<div dir="ltr"><span style="font-family:arial,sans-serif;font-size:13px">>I'm tryng to build Freescale Yocto Image following "Freescale Yocto Project</span><br><span style="font-family:arial,sans-serif;font-size:13px">>Tutorial" instructions.</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>If I use master (or master-next) repository's branch to init repo:</span><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>fsl-community-bsp $ repo init \</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>-u </span><a href="https://github.com/Freescale/fsl-community-bsp-platform" target="_blank" style="font-family:arial,sans-serif;font-size:13px">https://github.com/Freescale/fsl-community-bsp-platform</a><span style="font-family:arial,sans-serif;font-size:13px"> \</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>-b master</span><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>when I bitbake an image, for example :</span><br style="font-family:arial,sans-serif;font-size:13px">

><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>build $ bitbake core-image-minimal</span><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>bitbake fails and displays following output:</span><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>WARNING: Variable sysroot_stage_all contains tabs, please remove these</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>(/home/sfera/fsl-community-</span><span style="font-family:arial,sans-serif;font-size:13px">bsp/sources/meta-fsl-arm/</span><span style="font-family:arial,sans-serif;font-size:13px">recipes-kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-fslc_3.12.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-fslc_3.12.bb</a><span style="font-family:arial,sans-serif;font-size:13px">)| ETA:  00:00:19</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>NOTE: Error during finalise of</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>/home/sfera/fsl-community-bsp/</span><span style="font-family:arial,sans-serif;font-size:13px">sources/meta-fsl-arm/recipes-</span><span style="font-family:arial,sans-serif;font-size:13px">kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-fslc_3.12.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-fslc_3.12.bb</a><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>ERROR: ExpansionError during parsing</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>/home/sfera/fsl-community-bsp/</span><span style="font-family:arial,sans-serif;font-size:13px">sources/meta-fsl-arm/recipes-</span><span style="font-family:arial,sans-serif;font-size:13px">kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-fslc_3.12.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-fslc_3.12.bb</a><span style="font-family:arial,sans-serif;font-size:13px">: Failure expanding variable sysroot_stage_all:</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>IndentationError: unexpected indent (<string>, line 4)</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>WARNING: Variable sysroot_stage_all contains tabs, please remove these</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>(/home/sfera/fsl-community-</span><span style="font-family:arial,sans-serif;font-size:13px">bsp/sources/meta-fsl-arm/</span><span style="font-family:arial,sans-serif;font-size:13px">recipes-kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-imx_3.0.35.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-imx_3.0.35.bb</a><span style="font-family:arial,sans-serif;font-size:13px">)</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>NOTE: Error during finalise of</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>/home/sfera/fsl-community-bsp/</span><span style="font-family:arial,sans-serif;font-size:13px">sources/meta-fsl-arm/recipes-</span><span style="font-family:arial,sans-serif;font-size:13px">kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-imx_3.0.35.