[meta-freescale] [3rdparty][PATCH V2][master] u-boot-toradex-fw-utils: add new recipe
Ming Liu
liu.ming50 at gmail.com
Tue Nov 20 05:23:47 PST 2018
OK, will send a V3 dropping it.
//Ming Liu
Max Krummenacher <max.krummenacher at toradex.com> 於 2018年11月20日 週二 下午2:04寫道：
> Hi Ming,
>
> One more nitpick that I didn't spot in v1 of the patch, sorry.
>
> PV has now a leading v, "v2016.11..." for both U-Boot and U-Boot-FW-Utils.
> That is a change to how it was before and how our non NXP boards get
> their U-Boot version. Could we drop the 'v'?
>
> Otherwise:
> Acked-by: Max Krummenacher <max.krummenacher at toradex.com>
>
> Thank you for the work.
>
> Regards
> Max
>
> On Mon, 2018-11-19 at 22:25 +0100, liu.ming50 at gmail.com wrote:
> > From: Ming Liu <liu.ming50 at gmail.com>
> >
> > I observed a following build issue:
> > > ***
> > > *** Can't find default configuration
> "arch/../configs/colibri_imx7_emmc_defconfig"!
> > > ***
> > > scripts/kconfig/Makefile:128: recipe for target
> 'colibri_imx7_emmc_defconfig' failed
> >
> > it's due to the colibri_imx7_emmc_defconfig does not exist in the
> > source, because u-boot-toradex and u-boot-fw-utils are not built from
> > same source. so the toradex machine specific uboot configs do not
> > present in the default u-boot-fw-utils source.
> >
> > To fix it, a new u-boot-toradex-fw-utils recipe is added, it uses the
> > same source with u-boot-toradex, some common code is split out to
> > u-boot-toradex.inc, to be shared by both u-boot-toradex and
> > u-boot-toradex-fw-utils.
> >
> > And we need set PREFERRED_PROVIDER and PREFERRED_RPROVIDER in machine
> > configs to u-boot-toradex-fw-utils.
> >
> > Some files derive from u-boot-toradex-fw-utils recipe of:
> > git://git.toradex.com/meta-toradex-nxp.git
> >
> > Signed-off-by: Ming Liu <liu.ming50 at gmail.com>
> > ---
> > conf/machine/apalis-imx6.conf | 3 ++
> > conf/machine/colibri-imx6.conf | 3 ++
> > conf/machine/colibri-imx6ull.conf | 3 ++
> > conf/machine/colibri-imx7.conf | 2 +
> > conf/machine/colibri-vf.conf | 2 +
> > ...ross-compiling-tools-when-HOSTCC-is-overr.patch | 54
> ++++++++++++++++++++++
> > .../colibri-imx6ull/fw_env.config | 10 ++++
> > .../colibri-imx7/fw_env.config | 10 ++++
> > .../u-boot/u-boot-toradex-fw-utils/fw_env.config | 22 +++++++++
> > .../u-boot-toradex-fw-utils/mx6/fw_env.config | 17 +++++++
> > .../u-boot-toradex-fw-utils/vf/fw_env.config | 10 ++++
> > .../u-boot/u-boot-toradex-fw-utils_2016.11.bb | 42
> +++++++++++++++++
> > recipes-bsp/u-boot/u-boot-toradex.inc | 21 ---------
> > recipes-bsp/u-boot/u-boot-toradex_2016.11.bb | 10 ++--
> > recipes-bsp/u-boot/u-boot-toradex_2016.11.inc | 20 ++++++++
> > 15 files changed, 203 insertions(+), 26 deletions(-)
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
> > create mode 100644
> recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
> > create mode 100644 recipes-bsp/u-boot/
> u-boot-toradex-fw-utils_2016.11.bb
> > delete mode 100644 recipes-bsp/u-boot/u-boot-toradex.inc
> > create mode 100644 recipes-bsp/u-boot/u-boot-toradex_2016.11.inc
> >
> > diff --git a/conf/machine/apalis-imx6.conf
> b/conf/machine/apalis-imx6.conf
> > index 47a9d87..a9b9af0 100644
> > --- a/conf/machine/apalis-imx6.conf
> > +++ b/conf/machine/apalis-imx6.conf
> > @@ -20,6 +20,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +
> > SPL_BINARY = "SPL"
> > # The SPL configures the DDR RAM depending on the module it runs on.
