[meta-freescale] [3rdparty][PATCH][master] u-boot-toradex-fw-utils: add new recipe
Ming Liu
liu.ming50 at gmail.com
Mon Nov 19 13:26:42 PST 2018
Hi, Max:
I have just sent a V2 patch with the modification as you suggested, please
kindly help me review it.
the best,
thank you
Ming Liu <liu.ming50 at gmail.com> 於 2018年11月19日 週一 下午3:53寫道：
> Thanks for the reviewing, will fix those in V2.
>
> the best,
> thank you
>
> Max Krummenacher <max.krummenacher at toradex.com> 於 2018年11月19日 週一 下午3:42寫道：
>
>> Hi Ming,
>>
>> Thank you for up-streaming this to meta-freescale-3rdparty.
>> See inline comments below, all starting with "Max:".
>>
>> Best Regards.
>> Max
>>
>> On Sun, 2018-11-18 at 20:56 +0100, liu.ming50 at gmail.com wrote:
>> > From: Ming Liu <liu.ming50 at gmail.com>
>> >
>> > I observed a following build issue:
>> > > ***
>> > > *** Can't find default configuration
>> "arch/../configs/colibri_imx7_emmc_defconfig"!
>> > > ***
>> > > scripts/kconfig/Makefile:128: recipe for target
>> 'colibri_imx7_emmc_defconfig' failed
>> >
>> > it's due to the colibri_imx7_emmc_defconfig does not exist in the
>> > source, because u-boot-toradex and u-boot-fw-utils are not built from
>> > same source. so the toradex machine specific uboot configs do not
>> > present in the default u-boot-fw-utils source.
>> >
>> > To fix it, a new u-boot-toradex-fw-utils recipe is added, it uses the
>> > same source with u-boot-toradex, some common code is split out to
>> > u-boot-toradex.inc, to be shared by both u-boot-toradex and
>> > u-boot-toradex-fw-utils.
>> >
>> > And we need set PREFERRED_PROVIDER and PREFERRED_RPROVIDER in machine
>> > configs to u-boot-toradex-fw-utils.
>> >
>> > Some files derive from u-boot-toradex-fw-utils recipe of:
>> > git://git.toradex.com/meta-toradex-nxp.git
>> >
>> > Signed-off-by: Ming Liu <liu.ming50 at gmail.com>
>> > ---
>> > conf/machine/apalis-imx6.conf | 3 ++
>> > conf/machine/colibri-imx6.conf | 3 ++
>> > conf/machine/colibri-imx6ull.conf | 3 ++
>> > conf/machine/colibri-imx7.conf | 2 +
>> > conf/machine/colibri-vf.conf | 2 +
>> > ...ross-compiling-tools-when-HOSTCC-is-overr.patch | 54
>> ++++++++++++++++++++++
>> > .../colibri-imx6ull/fw_env.config | 11 +++++
>> > .../colibri-imx7/fw_env.config | 11 +++++
>> > .../u-boot/u-boot-toradex-fw-utils/fw_env.config | 22 +++++++++
>> > .../u-boot-toradex-fw-utils/mx6/fw_env.config | 15 ++++++
>> > .../u-boot-toradex-fw-utils/vf/fw_env.config | 11 +++++
>> > .../u-boot/u-boot-toradex-fw-utils_2016.11.bb | 42
>> +++++++++++++++++
>> > recipes-bsp/u-boot/u-boot-toradex.inc | 11 ++---
>> > recipes-bsp/u-boot/u-boot-toradex_2016.11.bb | 8 ++--
>> > 14 files changed, 188 insertions(+), 10 deletions(-)
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
>> > create mode 100644
>> recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
>> > create mode 100644 recipes-bsp/u-boot/
>> u-boot-toradex-fw-utils_2016.11.bb
>> >
>> > diff --git a/conf/machine/apalis-imx6.conf
>> b/conf/machine/apalis-imx6.conf
>> > index 47a9d87..a9b9af0 100644
>> > --- a/conf/machine/apalis-imx6.conf
>> > +++ b/conf/machine/apalis-imx6.conf
>> > @@ -20,6 +20,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>> >
>> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
>> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
>> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +
>> > SPL_BINARY = "SPL"
>> > # The SPL configures the DDR RAM depending on the module it runs on.