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-imx_3.0.35.bb</a><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>WARNING: Variable sysroot_stage_all contains tabs, please remove these</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>(/home/sfera/fsl-community-</span><span style="font-family:arial,sans-serif;font-size:13px">bsp/sources/meta-fsl-arm/</span><span style="font-family:arial,sans-serif;font-size:13px">recipes-kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-imx_3.5.7.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-imx_3.5.7.bb</a><span style="font-family:arial,sans-serif;font-size:13px">)</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>NOTE: Error during finalise of</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>/home/sfera/fsl-community-bsp/</span><span style="font-family:arial,sans-serif;font-size:13px">sources/meta-fsl-arm/recipes-</span><span style="font-family:arial,sans-serif;font-size:13px">kernel/linux/</span><br style="font-family:arial,sans-serif;font-size:13px">

><a href="http://linux-imx_3.5.7.bb/" target="_blank" style="font-family:arial,sans-serif;font-size:13px">linux-imx_3.5.7.bb</a><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>Summary: There were 3 WARNING messages shown.</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>Summary: There was 1 ERROR message shown, returning a non-zero exit code.</span><br style="font-family:arial,sans-serif;font-size:13px">

><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>Note, if I use dora repository's branch to init repo, all the task are</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>executed successfully and bitbake generates required images.</span><br style="font-family:arial,sans-serif;font-size:13px">><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>Can anyone help me to solve this issue ?</span><br style="font-family:arial,sans-serif;font-size:13px">><div>></div><div><span style="font-family:arial,sans-serif;font-size:13px">>Thanks.</span><br style="font-family:arial,sans-serif;font-size:13px">

<span style="font-family:arial,sans-serif;font-size:13px">>Regards</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">>Fabio</span><br></div><div>

<span style="font-family:arial,sans-serif;font-size:13px"><br></span></div><div>I'm having the same issue with this after doing 'repo sync' today. I managed to get rid of some of the warnings by taking indents out from sources/meta-fsl-arm/recipes-kernel/linux/linux-imx.inc at the 'sysroot_stage_all_append()' <span style="font-family:arial,sans-serif;font-size:13px"><br>

</span></div><div>but still having issues with the error. Any idea how to solve the error/new patch for this?</div><div><br></div><div>Regards,</div><div>Stu</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">

On 13 November 2013 13:11,  <span dir="ltr"><<a href="mailto:meta-freescale-request@yoctoproject.org" target="_blank">meta-freescale-request@yoctoproject.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

Send meta-freescale mailing list submissions to<br>
        <a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
        <a href="https://lists.yoctoproject.org/listinfo/meta-freescale" target="_blank">https://lists.yoctoproject.org/listinfo/meta-freescale</a><br>
or, via email, send a message with subject or body 'help' to<br>
        <a href="mailto:meta-freescale-request@yoctoproject.org">meta-freescale-request@yoctoproject.org</a><br>
<br>
You can reach the person managing the list at<br>
        <a href="mailto:meta-freescale-owner@yoctoproject.org">meta-freescale-owner@yoctoproject.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of meta-freescale digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
   1. [meta-fsl-arm][PATCH 07/10] imx6qsabreauto.conf:  Add<br>
      gpmi-weim DTS (Otavio Salvador)<br>
   2. [meta-fsl-arm][PATCH 09/10] imx6slevk.conf: Add   ldo device<br>
      tree (Otavio Salvador)<br>
   3. [meta-fsl-arm][PATCH 08/10] imx6qsabresd.conf: Add        ldo and<br>
      hdcp DTS (Otavio Salvador)<br>
   4. [meta-fsl-arm][PATCH 10/10] imx6solosabresd.conf: Add ldo<br>