> Thus there
> > # is no need to distingush between the different module types.
> > diff --git a/conf/machine/colibri-imx6.conf
> b/conf/machine/colibri-imx6.conf
> > index d3c2d00..0c6d7cc 100644
> > --- a/conf/machine/colibri-imx6.conf
> > +++ b/conf/machine/colibri-imx6.conf
> > @@ -20,6 +20,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +
> > SPL_BINARY = "SPL"
> > UBOOT_CONFIG ??= "spl"
> > UBOOT_CONFIG[spl] = "colibri_imx6_defconfig,,u-boot.img"
> > diff --git a/conf/machine/colibri-imx6ull.conf
> b/conf/machine/colibri-imx6ull.conf
> > index 748a12b..a70dd42 100644
> > --- a/conf/machine/colibri-imx6ull.conf
> > +++ b/conf/machine/colibri-imx6ull.conf
> > @@ -17,6 +17,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +
> > UBOOT_BINARY = "u-boot-nand.imx"
> > UBOOT_MAKE_TARGET = "u-boot-nand.imx"
> > UBOOT_MACHINE ?= "colibri-imx6ull_defconfig"
> > diff --git a/conf/machine/colibri-imx7.conf
> b/conf/machine/colibri-imx7.conf
> > index 51048e4..2ad296b 100644
> > --- a/conf/machine/colibri-imx7.conf
> > +++ b/conf/machine/colibri-imx7.conf
> > @@ -20,6 +20,8 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> >
> > # U-Boot NAND binary includes 0x400 padding required for NAND boot
> > UBOOT_BINARY = "u-boot-nand.imx"
> > diff --git a/conf/machine/colibri-vf.conf b/conf/machine/colibri-vf.conf
> > index 2f7a5d8..a03853d 100644
> > --- a/conf/machine/colibri-vf.conf
> > +++ b/conf/machine/colibri-vf.conf
> > @@ -20,6 +20,8 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
> > PREFERRED_PROVIDER_virtual/kernel-module-mcc ?=
> "kernel-module-mcc-toradex"
> > PREFERRED_PROVIDER_virtual/kernel-module-mcc-dev ?=
> "kernel-module-mcc-toradex"
> > PREFERRED_VERSION_mqxboot ?= "1.%"
> > diff --git
> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
> > new file mode 100644
> > index 0000000..2c087e8
> > --- /dev/null
> > +++
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
> > @@ -0,0 +1,54 @@
> > +From 3b0825296aeba69c2cbfd3e179db2e9cbe5e70d7 Mon Sep 17 00:00:00 2001
> > +From: Masahiro Yamada <yamada.masahiro at socionext.com>
> > +Date: Mon, 13 Mar 2017 17:43:16 +0900
> > +Subject: [PATCH] tools: fix cross-compiling tools when HOSTCC is
> overridden
> > +
> > +Upstream-Status: Backport
> > +
> > +Richard reported U-Boot tools issues in OpenEmbedded/Yocto project.
> > +
> > +OE needs to be able to change the default compiler. If we pass in
> > +HOSTCC through the make command, it overwrites all HOSTCC instances,
> > +including ones in tools/Makefile and tools/env/Makefile, which breaks
> > +"make cross_tools" and "make env", respectively.
> > +
> > +Add "override" directives to avoid overriding HOSTCC instances that
> > +really need to point to the cross-compiler.
