[meta-freescale] [3rdparty][PATCH 5/5] ccimx6ulsbcexpress: Add initial board configuration

[Alex Gonzalez]

The ConnectCore 6UL Single Board Computer (SBC) Express contains the
ConnectCore 6UL System-On-Module.

Its hardware specifications are:

* 256MB DDR3 memory
* 256MB NAND flash
* Single Ethernet
* USB Host and USB-OTG
* MicroSD external storage
* Groove connectors and Raspberry Pi Hat compatible expansion heade

The build artifacts are:

U-Boot images: u-boot.imx
Linux partition image: <image name>.boot.ubifs
Root filesystem image: <image name>.ubifs

Root filesystem tarball (for network booting): <image name>.tar.bz2

To program a board from the U-boot prompt, copy the U-Boot, Linux and
root filesystem partition images to your TFTP server root and do:

env set ipaddr <target ip address>
env set serverip <TFTP server ip address>
update uboot tftp u-boot.imx
update linux tftp <image name>.boot.ubifs
update rootfs tftp <image name>.ubifs

More details about the SBC can be found at:
https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-express

Signed-off-by: Alex Gonzalez <alex.gonzalez at digi.com>
---
 conf/machine/ccimx6ulsbcexpress.conf | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 conf/machine/ccimx6ulsbcexpress.conf

diff --git a/conf/machine/ccimx6ulsbcexpress.conf b/conf/machine/ccimx6ulsbcexpress.conf
new file mode 100644
index 000000000000..a29dcea28893
--- /dev/null
+++ b/conf/machine/ccimx6ulsbcexpress.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: ConnecCore 6UL SBC Express
+#@SOC: i.MX6UL
+#@DESCRIPTION: Machine configuration for ConnectCore 6UL SBC Express board.
+#@MAINTAINER: Alex Gonzalez <alex.gonzalez at digi.com>
+
+include conf/machine/include/ccimx6ul.inc
+
+SERIAL_CONSOLE = "115200 ttymxc4"
+
+KERNEL_DEVICETREE = "imx6ul-ccimx6ulsbcexpress.dtb"