      device tree (Otavio Salvador)<br>
   5. Re: [meta-fsl-arm-extra][PATCH 1/2] m28evk: Do not        enable<br>
      GStreamer plugin (Marek Vasut)<br>
   6. Re: [meta-fsl-arm-extra][PATCH 2/2] m53evk: Do not        enable<br>
      GStreamer plugin (Marek Vasut)<br>
   7. Bitbake generates error during parsing (Fabio Labruna)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Tue, 12 Nov 2013 22:00:29 -0200<br>
From: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
To: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: [meta-freescale] [meta-fsl-arm][PATCH 07/10]<br>
        imx6qsabreauto.conf:    Add gpmi-weim DTS<br>
Message-ID:<br>
        <<a href="mailto:1384300832-11051-7-git-send-email-otavio@ossystems.com.br">1384300832-11051-7-git-send-email-otavio@ossystems.com.br</a>><br>
<br>
From: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
<br>
ENGR00269945: ARM: imx6: add the secondary sabreauto dts for pin conflict<br>
<br>
The patch is to solve the pin conflicts between devices that are<br>
currently added in imx6qdl-sabreauto dts file.  It has ecspi1, i2c3, and<br>
uart3 enabled while gpmi and weim disabled in the primary<br>
imx6qdl-sabreauto.dtsi, and creates the secondary<br>
imx6q/dl-sabreauto dts to have gpmi and weim enabled while others<br>
disabled.  Since usbh1 and usbotg depend on GPIO from max7310 on i2c3,<br>
they have to be disabled as well in the secondary sabreauto dts files.<br>
<br>
Change-Id: I6338e60fa8c1622b2a73e99aa1e3def0a2555bc2<br>
Signed-off-by: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
---<br>
 conf/machine/imx6qsabreauto.conf | 2 +-<br>
 1 file changed, 1 insertion(+), 1 deletion(-)<br>
<br>
diff --git a/conf/machine/imx6qsabreauto.conf b/conf/machine/imx6qsabreauto.conf<br>
index 4d367db..7455255 100644<br>
--- a/conf/machine/imx6qsabreauto.conf<br>
+++ b/conf/machine/imx6qsabreauto.conf<br>
@@ -7,7 +7,7 @@ require conf/machine/include/imx6sabreauto-common.inc<br>
<br>
 SOC_FAMILY = "mx6:mx6q"<br>
<br>
-KERNEL_DEVICETREE = "imx6q-sabreauto.dtb"<br>
+KERNEL_DEVICETREE = "imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb"<br>
<br>
 UBOOT_CONFIG ??= "sd"<br>
 UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"<br>
--<br>
1.8.4.rc3<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Tue, 12 Nov 2013 22:00:31 -0200<br>
From: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
To: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: [meta-freescale] [meta-fsl-arm][PATCH 09/10] imx6slevk.conf:<br>
        Add     ldo device tree<br>
Message-ID:<br>
        <<a href="mailto:1384300832-11051-9-git-send-email-otavio@ossystems.com.br">1384300832-11051-9-git-send-email-otavio@ossystems.com.br</a>><br>
<br>
From: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
<br>
ENGR00277895: dts: ARM: imx6: add ldo-enable dts files<br>
<br>
  Currently, we use different dts files to support ldo-bypass or ldo-enable, then<br>
we need add both dts files for the boards which can support ldo-bypass mode(all<br>
boards support ldo-enable at least). So for below boards we need add ldo-enable<br>
dts file so that we can use this to easily support ldo-enable mode:<br>
  1)mx6q-sabresd board:  ldo-bypass dts->mx6q-sabresd.dtb,<br>
                         ldo-enable dts->mx6q-sabresd-ldo.dtb<br>
  2)mx6q-sabresd board:  ldo-bypass dts->mx6dl-sabresd.dtb,<br>
                 ldo-enable dts->mx6dl-sabresd-ldo.dtb<br>
  3)mx6sl-evk board:     ldo-bypass dts->mx6sl-evk.dtb,<br>
                 ldo-enable dts->mx6sl-evk-ldo.dtb<br>
<br>
Change-Id: I997bf896a3d3fde482fe9c120a92c16d49817adb<br>
Signed-off-by: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
---<br>
 conf/machine/imx6slevk.conf | 2 ++<br>
 1 file changed, 2 insertions(+)<br>
<br>
diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf<br>
index da16c1d..990f48a 100644<br>
--- a/conf/machine/imx6slevk.conf<br>
+++ b/conf/machine/imx6slevk.conf<br>
@@ -8,6 +8,8 @@ include conf/machine/include/tune-cortexa9.inc<br>