> > +
> > +Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> > +Reported-by: Richard Purdie <richard.purdie at linuxfoundation.org>
> > +Reviewed-by: Simon Glass <sjg at chromium.org>
> > +---
> > + tools/Makefile | 2 +-
> > + tools/env/Makefile | 2 +-
> > + 2 files changed, 2 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/tools/Makefile b/tools/Makefile
> > +index 1c840d7..a894b5c 100644
> > +--- a/tools/Makefile
> > ++++ b/tools/Makefile
> > +@@ -262,7 +262,7 @@ $(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
> > + subdir- += env
> > +
> > + ifneq ($(CROSS_BUILD_TOOLS),)
> > +-HOSTCC = $(CC)
> > ++override HOSTCC = $(CC)
> > +
> > + quiet_cmd_crosstools_strip = STRIP $^
> > + cmd_crosstools_strip = $(STRIP) $^; touch $@
> > +diff --git a/tools/env/Makefile b/tools/env/Makefile
> > +index 38ad118..95b28c0 100644
> > +--- a/tools/env/Makefile
> > ++++ b/tools/env/Makefile
> > +@@ -8,7 +8,7 @@
> > + # fw_printenv is supposed to run on the target system, which means it
> should be
> > + # built with cross tools. Although it may look weird, we only replace
> "HOSTCC"
> > + # with "CC" here for the maximum code reuse of scripts/Makefile.host.
> > +-HOSTCC = $(CC)
> > ++override HOSTCC = $(CC)
> > +
> > + # Compile for a hosted environment on the target
> > + HOST_EXTRACFLAGS = $(patsubst -I%,-idirafter%, $(filter -I%,
> $(UBOOTINCLUDE))) \
> > +--
> > +2.7.4
> > +
> > diff --git
> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
> > new file mode 100644
> > index 0000000..930bcee
> > --- /dev/null
> > +++
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
> > @@ -0,0 +1,10 @@
> > +# Configuration file for fw_(printenv/setenv) utility.
> > +# Up to two entries are valid, in this case the redundant
> > +# environment sector is assumed present.
> > +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash.
> > +# Futhermore, if the Flash sector size is ommitted, this value is
> assumed to
> > +# be the same as the Environment size, which is valid for NOR and
> SPI-dataflash
> > +
> > +# MTD device name Device offset Env. size Flash sector size
> Number of sectors
> > +# Colibri iMX6ULL
> > +/dev/mtd3 0x00000000 0x00020000 0x20000
> 4
> > diff --git
> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
> > new file mode 100644
> > index 0000000..b59116d
> > --- /dev/null
> > +++
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
> > @@ -0,0 +1,10 @@
> > +# Configuration file for fw_(printenv/setenv) utility.
> > +# Up to two entries are valid, in this case the redundant
> > +# environment sector is assumed present.
> > +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash.
> > +# Futhermore, if the Flash sector size is ommitted, this value is
> assumed to
> > +# be the same as the Environment size, which is valid for NOR and
> SPI-dataflash
> > +
> > +# MTD device name Device offset Env. size Flash sector size
> Number of sectors
> > +# Colibri iMX7
> > +/dev/mtd3 0x00000000 0x00020000 0x20000
> 4
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
> > new file mode 100644
> > index 0000000..e054ccb
> > --- /dev/null
> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
> > @@ -0,0 +1,22 @@
> > +# Configuration file for fw_(printenv/setenv) utility.
> > +# Up to two entries are valid, in this case the redundant
> > +# environment sector is assumed present.
> > +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash.
> > +# Futhermore, if the Flash sector size is ommitted, this value is
> assumed to
> > +# be the same as the Environment size, which is valid for NOR and
> SPI-dataflash
> > +
> > +# NOR example
> > +# MTD device name Device offset Env. size Flash sector size
> Number of sectors
> > +#/dev/mtd1 0x0000 0x4000 0x4000
> > +#/dev/mtd2 0x0000 0x4000 0x4000
> > +
> > +# MTD SPI-dataflash example
> > +# MTD device name Device offset Env. size Flash sector size
> Number of sectors
> > +#/dev/mtd5 0x4200 0x4200
> > +#/dev/mtd6 0x4200 0x4200
> > +
> > +# NAND example
> > +#/dev/mtd0 0x4000 0x4000 0x20000
> 2
> > +
> > +# Block device example
> > +#/dev/mmcblk0 0xc0000 0x20000
> > diff --git
> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
> > new file mode 100644
> > index 0000000..a9e724e
> > --- /dev/null
> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
> > @@ -0,0 +1,17 @@
> > +# Configuration file for fw_(printenv/setenv) utility.
