[meta-freescale] [3rdparty][PATCH] linux-boundary: Bump revision to ec2dce537de6

Thu May 24 05:27:19 PDT 2018

This includes the following commits:

    - ec2dce537de6 squash with mxc_lcdif: add panel GCX119, flip pixel clk polarity
    - 5ad2555dc318 squash with mxc_lcdif: add panel GCX119, fix compile error
    - f13fdb21bc77 mxc_lcdif: add panel GCX119
    - 7118fd327e66 max77823: clear IRQ_NOREQUEST, so that irq can be requested
    - 5deb6c913288 max77823_fuelgauge: fix long delay on probe failure
    - 478d5d84aa63 usb: chipidea: core: fix don't defer probe for regulator
    - a5a041125b24 ARM: dts: imx6sx-nitrogen6sx: use generic name for sgtl5000 codec
    - b1c2a65d8f1e ARM: dts: imx6qdl-nitrogen6_som2: use generic name for sgtl5000 codec
    - c6617ea72423 ARM: dts: imx6qdl-nitrogen6_max: use generic name for sgtl5000 codec
    - b3011df0e763 ARM: dts: imx6qdl-nit6xlite: use generic name for sgtl5000 codec
    - c0195d6b8966 ARM: dts: imx6qdl-nitrogen6x: use generic name for sgtl5000 codec
    - 0c599d8cff6b ARM: dts: imx6qdl-sabrelite: use generic name for sgtl5000 codec
    - 49630608393c ov5640_mipi: call mipi_csi2_disable when camera is powered down
    - 70593cb95a6a ov5640_mipi: reduce stable delay to 2 frames only
    - 9c34a293673c ov5640_mipi: only call standby function when needed
    - 3a1734f20218 imx6dl.dtsi: use IMX6QDL_CLK_MIPI_CORE_CFG instead of IMX6QDL_CLK_HSI_TX for mipi_dsi
    - 4ea0a25daa24 imx6q.dtsi: use IMX6QDL_CLK_MIPI_CORE_CFG instead of IMX6QDL_CLK_HSI_TX for mipi_dsi
    - 6d6d1cd39aaa clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
    - e4416415c16a ARM: imx6q: clk: re-add IMX6QDL_CLK_MIPI_CORE_CFG
    - 0420f1e79b6e crypto: caam: secvio: add external pin tamper custom control
    - 6ba8ab181a5c mipi_dsi: reorder as AN5305 says
    - 726aac948b49 mipi_dsi: assert testclr as AN5305 says
    - 665a21bfd34c mipi_dsi: set DSI_PHY_IF_CTRL_TX_REQ_CLK_HS to match RM
    - bc190b4567c9 mipi_dsi: return error code for mipi_dsi_dphy_init
    - 8e7c6adc6e9d mipi_dsi: DSI_PHY_IF_CTRL_RESET done in mipi_dsi_disable_controller, no need to do again
    - b1c9f27dc0f0 mipi_dsi: reorder to match RM
    - 063f11500d47 mipi_dsi: remove unneeded parameters from mipi_dsi_dphy_init
    - b63610e411e9 mipi_dsi: retry on mipi_dsi_dphy_init failure
    - 6d5677c7e702 mipi_dsi: use mipi_dsi_disable_controller instead of copying code
    - 26ded0b231be mipi_dsi: move mipi_dsi_disable_controller earlier in code
    - e13ecb3253f2 mipi_dsi: make mipi_dsi_enable_controller return success/failure
    - 21ccc5de7fa7 mipi_dsi: move code to subroutine mipi_dsi_controller_init
    - 0d7888f03245 mipi_dsi: add calculation comments to mipi_dsi_phy_pll_clk_table
    - 3a40cc40a5f4 mxc: mipi_dsi: move regulator and reset control to power_on function
    - 64302d7eb28f ov5640_mipi: allow regulators to actually power down
    - ec48e09b25e4 imx6qdl.dtsi: disable fsl,imx6q-caam-secvio as default
    - 1641ff702069 wm8960: ensure 600 ms delay before powering up, not after powering down
    - 22bcf837784f Input: silead - switch to request_firmware_nowait()
    - 945291a1adb1 ov5640_mipi: fix auto-focus init sequence
    - 34ea338b5d74 ov5640_mipi: fix reset sequence to match manual
    - b1c3cb66285b ov5642: add focus area selection support
    - 36608b15d329 ov5642: improve autofocus support