<br>
 SOC_FAMILY = "mx6:mx6sl"<br>
<br>
+KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-ldo.dtb"<br>
+<br>
 UBOOT_MACHINE = "mx6slevk_config"<br>
<br>
 SERIAL_CONSOLE = "115200 ttymxc0"<br>
--<br>
1.8.4.rc3<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Tue, 12 Nov 2013 22:00:30 -0200<br>
From: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
To: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: [meta-freescale] [meta-fsl-arm][PATCH 08/10]<br>
        imx6qsabresd.conf: Add  ldo and hdcp DTS<br>
Message-ID:<br>
        <<a href="mailto:1384300832-11051-8-git-send-email-otavio@ossystems.com.br">1384300832-11051-8-git-send-email-otavio@ossystems.com.br</a>><br>
<br>
From: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
<br>
ENGR00274059-02 ARM: Add new dts for imx6q/imx6dl SabreSD hdcp<br>
<br>
hdcp ddc pins conflict with i2c2,<br>
add new dts file for imx6q and imx6dl SabreSD board,<br>
enable hdcp and disable i2c2 in these dts files.<br>
Remove hdmi pins property from mx6qdl-sabresd.dtsi.<br>
<br>
ENGR00279402-1 ARM: dts: imx6: add wdog reset source seclect in dts<br>
<br>
Some boards use another WDOG reset source to reboot system in ldo-bypass mode.<br>
We need add the property in board dts file so that we can easily know the<br>
WDOG reset source currently.<br>
<br>
For Sabresd, WDOG1 for ldo-enable mode(WDOG event), WDOG2 for ldo-bypass mode<br>
(reset external pmic to trigger POR event).<br>
For sl-evk board, there is no WDOG pin connected with external pmic as Sabresd<br>
, because mx6sl boot at 400Mhz. Then both ldo-enable and ldo-bypass mode use<br>
the common WDOG1 as reset source.<br>
<br>
ENGR00277895: dts: ARM: imx6: add ldo-enable dts files<br>
<br>
  Currently, we use different dts files to support ldo-bypass or ldo-enable, then<br>
we need add both dts files for the boards which can support ldo-bypass mode(all<br>
boards support ldo-enable at least). So for below boards we need add ldo-enable<br>
dts file so that we can use this to easily support ldo-enable mode:<br>
  1)mx6q-sabresd board:  ldo-bypass dts->mx6q-sabresd.dtb,<br>
                         ldo-enable dts->mx6q-sabresd-ldo.dtb<br>
  2)mx6q-sabresd board:  ldo-bypass dts->mx6dl-sabresd.dtb,<br>
                 ldo-enable dts->mx6dl-sabresd-ldo.dtb<br>
  3)mx6sl-evk board:     ldo-bypass dts->mx6sl-evk.dtb,<br>
                 ldo-enable dts->mx6sl-evk-ldo.dtb<br>
<br>
Change-Id: I38fb55249a002888c9da2c5e298acca089759876<br>
Signed-off-by: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
---<br>
 conf/machine/imx6qsabresd.conf | 2 +-<br>
 1 file changed, 1 insertion(+), 1 deletion(-)<br>
<br>
diff --git a/conf/machine/imx6qsabresd.conf b/conf/machine/imx6qsabresd.conf<br>
index f0eff4a..ccac357 100644<br>
--- a/conf/machine/imx6qsabresd.conf<br>
+++ b/conf/machine/imx6qsabresd.conf<br>
@@ -7,7 +7,7 @@ require conf/machine/include/imx6sabresd-common.inc<br>
<br>
 SOC_FAMILY = "mx6:mx6q"<br>
<br>
-KERNEL_DEVICETREE = "imx6q-sabresd.dtb"<br>
+KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb"<br>
<br>
 UBOOT_CONFIG ??= "sd"<br>
 UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard"<br>
--<br>
1.8.4.rc3<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Tue, 12 Nov 2013 22:00:32 -0200<br>
From: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
To: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: [meta-freescale] [meta-fsl-arm][PATCH 10/10]<br>
        imx6solosabresd.conf:   Add ldo device tree<br>
Message-ID:<br>
        <<a href="mailto:1384300832-11051-10-git-send-email-otavio@ossystems.com.br">1384300832-11051-10-git-send-email-otavio@ossystems.com.br</a>><br>
<br>
From: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
<br>
ENGR00277895: dts: ARM: imx6: add ldo-enable dts files<br>
<br>
  Currently, we use different dts files to support ldo-bypass or ldo-enable, then<br>
we need add both dts files for the boards which can support ldo-bypass mode(all<br>
boards support ldo-enable at least). So for below boards we need add ldo-enable<br>