> > +# Up to two entries are valid, in this case the redundant
> > +# environment sector is assumed present.
> > +# Device offset must be prefixed with 0x to be parsed as a hexadecimal
> value.
> > +# On a block device a negative offset is treated as a backwards offset
> from the
> > +# end of the device/partition, rather than a forwards offset from the
> start.
> > +
> > +# Colibri iMX6/Apalis iMX6
> > +# U-Boot environment is stored at the end of the first eMMC boot
> partition
> > +# hence use a negative value. The environment is just in front of the
> config
> > +# block which occupies the last sector (hence -0x200)
> > +# Note that /dev/mmcblk0boot0 by default is read only
> > +# To use fw_setenv you have to first make it writeable, on the cmdline
> e.g. by
> > +# $ echo 0 > /sys/block/mmcblk0boot0/force_ro
> > +
> > +# Block device name Device offset Env. size
> > +/dev/mmcblk0boot0 -0x2200 0x2000
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
> > new file mode 100644
> > index 0000000..51f09d1
> > --- /dev/null
> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
> > @@ -0,0 +1,10 @@
> > +# Configuration file for fw_(printenv/setenv) utility.
> > +# Up to two entries are valid, in this case the redundant
> > +# environment sector is assumed present.
> > +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash.
> > +# Futhermore, if the Flash sector size is ommitted, this value is
> assumed to
> > +# be the same as the Environment size, which is valid for NOR and
> SPI-dataflash
> > +
> > +# MTD device name Device offset Env. size Flash sector size
> Number of sectors
> > +# Colibri VF61
> > +/dev/mtd2 0x00000000 0x00020000 0x20000
> 4
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
> > new file mode 100644
> > index 0000000..727c0a8
> > --- /dev/null
> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
> > @@ -0,0 +1,42 @@
> > +require recipes-bsp/u-boot/u-boot-toradex_${PV}.inc
> > +
> > +SUMMARY = "U-Boot bootloader fw_printenv/setenv utilities"
> > +
> > +SRC_URI +=
> "file://0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch \
> > + file://fw_env.config \
> > +"
> > +
> > +DEPENDS += "mtd-utils"
> > +
> > +INSANE_SKIP_${PN} = "already-stripped"
> > +EXTRA_OEMAKE_class-target = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${CC}
> ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"
> V=1'
> > +EXTRA_OEMAKE_class-cross = 'ARCH=${TARGET_ARCH} CC="${CC} ${CFLAGS}
> ${LDFLAGS}" V=1'
> > +
> > +inherit uboot-config
> > +
> > +do_compile () {
> > + oe_runmake ${UBOOT_MACHINE}
> > + oe_runmake env
> > +}
> > +
> > +do_install () {
> > + install -d ${D}${base_sbindir}
> > + install -d ${D}${sysconfdir}
> > + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${base_sbindir}/fw_printenv
> > + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${base_sbindir}/fw_setenv
> > + install -m 0644 ${WORKDIR}/fw_env.config
> ${D}${sysconfdir}/fw_env.config
> > +}
> > +
> > +do_install_class-cross () {
> > + install -d ${D}${bindir_cross}
> > + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${bindir_cross}/fw_printenv
> > + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${bindir_cross}/fw_setenv
> > +}
> > +