>> Thus there
>> > # is no need to distingush between the different module types.
>> > diff --git a/conf/machine/colibri-imx6.conf
>> b/conf/machine/colibri-imx6.conf
>> > index d3c2d00..0c6d7cc 100644
>> > --- a/conf/machine/colibri-imx6.conf
>> > +++ b/conf/machine/colibri-imx6.conf
>> > @@ -20,6 +20,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>> >
>> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
>> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
>> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +
>> > SPL_BINARY = "SPL"
>> > UBOOT_CONFIG ??= "spl"
>> > UBOOT_CONFIG[spl] = "colibri_imx6_defconfig,,u-boot.img"
>> > diff --git a/conf/machine/colibri-imx6ull.conf
>> b/conf/machine/colibri-imx6ull.conf
>> > index 748a12b..a70dd42 100644
>> > --- a/conf/machine/colibri-imx6ull.conf
>> > +++ b/conf/machine/colibri-imx6ull.conf
>> > @@ -17,6 +17,9 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>> >
>> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
>> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
>> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +
>> > UBOOT_BINARY = "u-boot-nand.imx"
>> > UBOOT_MAKE_TARGET = "u-boot-nand.imx"
>> > UBOOT_MACHINE ?= "colibri-imx6ull_defconfig"
>> > diff --git a/conf/machine/colibri-imx7.conf
>> b/conf/machine/colibri-imx7.conf
>> > index 51048e4..2ad296b 100644
>> > --- a/conf/machine/colibri-imx7.conf
>> > +++ b/conf/machine/colibri-imx7.conf
>> > @@ -20,6 +20,8 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>> >
>> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
>> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
>> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> >
>> > # U-Boot NAND binary includes 0x400 padding required for NAND boot
>> > UBOOT_BINARY = "u-boot-nand.imx"
>> > diff --git a/conf/machine/colibri-vf.conf b/conf/machine/colibri-vf.conf
>> > index 2f7a5d8..a03853d 100644
>> > --- a/conf/machine/colibri-vf.conf
>> > +++ b/conf/machine/colibri-vf.conf
>> > @@ -20,6 +20,8 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>> >
>> > PREFERRED_PROVIDER_u-boot ?= "u-boot-toradex"
>> > PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-toradex"
>> > +PREFERRED_PROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > +PREFERRED_RPROVIDER_u-boot-fw-utils ?= "u-boot-toradex-fw-utils"
>> > PREFERRED_PROVIDER_virtual/kernel-module-mcc ?=
>> "kernel-module-mcc-toradex"
>> > PREFERRED_PROVIDER_virtual/kernel-module-mcc-dev ?=
>> "kernel-module-mcc-toradex"
>> > PREFERRED_VERSION_mqxboot ?= "1.%"
>> > diff --git
>> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
>> > new file mode 100644
>> > index 0000000..2c087e8
>> > --- /dev/null
>> > +++
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch
>> > @@ -0,0 +1,54 @@
>> > +From 3b0825296aeba69c2cbfd3e179db2e9cbe5e70d7 Mon Sep 17 00:00:00 2001
>> > +From: Masahiro Yamada <yamada.masahiro at socionext.com>
>> > +Date: Mon, 13 Mar 2017 17:43:16 +0900
>> > +Subject: [PATCH] tools: fix cross-compiling tools when HOSTCC is
>> overridden
>> > +
>> > +Upstream-Status: Backport
>> > +
>> > +Richard reported U-Boot tools issues in OpenEmbedded/Yocto project.
>> > +
>> > +OE needs to be able to change the default compiler. If we pass in
>> > +HOSTCC through the make command, it overwrites all HOSTCC instances,
>> > +including ones in tools/Makefile and tools/env/Makefile, which breaks
>> > +"make cross_tools" and "make env", respectively.
>> > +
>> > +Add "override" directives to avoid overriding HOSTCC instances that
>> > +really need to point to the cross-compiler.
