[meta-freescale] [3rdparty][PATCH 4/6] ccimx6ulsbcpro: Add machine configuration

[Alex Gonzalez]

The ConnectCore 6UL Single Board Computer (SBC) Pro contains the
ConnectCore 6UL System-On-Module.

Its hardware specifications are:

    * 256MB DDR3 memory
    * On module 256MB NAND flash
    * Dual 10/100 Ethernet
    * USB Host and USB OTG
    * Parallel RGB display header
    * LVDS display header
    * CSI camera
    * GPIO header
    * I2C, SPI, CAN headers
    * PCIe mini card and micro SIM slot
    * MicroSD external storage
    * On board 4GB eMMC flash
    * Audio headphone, line in/out, microphone lines

The build artifacts are:

U-Boot images: u-boot.imx
Linux partition image: <image name>.boot.ubifs
Root filesystem image: <image name>.ubifs

Root filesystem tarball (for network booting): <image name>.tar.bz2

To program a board from the U-boot prompt, copy the U-Boot, Linux and
root filesystem partition images to your TFTP server root and do:

env set ipaddr <target ip address>
env set serverip <TFTP server ip address>
update uboot tftp u-boot.imx
update linux tftp <image name>.boot.ubifs
update rootfs tftp <image name>.ubifs

More details about the SBC can be found at:
https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-pro

Signed-off-by: Alex Gonzalez <alex.gonzalez at digi.com>
---
 conf/machine/ccimx6ulsbcpro.conf | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 conf/machine/ccimx6ulsbcpro.conf

diff --git a/conf/machine/ccimx6ulsbcpro.conf b/conf/machine/ccimx6ulsbcpro.conf
new file mode 100644
index 000000000000..5b3d09a3d556
--- /dev/null
+++ b/conf/machine/ccimx6ulsbcpro.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: ConnecCore 6UL SBC Pro
+#@SOC: i.MX6UL
+#@DESCRIPTION: Machine configuration for ConnectCore 6UL SBC Pro board.
+#@MAINTAINER: Alex Gonzalez <alex.gonzalez at digi.com>
+
+include conf/machine/include/ccimx6ulsom.conf
+
+KERNEL_DEVICETREE = "imx6ul-ccimx6ulsbcpro.dtb"
+
+SERIAL_CONSOLES = "115200;ttymxc4"