> > +SYSROOT_DIRS_append_class-cross = " ${bindir_cross}"
> > +
> > +PROVIDES += "u-boot-fw-utils"
> > +RPROVIDES_${PN} += "u-boot-fw-utils"
> > +
> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
> > +BBCLASSEXTEND = "cross"
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex.inc
> b/recipes-bsp/u-boot/u-boot-toradex.inc
> > deleted file mode 100644
> > index 67e9976..0000000
> > --- a/recipes-bsp/u-boot/u-boot-toradex.inc
> > +++ /dev/null
> > @@ -1,21 +0,0 @@
> > -# Copyright (C) 2015 Toradex AG
> > -# Based on u-boot-fslc.inc Copyright (C) 2012-2014 O.S. Systems
> Software LTDA
> > -# Released under the MIT license (see COPYING.MIT for the terms)
> > -
> > -require recipes-bsp/u-boot/u-boot.inc
> > -
> > -inherit fsl-u-boot-localversion
> > -
> > -SUMMARY = "U-Boot bootloader with support for Toradex Computer on
> Modules"
> > -LICENSE = "GPLv2+"
> > -LIC_FILES_CHKSUM =
> "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
> > -
> > -PROVIDES += "u-boot"
> > -
> > -SRC_URI = "git://git.toradex.com/u-boot-toradex.git;branch=${SRCBRANCH}
> <http://git.toradex.com/u-boot-toradex.git;branch=$%7BSRCBRANCH%7D>"
> > -
> > -S = "${WORKDIR}/git"
> > -
> > -inherit dtc-145
> > -
> > -PACKAGE_ARCH = "${MACHINE_ARCH}"
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
> b/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
> > index f54eeaa..e409131 100644
> > --- a/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
> > +++ b/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
> > @@ -1,8 +1,8 @@
> > -require recipes-bsp/u-boot/u-boot-toradex.inc
> > +require recipes-bsp/u-boot/u-boot.inc
> > +require recipes-bsp/u-boot/u-boot-toradex_${PV}.inc
> >
> > LOCALVERSION = "-2.8.3"
> > -PV_append = "+git${SRCPV}"
> >
> > -SRCREV = "aca804c9ddadbf34a8ff82779e5598ec5e319f23"
> > -SRCBRANCH = "2016.11-toradex"
> > -COMPATIBLE_MACHINE = "(mx6|mx7|vf|use-mainline-bsp)"
> > +PROVIDES += "u-boot"
> > +
> > +inherit fsl-u-boot-localversion dtc-145
> > diff --git a/recipes-bsp/u-boot/u-boot-toradex_2016.11.inc
> b/recipes-bsp/u-boot/u-boot-toradex_2016.11.inc
> > new file mode 100644
> > index 0000000..166c1b5
> > --- /dev/null
> > +++ b/recipes-bsp/u-boot/u-boot-toradex_2016.11.inc
> > @@ -0,0 +1,20 @@
> > +# Copyright (C) 2015 Toradex AG
> > +# Based on u-boot-fslc.inc Copyright (C) 2012-2014 O.S. Systems
> Software LTDA
> > +# Released under the MIT license (see COPYING.MIT for the terms)
> > +
> > +SUMMARY = "U-Boot bootloader with support for Toradex Computer on
> Modules"
> > +LICENSE = "GPLv2+"
> > +LIC_FILES_CHKSUM =
> "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
> > +
> > +SRC_URI = "git://git.toradex.com/u-boot-toradex.git;branch=${SRCBRANCH}
> <http://git.toradex.com/u-boot-toradex.git;branch=$%7BSRCBRANCH%7D>"
> > +
> > +SRCREV ?= "aca804c9ddadbf34a8ff82779e5598ec5e319f23"
> > +SRCBRANCH ?= "2016.11-toradex"
> > +
> > +S = "${WORKDIR}/git"
> > +
> > +PV = "v2016.11+git${SRCPV}"
> > +
> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
> > +
> > +COMPATIBLE_MACHINE = "(mx6|mx7|vf|use-mainline-bsp)"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20181120/a87b9231/attachment.html>
More information about the meta-freescale
mailing list