>> > +
>> > +Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
>> > +Reported-by: Richard Purdie <richard.purdie at linuxfoundation.org>
>> > +Reviewed-by: Simon Glass <sjg at chromium.org>
>> > +---
>> > + tools/Makefile | 2 +-
>> > + tools/env/Makefile | 2 +-
>> > + 2 files changed, 2 insertions(+), 2 deletions(-)
>> > +
>> > +diff --git a/tools/Makefile b/tools/Makefile
>> > +index 1c840d7..a894b5c 100644
>> > +--- a/tools/Makefile
>> > ++++ b/tools/Makefile
>> > +@@ -262,7 +262,7 @@ $(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
>> > + subdir- += env
>> > +
>> > + ifneq ($(CROSS_BUILD_TOOLS),)
>> > +-HOSTCC = $(CC)
>> > ++override HOSTCC = $(CC)
>> > +
>> > + quiet_cmd_crosstools_strip = STRIP $^
>> > + cmd_crosstools_strip = $(STRIP) $^; touch $@
>> > +diff --git a/tools/env/Makefile b/tools/env/Makefile
>> > +index 38ad118..95b28c0 100644
>> > +--- a/tools/env/Makefile
>> > ++++ b/tools/env/Makefile
>> > +@@ -8,7 +8,7 @@
>> > + # fw_printenv is supposed to run on the target system, which means it
>> should be
>> > + # built with cross tools. Although it may look weird, we only replace
>> "HOSTCC"
>> > + # with "CC" here for the maximum code reuse of scripts/Makefile.host.
>> > +-HOSTCC = $(CC)
>> > ++override HOSTCC = $(CC)
>> > +
>> > + # Compile for a hosted environment on the target
>> > + HOST_EXTRACFLAGS = $(patsubst -I%,-idirafter%, $(filter -I%,
>> $(UBOOTINCLUDE))) \
>> > +--
>> > +2.7.4
>> > +
>> > diff --git
>> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
>> > new file mode 100644
>> > index 0000000..30b8b90
>> > --- /dev/null
>> > +++
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx6ull/fw_env.config
>> > @@ -0,0 +1,11 @@
>> > +# Configuration file for fw_(printenv/setenv) utility.
>> > +# Up to two entries are valid, in this case the redundant
>> > +# environment sector is assumed present.
>> > +# Notice, that the "Number of sectors" is not required on NOR and
>> SPI-dataflash.
>> > +# Futhermore, if the Flash sector size is ommitted, this value is
>> assumed to
>> > +# be the same as the Environment size, which is valid for NOR and
>> SPI-dataflash
>> > +
>> > +# MTD device name Device offset Env. size Flash sector
>> size Number of sectors
>> > +# Colibri iMX7
>>
>> Max:
>> You copied this typo from meta-toradex-nxp, could we change this to
>> Colibri iMX6ULL here?
>>
>> > +/dev/mtd3 0x00000000 0x00020000 0x20000
>> 4
>> > +
>> > diff --git
>> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
>> > new file mode 100644
>> > index 0000000..30b8b90
>> > --- /dev/null
>> > +++
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/colibri-imx7/fw_env.config
>> > @@ -0,0 +1,11 @@
>> > +# Configuration file for fw_(printenv/setenv) utility.
>> > +# Up to two entries are valid, in this case the redundant
>> > +# environment sector is assumed present.
>> > +# Notice, that the "Number of sectors" is not required on NOR and
>> SPI-dataflash.
>> > +# Futhermore, if the Flash sector size is ommitted, this value is
>> assumed to
>> > +# be the same as the Environment size, which is valid for NOR and
>> SPI-dataflash
>> > +
>> > +# MTD device name Device offset Env. size Flash sector
>> size Number of sectors
>> > +# Colibri iMX7
>> > +/dev/mtd3 0x00000000 0x00020000 0x20000
>> 4
>> > +
>> > diff --git a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
>> > new file mode 100644
>> > index 0000000..e054ccb
>> > --- /dev/null
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/fw_env.config
>> > @@ -0,0 +1,22 @@
>> > +# Configuration file for fw_(printenv/setenv) utility.
>> > +# Up to two entries are valid, in this case the redundant
>> > +# environment sector is assumed present.
>> > +# Notice, that the "Number of sectors" is not required on NOR and
>> SPI-dataflash.