dts file so that we can use this to easily support ldo-enable mode:<br>
  1)mx6q-sabresd board:  ldo-bypass dts->mx6q-sabresd.dtb,<br>
                         ldo-enable dts->mx6q-sabresd-ldo.dtb<br>
  2)mx6q-sabresd board:  ldo-bypass dts->mx6dl-sabresd.dtb,<br>
                 ldo-enable dts->mx6dl-sabresd-ldo.dtb<br>
  3)mx6sl-evk board:     ldo-bypass dts->mx6sl-evk.dtb,<br>
                 ldo-enable dts->mx6sl-evk-ldo.dtb<br>
<br>
Change-Id: I261c516495e3921fb1c2d8937d96fb6e3a23e87b<br>
Signed-off-by: Lauren Post <<a href="mailto:lauren.post@freescale.com">lauren.post@freescale.com</a>><br>
---<br>
 conf/machine/imx6solosabresd.conf | 2 +-<br>
 1 file changed, 1 insertion(+), 1 deletion(-)<br>
<br>
diff --git a/conf/machine/imx6solosabresd.conf b/conf/machine/imx6solosabresd.conf<br>
index cfc30d2..5782268 100644<br>
--- a/conf/machine/imx6solosabresd.conf<br>
+++ b/conf/machine/imx6solosabresd.conf<br>
@@ -7,7 +7,7 @@ require conf/machine/include/imx6sabresd-common.inc<br>
<br>
 SOC_FAMILY = "mx6:mx6s"<br>
<br>
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb"<br>
+KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb"<br>
<br>
 PREFERRED_PROVIDER_u-boot = "u-boot-imx"<br>
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"<br>
--<br>
1.8.4.rc3<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Wed, 13 Nov 2013 01:08:09 +0100<br>
From: Marek Vasut <<a href="mailto:marex@denx.de">marex@denx.de</a>><br>
To: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
Cc: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: Re: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] m28evk:<br>
        Do not  enable GStreamer plugin<br>
Message-ID: <<a href="mailto:201311130108.09698.marex@denx.de">201311130108.09698.marex@denx.de</a>><br>
Content-Type: Text/Plain;  charset="us-ascii"<br>
<br>
Dear Otavio Salvador,<br>
<br>
> The kernel used for this board is based in the mainline kernel and<br>
> does not provide the Freescale specific headers so we cannot build the<br>
> GStreamer specific plugin.<br>
><br>
> Change-Id: Icd9e08c3e774ea3a0df2c532ef52619d378a4fca<br>
> Signed-off-by: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
> ---<br>
>  conf/machine/m28evk.conf | 3 +++<br>
>  1 file changed, 3 insertions(+)<br>
><br>
> diff --git a/conf/machine/m28evk.conf b/conf/machine/m28evk.conf<br>
> index abe7c03..76d5b3d 100644<br>
> --- a/conf/machine/m28evk.conf<br>
> +++ b/conf/machine/m28evk.conf<br>
> @@ -21,3 +21,6 @@ SERIAL_CONSOLE = "115200 ttyAMA0"<br>
>  KERNEL_IMAGETYPE = "uImage"<br>
><br>
>  MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"<br>
> +<br>
> +# Avoid adding gst-fsl-plugin as we use non-FSL kernel<br>
> +MACHINE_GSTREAMER_PLUGIN_m28evk = ""<br>
<br>
Acked-by: Marek Vasut <<a href="mailto:marex@denx.de">marex@denx.de</a>><br>
<br>
Best regards,<br>
Marek Vasut<br>
<br>
<br>
------------------------------<br>
<br>
Message: 6<br>
Date: Wed, 13 Nov 2013 01:08:02 +0100<br>
From: Marek Vasut <<a href="mailto:marex@denx.de">marex@denx.de</a>><br>
To: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
Cc: meta-freescale Mailing List <<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a>><br>
Subject: Re: [meta-freescale] [meta-fsl-arm-extra][PATCH 2/2] m53evk:<br>
        Do not  enable GStreamer plugin<br>
Message-ID: <<a href="mailto:201311130108.02707.marex@denx.de">201311130108.02707.marex@denx.de</a>><br>
Content-Type: Text/Plain;  charset="us-ascii"<br>
<br>
Dear Otavio Salvador,<br>
<br>
> The kernel used for this board is based in the mainline kernel and<br>
> does not provide the Freescale specific headers so we cannot build the<br>
> GStreamer specific plugin.<br>
><br>
> Change-Id: I382759bc05a74c638cb80dd61ce950bf896d33cf<br>
> Signed-off-by: Otavio Salvador <<a href="mailto:otavio@ossystems.com.br">otavio@ossystems.com.br</a>><br>
> ---<br>
>  conf/machine/m53evk.conf | 3 +++<br>
>  1 file changed, 3 insertions(+)<br>
><br>
> diff --git a/conf/machine/m53evk.conf b/conf/machine/m53evk.conf<br>