    - ad922f9a2932 ov5640_mipi: add focus area selection support
    - 91333e8c005f ov5640_mipi: add colorfx support at sensor level
    - 3bb6876832e3 ov5640_mipi: add custom white balance control support
    - f9335c5f3eab ov5640_mipi: add auto white balance control support
    - d0aafbf99bda ov5640_mipi: add saturation support at sensor level
    - fac03fdc96c6 ov5640_mipi: add contrast support at sensor level
    - 5b82651f9e82 ov5640_mipi: add brightness support at sensor level
    - fe5ca07bc989 ov5640_mipi: improve autofocus support
    - 95df18673fef ov5640_mipi: defer probe if clock isn't ready
    - e6381faa612a mxc_v4l2_capture: add generic support for missing ioctl
    - 7a88e185e26f mxc_v4l2_capture: improve ioctl error log
    - dfc5973ce048 mxc_v4l2_capture: populate card and bus info when available
    - 1b9485bfdd08 usbmisc_imx: turn off check_contact before exiting imx6_charger_data_contact_detect upon error
    - 70407f1670b5 usbmisc_imx: set as dedicated charger when D+/D- not connected
    - 7fc4270403e8 usb: chipidea: ci_hdrc_imx: add dedicate-charging-port-mA and other devicetree properties
    - 1604a260a934 usb: chipidea: core: don't defer probe for regulator
    - bc9af478422c imx6q-cid2.dts: add for new rev of board
    - a638c110e1a2 imx6qdl-cid.dtsi: GP_LED_GREEN is active low, rename #defines
    - b1dba659f138 ARM: dts: imx6qdl-cid: remove NFC/FP USB regulator
    - 69d59ee176c3 imx6qdl-cid.dtsi: update input_current_limit for USB_DCP
    - 5dc4dcf5db2d imx6qdl-cid.dtsi: set dedicate-charging-port-mA
    - 2054952a77bc ARM: dts: imx6qdl-cid_tab: fix wwan rfkil pulse time
    - 9d07c2b9e25f ARM: dts: imx6qdl-cid: fix wwan rfkill pulse time
    - 11bb03b3cc9d imx6qdl-cid.dtsi: add initially-in-reset to mipi_dsi_reset
    - e94baab3645c imx6qdl-cid.dtsi: enable tamper gpio
    - 09260c7dd5c0 ARM: dts: imx6qdl-cid_tab: add external tamper gpio to secvio
    - 51c4589dd8a3 imx6qdl-cid.dtsi: reverse polarity of red/green/blue leds, add vbus-supply for usbh1
    - 2a3ea414d3d1 max77823_charger: allow booting without a battery if 3.2 Amp charger used
    - bd7fe4644f5b max77823_charger: add restart-threshold-mv
    - 490f89ca77f3 max77823_charger: fix charger type
    - ccb64fcca98e sec_battery: usb/online: check charger_health
    - 1c1f85e517f5 sec_battery: rearrange sec_usb_get_property to set default 1st
    - f9815491249a max77823_charger: have a USB charger board(like cid) default to POWER_SUPPLY_TYPE_USB
    - 3c688cce9af9 max77823_charger: add function update_cable_type
    - a669c6224442 battery: sec_board-mxc: #if 0 sec_bat_check_cable_result_callback
    - 5bf9e6112349 max77823_charger: verify chgin_ilim setting does not cause vbus to be invalid
    - b52625644391 max77823_charger: turn on charger at shutdown
    - ac1f2ca6a8af imx6qdl-neol.dtsi: add no-sd-uhs-sdr104 to reduce silex emissions
    - 25d85b8eb7cd ipu_common: add disable_di_causes_reset for i.mx51
    - f3b7ba2a5139 cdc-ether: add IDs for Sierra HL8548 / HL8548-G
    - b90e8b163d90 imx6qdl-nitrogen6_max.dtsi: ensure rtc-snvs is rtc1
    - bf20a1f39343 imx6qdl-nitrogen6x.dtsi: ensure rtc-snvs is rtc1
    - cc13309aa55b imx51-nitrogen51_e.dts: initial addition
    - 4c5779d6428e imx6qdl-mtp.dtsi: exclude sdr104 so that ddr50 will be chosen