>> > +# Futhermore, if the Flash sector size is ommitted, this value is
>> assumed to
>> > +# be the same as the Environment size, which is valid for NOR and
>> SPI-dataflash
>> > +
>> > +# NOR example
>> > +# MTD device name Device offset Env. size Flash sector
>> size Number of sectors
>> > +#/dev/mtd1 0x0000 0x4000 0x4000
>> > +#/dev/mtd2 0x0000 0x4000 0x4000
>> > +
>> > +# MTD SPI-dataflash example
>> > +# MTD device name Device offset Env. size Flash sector
>> size Number of sectors
>> > +#/dev/mtd5 0x4200 0x4200
>> > +#/dev/mtd6 0x4200 0x4200
>> > +
>> > +# NAND example
>> > +#/dev/mtd0 0x4000 0x4000 0x20000
>> 2
>> > +
>> > +# Block device example
>> > +#/dev/mmcblk0 0xc0000 0x20000
>> > diff --git
>> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
>> > new file mode 100644
>> > index 0000000..731d874
>> > --- /dev/null
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/mx6/fw_env.config
>> > @@ -0,0 +1,15 @@
>> > +# Configuration file for fw_(printenv/setenv) utility.
>> > +# Up to two entries are valid, in this case the redundant
>> > +# environment sector is assumed present.
>> > +# Device offset must be prefixed with 0x to be parsed as a hexadecimal
>> value.
>> > +# On a block device a negative offset is treated as a backwards offset
>> from the
>> > +# end of the device/partition, rather than a forwards offset from the
>> start.
>> > +
>> > +# Colibri iMX6/Apalis iMX6
>> > +# U-Boot environment is stored at the end of the first eMMC boot
>> partition
>> > +# hence use a negative value. The environment is just in front of the
>> config
>> > +# block which occupies the last sector (hence -0x200)
>>
>> Max:
>> Could we provide a comment here that /dev/mmcblk0boot0 by default is read
>> only?
>> E.g.:
>> # Note that /dev/mmcblk0boot0 by default is read only
>> # To use fw_setenv you have to first make it writeable, on the cmdline
>> e.g. by
>> # $ echo 0 > /sys/block/mmcblk0boot0/force_ro
>>
>> > +
>> > +# Block device name Device offset Env. size
>> > +/dev/mmcblk0boot0 -0x2200 0x2000
>> > +
>> > diff --git
>> a/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
>> > new file mode 100644
>> > index 0000000..c1581ea
>> > --- /dev/null
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils/vf/fw_env.config
>> > @@ -0,0 +1,11 @@
>> > +# Configuration file for fw_(printenv/setenv) utility.
>> > +# Up to two entries are valid, in this case the redundant
>> > +# environment sector is assumed present.
>> > +# Notice, that the "Number of sectors" is not required on NOR and
>> SPI-dataflash.
>> > +# Futhermore, if the Flash sector size is ommitted, this value is
>> assumed to
>> > +# be the same as the Environment size, which is valid for NOR and
>> SPI-dataflash
>> > +
>> > +# MTD device name Device offset Env. size Flash sector
>> size Number of sectors
>> > +# Colibri VF61
>> > +/dev/mtd2 0x00000000 0x00020000 0x20000
>> 4
>> > +
>> > diff --git a/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
>> b/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
>> > new file mode 100644
>> > index 0000000..1ed37fc
>> > --- /dev/null
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex-fw-utils_2016.11.bb
>> > @@ -0,0 +1,42 @@
>> > +require recipes-bsp/u-boot/u-boot-toradex.inc
>> >
>> > > +
>> > +SUMMARY = "U-Boot bootloader fw_printenv/setenv utilities"
>> > +
>> > +SRC_URI +=
>> "file://0001-tools-fix-cross-compiling-tools-when-HOSTCC-is-overr.patch \
>> > + file://fw_env.config \
>> > +"
>> > +
>> > +DEPENDS += "mtd-utils"
>> > +
>> > +INSANE_SKIP_${PN} = "already-stripped"