> index e2fbc56..20f0684 100644<br>
> --- a/conf/machine/m53evk.conf<br>
> +++ b/conf/machine/m53evk.conf<br>
> @@ -21,3 +21,6 @@ IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard"<br>
>  SERIAL_CONSOLE = "115200 ttymxc1"<br>
><br>
>  MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"<br>
> +<br>
> +# Avoid adding gst-fsl-plugin as we use non-FSL kernel<br>
> +MACHINE_GSTREAMER_PLUGIN_m53evk = ""<br>
<br>
Acked-by: Marek Vasut <<a href="mailto:marex@denx.de">marex@denx.de</a>><br>
<br>
Best regards,<br>
Marek Vasut<br>
<br>
<br>
------------------------------<br>
<br>
Message: 7<br>
Date: Wed, 13 Nov 2013 14:10:55 +0100<br>
From: Fabio Labruna <<a href="mailto:fabio@siddha.it">fabio@siddha.it</a>><br>
To: <a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a><br>
Subject: [meta-freescale] Bitbake generates error during parsing<br>
Message-ID:<br>
        <CAANnQG11egUo3B03O=fw1T=<a href="mailto:Qaye_UhrnyKhZQ1o1hjCp9e3FpA@mail.gmail.com">Qaye_UhrnyKhZQ1o1hjCp9e3FpA@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
I'm tryng to build Freescale Yocto Image following "Freescale Yocto Project<br>
Tutorial" instructions.<br>
If I use master (or master-next) repository's branch to init repo:<br>
<br>
fsl-community-bsp $ repo init \<br>
-u <a href="https://github.com/Freescale/fsl-community-bsp-platform" target="_blank">https://github.com/Freescale/fsl-community-bsp-platform</a> \<br>
 -b master<br>
<br>
when I bitbake an image, for example :<br>
<br>
build $ bitbake core-image-minimal<br>
<br>
bitbake fails and displays following output:<br>
<br>
WARNING: Variable sysroot_stage_all contains tabs, please remove these<br>
(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-fslc_3.12.bb" target="_blank">linux-fslc_3.12.bb</a>)| ETA:  00:00:19<br>
NOTE: Error during finalise of<br>
/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-fslc_3.12.bb" target="_blank">linux-fslc_3.12.bb</a><br>
ERROR: ExpansionError during parsing<br>
/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-fslc_3.12.bb" target="_blank">linux-fslc_3.12.bb</a>: Failure expanding variable sysroot_stage_all:<br>
IndentationError: unexpected indent (<string>, line 4)<br>
WARNING: Variable sysroot_stage_all contains tabs, please remove these<br>
(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-imx_3.0.35.bb" target="_blank">linux-imx_3.0.35.bb</a>)<br>
NOTE: Error during finalise of<br>
/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-imx_3.0.35.bb" target="_blank">linux-imx_3.0.35.bb</a><br>
WARNING: Variable sysroot_stage_all contains tabs, please remove these<br>
(/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-imx_3.5.7.bb" target="_blank">linux-imx_3.5.7.bb</a>)<br>
NOTE: Error during finalise of<br>
/home/sfera/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/<br>
<a href="http://linux-imx_3.5.7.bb" target="_blank">linux-imx_3.5.7.bb</a><br>
<br>
Summary: There were 3 WARNING messages shown.<br>
Summary: There was 1 ERROR message shown, returning a non-zero exit code.<br>
<br>
<br>
Note, if I use dora repository's branch to init repo, all the task are<br>
executed successfully and bitbake generates required images.<br>
<br>
Can anyone help me to solve this issue ?<br>
<br>
Thanks.<br>
Regards<br>
Fabio<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131113/af53ce3a/attachment.html" target="_blank">http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131113/af53ce3a/attachment.html</a>><br>


<br>
------------------------------<br>
<br>
_______________________________________________<br>
meta-freescale mailing list<br>
<a href="mailto:meta-freescale@yoctoproject.org">meta-freescale@yoctoproject.org</a><br>
<a href="https://lists.yoctoproject.org/listinfo/meta-freescale" target="_blank">https://lists.yoctoproject.org/listinfo/meta-freescale</a><br>
<br>
<br>
End of meta-freescale Digest, Vol 13, Issue 34<br>
**********************************************<br>
</blockquote></div><br></div>