > also taken out commits to just rearrange the SRC_URI for easily overriding git
> > repo with local one. And kernel repo commits are also ready now for Bruce.
> > So once Bruce pulls in the Linux-yocto commits, you can also pull in the meta-
> > intel commits from the nitin/misc contrib branch.
> > > >
> > >
> > > OK, I'll have to do a new set of rebuilds/boot testing - if I don't
> > > see Bruce's pulls into the kernel soon, I'll redo my local kernel and
> > > the retry your patches. So...may not happen immediately.
> > >
> >
> > OK, done, your nitin/misc branch has now been pulled in.
> >
> > I had to fix the emenlow SRC_URI which still contained the xx_git_repo thing,
> > though, so you may want to check my changes.
> >
> Thanks Tom. Your changes look ok to me.
>
> > Also, if you make changes to a branch, please repost the patches here as
> > well.
>
> I was avoiding too many emails going to mailing list when there are not significant changes in the commits.
>
Well, there's not much traffic on this list, so it's not a big deal even
if the changes are small - it's part of the feedback loop, it's better
for review and it helps keep track of what to pull in.
Thanks,
Tom
> Nitin
>
> >
> > Thanks,
> >
> > Tom
> >
> > > Tom
> > >
> > > > Thanks,
> > > > Nitin
> > > >
> > > > > >
> > > > > > > ---
> > > > > > > meta-emenlow/conf/machine/emenlow-noemgd.conf | 16
> > > > > +++++++++++
> > > > > > > .../formfactor/emenlow-noemgd/machconfig | 3 ++
> > > > > > > .../xserver-xf86-config/emenlow-noemgd/xorg.conf | 27
> > > > > ++++++++++++++++++++
> > > > > > > .../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 ++++++
> > > > > > > 4 files changed, 54 insertions(+), 0 deletions(-) create
> > > > > > > mode
> > > > > > > 100644 meta-emenlow/conf/machine/emenlow-noemgd.conf
> > > > > > > create mode 100644
> > > > > > > meta-emenlow/recipes-bsp/formfactor/formfactor/emenlow-
> > > > > noemgd/machco
> > > > > > > nfig create mode 100644
> > > > > > > meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-
> > > > > config/emenl
> > > > > > > ow-noemgd/xorg.conf
> > > > > > >
> > > > > > > diff --git a/meta-emenlow/conf/machine/emenlow-noemgd.conf
> > > > > > > b/meta-emenlow/conf/machine/emenlow-noemgd.conf
> > > > > > > new file mode 100644
> > > > > > > index 0000000..9a995c1
> > > > > > > --- /dev/null
> > > > > > > +++ b/meta-emenlow/conf/machine/emenlow-noemgd.conf
> > > > > > > @@ -0,0 +1,16 @@
> > > > > > > +#@TYPE: Machine
> > > > > > > +#@NAME: emenlow-noemgd
> > > > > > > +
> > > > > > > +#@WEBTITLE: Intel Atom Z5xx Processor With Intel US15W
> > > > > > > +Controller Hub (eMenlow) with open source graphics
> > > > > > > +
> > > > > > > +#@DESCRIPTION: Machine configuration for eMenlow based
> > > > > > > +systems, like the Webs-2120 box, without the
> > > > > > > +Intel-proprietary graphics bits
> > > > > > > +
> > > > > > > +PREFERRED_VERSION_linux-yocto ?= "3.4%"
> > > > > > > +
> > > > > > > +require conf/machine/include/tune-atom.inc
> > > > > > > +require conf/machine/include/ia32-base.inc
> > > > > > > +
> > > > > > > +XSERVER ?= "${XSERVER_IA32_BASE} \
> > > > > > > + ${XSERVER_IA32_EXT} \
> > > > > > > + ${XSERVER_IA32_MODESETTING} \
> > > > > > > + "
> > > > > > > diff --git
> > > > > > > a/meta-emenlow/recipes-bsp/formfactor/formfactor/emenlow-
> > > > > noemgd/mach
> > > > > > > config
> > > > > > > b/meta-emenlow/recipes-bsp/formfactor/formfactor/emenlow-