>> > +EXTRA_OEMAKE_class-target = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${CC}
>> ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"
>> V=1'
>> > +EXTRA_OEMAKE_class-cross = 'ARCH=${TARGET_ARCH} CC="${CC} ${CFLAGS}
>> ${LDFLAGS}" V=1'
>> > +
>> > +inherit uboot-config
>> > +
>> > +do_compile () {
>> > + oe_runmake ${UBOOT_MACHINE}
>> > + oe_runmake env
>> > +}
>> > +
>> > +do_install () {
>> > + install -d ${D}${base_sbindir}
>> > + install -d ${D}${sysconfdir}
>> > + install -m 755 ${S}/tools/env/fw_printenv
>> ${D}${base_sbindir}/fw_printenv
>> > + install -m 755 ${S}/tools/env/fw_printenv
>> ${D}${base_sbindir}/fw_setenv
>> > + install -m 0644 ${WORKDIR}/fw_env.config
>> ${D}${sysconfdir}/fw_env.config
>> > +}
>> > +
>> > +do_install_class-cross () {
>> > + install -d ${D}${bindir_cross}
>> > + install -m 755 ${S}/tools/env/fw_printenv
>> ${D}${bindir_cross}/fw_printenv
>> > + install -m 755 ${S}/tools/env/fw_printenv
>> ${D}${bindir_cross}/fw_setenv
>> > +}
>> > +
>> > +SYSROOT_DIRS_append_class-cross = " ${bindir_cross}"
>> > +
>> > +PROVIDES += "u-boot-fw-utils"
>> > +RPROVIDES_${PN} += "u-boot-fw-utils"
>> > +
>> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
>> > +BBCLASSEXTEND = "cross"
>> > diff --git a/recipes-bsp/u-boot/u-boot-toradex.inc
>> b/recipes-bsp/u-boot/u-boot-toradex.inc
>> > index 67e9976..a67b469 100644
>> > --- a/recipes-bsp/u-boot/u-boot-toradex.inc
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex.inc
>>
>> Max:
>> I think we should rename this include file to u-boot-toradex_2016.11.inc
>> as this
>> include file now pulls and sets the version of the sources.
>> Of course with a follow up in the two *bb files using the inc file.
>>
>> > @@ -2,20 +2,17 @@
>> > # Based on u-boot-fslc.inc Copyright (C) 2012-2014 O.S. Systems
>> Software LTDA
>> > # Released under the MIT license (see COPYING.MIT for the terms)
>> >
>> > -require recipes-bsp/u-boot/u-boot.inc
>> > -
>> > -inherit fsl-u-boot-localversion
>> > -
>> > SUMMARY = "U-Boot bootloader with support for Toradex Computer on
>> Modules"
>> > LICENSE = "GPLv2+"
>> > LIC_FILES_CHKSUM =
>> "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
>> >
>> > -PROVIDES += "u-boot"
>> > -
>> > SRC_URI = "git://
>> git.toradex.com/u-boot-toradex.git;branch=${SRCBRANCH}
>> <http://git.toradex.com/u-boot-toradex.git;branch=$%7BSRCBRANCH%7D>"
>> >
>> > +SRCREV ?= "aca804c9ddadbf34a8ff82779e5598ec5e319f23"
>> > +SRCBRANCH ?= "2016.11-toradex"
>> > +
>> > S = "${WORKDIR}/git"
>> >
>> > -inherit dtc-145
>> > +PV = "v2016.11+git${SRCPV}"
>> >
>> > PACKAGE_ARCH = "${MACHINE_ARCH}"
>> > diff --git a/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
>> b/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
>> > index f54eeaa..2c82daf 100644
>> > --- a/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
>> > +++ b/recipes-bsp/u-boot/u-boot-toradex_2016.11.bb
>> > @@ -1,8 +1,10 @@
>> > +require recipes-bsp/u-boot/u-boot.inc
>> > require recipes-bsp/u-boot/u-boot-toradex.inc
>> >
>> > LOCALVERSION = "-2.8.3"
>> > -PV_append = "+git${SRCPV}"
>> >
>> > -SRCREV = "aca804c9ddadbf34a8ff82779e5598ec5e319f23"
>> > -SRCBRANCH = "2016.11-toradex"
>> > +PROVIDES += "u-boot"
>> > +
>> > +inherit fsl-u-boot-localversion dtc-145
>> > +
>> > COMPATIBLE_MACHINE = "(mx6|mx7|vf|use-mainline-bsp)"
>>
>> Max:
>> I think COMPATIBLE_MACHINE should be also set for the fw-utils, thus I
>> would move
>> this to the *.inc file.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20181119/69db270f/attachment.html>
More information about the meta-freescale
mailing list