[meta-intel] [PATCH 0/3] linux-yocto: Update rt and tiny recipes

[Kamble, Nitin A]

Darren,

  Here are my test results.

For jasperforest:
   Boot is fine
   uname is fine
   Max Latency: 234 (from total 16 threads)

For Chiefriver
   Boot is fine
   uname is fine
   Max Latency: 56 (from total 4 threads)

Nitin


> -----Original Message-----
> From: Darren Hart [mailto:dvhart at linux.intel.com]
> Sent: Thursday, April 04, 2013 9:50 AM
> To: Zanussi, Tom
> Cc: Meta Intel; Kamble, Nitin A
> Subject: Re: [meta-intel] [PATCH 0/3] linux-yocto: Update rt and tiny recipes
> 
> I built ALL 8 images for the BSPs this morning. The images are available
> here:
> 
> http://fear.jf.intel.com/~dvhart/yocto/bsp/1.4-rt-images
> 
> The following are available for download:
> 	n450
> 	sugarbay
> 	fri2
> 	crownbay
> 	sys940x
> 	jasperforest
> 	chiefriver
> 	emenlow
> 
> I will test:
> 	n450
> 	atom-pc (done)
> 	sys940x
> 	fri2
> 
> For testing, just make sure it boots, verify the kernel version, and run the
> following for 10 minutes or longer and note the max latency:
> 
> $ cyclictest -p 90 -D 10m -t
> 
> This will run cyclictest as prio 90 for 10 minutes with one thread per CPU.
> 
> --
> Darren
> 
> On 04/03/2013 09:02 PM, Tom Zanussi wrote:
> > On Wed, 2013-04-03 at 20:11 -0700, Darren Hart wrote:
> >> Out for review but untested. Testing tomorrow morning.... meeting
> >> maelstrom permitting :(
> >>
> >
> > I have the hardware to test crownbay, sugarbay, and emenlow and can
> > volunteer to test those.  If you could send some instructions for the
> > best way to test rt and/or tiny, that would help though (otherwise I'd
> > just build core-image minimal and see if it boots. ;-)
> >
> > Tom
> >
> >> _______________________________________________
> >> meta-intel mailing list
> >> meta-intel at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-intel
> 
> --
> Darren Hart
> Intel Open Source Technology Center
> Yocto Project - Technical Lead - Linux Kernel