> > > > > noemgd/mach
> > > > > > > config
> > > > > > > new file mode 100644
> > > > > > > index 0000000..ffce012
> > > > > > > --- /dev/null
> > > > > > > +++ b/meta-emenlow/recipes-
> > bsp/formfactor/formfactor/emenlow-
> > > > > noemgd/
> > > > > > > +++ machconfig
> > > > > > > @@ -0,0 +1,3 @@
> > > > > > > +# Assume a USB mouse and keyboard are connected
> > > > > > > +HAVE_TOUCHSCREEN=0
> > > > > > > +HAVE_KEYBOARD=1
> > > > > > > diff --git
> > > > > > > a/meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-
> > > > > config/eme
> > > > > > > nlow-noemgd/xorg.conf
> > > > > > > b/meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-
> > > > > config/eme
> > > > > > > nlow-noemgd/xorg.conf
> > > > > > > new file mode 100644
> > > > > > > index 0000000..aa6f32b
> > > > > > > --- /dev/null
> > > > > > > +++ b/meta-emenlow/recipes-graphics/xorg-xserver/xserver-xf86-
> > > > > config
> > > > > > > +++ /emenlow-noemgd/xorg.conf
> > > > > > > @@ -0,0 +1,27 @@
> > > > > > > +Section "Device"
> > > > > > > + Identifier "gma500"
> > > > > > > + Driver "modesetting"
> > > > > > > + Option "SWCursor" "ON"
> > > > > > > +EndSection
> > > > > > > +
> > > > > > > +Section "Monitor"
> > > > > > > + Identifier "Generic Monitor"
> > > > > > > + Option "DPMS"
> > > > > > > +EndSection
> > > > > > > +
> > > > > > > +Section "Screen"
> > > > > > > + Identifier "Default Screen"
> > > > > > > + Device "gma500"
> > > > > > > + Monitor "Generic Monitor"
> > > > > > > + DefaultDepth 24
> > > > > > > +EndSection
> > > > > > > +
> > > > > > > +Section "ServerLayout"
> > > > > > > + Identifier "Default Layout"
> > > > > > > + Screen "Default Screen"
> > > > > > > +EndSection
> > > > > > > +
> > > > > > > +Section "ServerFlags"
> > > > > > > + Option "DontZap" "0"
> > > > > > > + Option "AutoAddDevices" "False"
> > > > > > > +EndSection
> > > > > > > diff --git
> > > > > > > a/meta-emenlow/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > > > > > > b/meta-emenlow/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > > > > > > index 1e908b5..2b22180 100644
> > > > > > > ---
> > > > > > > a/meta-emenlow/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > > > > > > +++ b/meta-emenlow/recipes-kernel/linux/linux-
> > yocto_3.4.bbappe
> > > > > > > +++ nd
> > > > > > > @@ -5,8 +5,16 @@ KMACHINE_emenlow = "emenlow"
> > > > > > > KBRANCH_emenlow = "standard/emenlow"
> > > > > > > KERNEL_FEATURES_emenlow_append = " features/drm-emgd"
> > > > > > >
> > > > > > > +COMPATIBLE_MACHINE_emenlow-noemgd = "emenlow-
> > noemgd"
> > > > > > > +KMACHINE_emenlow-noemgd = "emenlow"
> > > > > > > +KBRANCH_emenlow-noemgd = "standard/emenlow"
> > > > > > > +KERNEL_FEATURES_emenlow-noemgd_append = " features/drm-
> > > > > gma500/drm-gma600"
> > > > > > > +
> > > > > > > SRCREV_machine_pn-linux-yocto_emenlow ?= "${AUTOREV}"
> > > > > > > SRCREV_meta_pn-linux-yocto_emenlow ?= "${AUTOREV}"
> > > > > > > SRCREV_emgd_pn-linux-yocto_emenlow ?= "${AUTOREV}"
> > > > > > >
> > > > > > > +SRCREV_machine_pn-linux-yocto_emenlow-noemgd ?=
> > "${AUTOREV}"
> > > > > > > +SRCREV_meta_pn-linux-yocto_emenlow-noemgd ?=
> > "${AUTOREV}"
> > > > > > > +
> > > > > > > SRC_URI_emenlow =
> > > > >
> > "git://${KSRC_linux_yocto_3_4_repo};nocheckout=1;branch=${KBRANCH}
> > > > > ,${ KMETA},emgd-1.14;name=machine,meta,emgd"
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
More information about the meta-intel
mailing list