    - c445d0ef93b7 imx6sx-ys.dts: enable the 3 port usb hub by enabling otg2_vbus power
    - 653d71c2faff imx6sx-ys.dts: set LVE bit for USDHC3, and disable pullup on USDHC3 reset
    - 409f02f31bee mmc: core: Enable tuning according to the actual timing
    - e5c4e5972663 mmc: core: enable CMD19 tuning for DDR50 mode
    - 695a9122a89c mmc: sd: limit SD card power limit according to cards capabilities
    - 2a37300b9f44 imx6qdl-ta.dtsi: remove unrouted MX6QDL_PAD_NANDF_CS1__SD3_VSELECT
    - 5ce267ccc022 imx6qdl-rc.dtsi: remove MX6QDL_PAD_NANDF_CS1__SD3_VSELECT, it is WL_IRQ
    - dcefcc6a437e imx6qdl-acl.dtsi: remove unrouted MX6QDL_PAD_NANDF_CS1__SD3_VSELECT
    - 60eea8a5d573 sdhci: help 1.8v failure recovery
    - d5240bcb443e mtd: spi-nor: Add support for gd25q16
    - c857b6e65a35 mtd: spi-nor: support dual, quad, and WP for Gigadevice
    - 6b0631e8125a mtd: spi-nor: support GigaDevice gd25lq64c
    - 08796846936c sdhci: add no-sd-uhs-sdr104 devicetree property
    - a4005398894c ARM: dts: imx6qdl-cid: move ov5640 to csi1
    - 204e6d9e45d4 imx7d-nitrogen7.dts: add I2C recovery
    - af6f6506dfa9 imx6sx-ys.dts: add I2C recovery
    - 17952bf49ea8 imx6sx-nitrogen6sx.dts: add I2C recovery
    - 0d317e5190ba imx6sx-nitrogen6_scm.dts: add I2C recovery
    - 90fe31164fb9 imx6qdl-vp.dtsi: add I2C recovery
    - 14a610ae6f78 imx6qdl-utc.dtsi: add I2C recovery
    - ba3f6556eae3 imx6qdl-usd_mr2.dtsi: add I2C recovery
    - 942aaf11d3a8 imx6qdl-usd.dtsi: add I2C recovery
    - eb820e8a359d imx6qdl-ta.dtsi: add I2C recovery
    - e0ef159cece3 imx6qdl-sp.dtsi: add I2C recovery
    - a7f15736f9f4 imx6qdl-snap.dtsi: add I2C recovery
    - 99a9a75b2329 imx6qdl-sabrelite.dtsi: add I2C recovery
    - a7a18415a615 imx6qdl-s.dtsi: add I2C recovery
    - 11a08cb34ab5 imx6qdl-rc.dtsi: add I2C recovery
    - 4ee2f517e6e2 imx6qdl-per.dtsi: add I2C recovery
    - 792f4782db76 imx6qdl-nw2.dtsi: add I2C recovery
    - 641f6891856e imx6qdl-nitrogen6x.dtsi: add I2C recovery
    - 028fdea51e86 imx6qdl-nitrogen6_vm.dtsi: add I2C recovery
    - c8a7010dc231 imx6qdl-nitrogen6_som2.dtsi: add I2C recovery
    - 47fdf6fb4869 imx6qdl-nitrogen6_max.dtsi: add I2C recovery
    - ba7fc015a467 imx6qdl-nit6xlite.dtsi: add I2C recovery
    - e7e261afbd50 imx6qdl-neol.dtsi: add I2C recovery
    - 8c1e7d767c6d imx6qdl-mtp.dtsi: add I2C recovery
    - 68ada608eefc imx6qdl-mcs.dtsi: add I2C recovery
    - 74c21cea07a9 imx6qdl-lshore.dtsi: add I2C recovery
    - 74c21cea07a9 imx6qdl-lshore.dtsi: add I2C recovery
    - cc225748ea7b imx6qdl-ls.dtsi: add I2C recovery
    - ea11db859924 imx6qdl-jlm.dtsi: add I2C recovery
    - 9a85e7e0f972 imx6qdl-ioc.dtsi: add I2C recovery
    - 93bd62e81b2a imx6qdl-insp.dtsi: add I2C recovery
    - 71fc9ccb73cf imx6qdl-hp.dtsi: add I2C recovery
    - bdae379f77bf imx6qdl-hl.dtsi: add I2C recovery
    - 600a24bd2afe imx6qdl-h4.dtsi: add I2C recovery
    - 5846369245e7 imx6qdl-eo.dtsi: add I2C recovery
    - e2bab618ec9c imx6qdl-cob2.dtsi: add I2C recovery
    - 8d9fbf509865 imx6qdl-cob.dtsi: add I2C recovery
    - 0958f7725cd5 imx6qdl-cnt.dtsi: add I2C recovery
    - 0f5f63fda65c imx6qdl-cid_tab.dtsi: add I2C recovery
    - 71ebfed0f0d1 imx6qdl-cid.dtsi: add I2C recovery
    - c6881999555b imx6qdl-bt2.dtsi: add I2C recovery
    - b116752fc69e imx6qdl-bt.dtsi: add I2C recovery
    - 7f3d08398a62 imx6qdl-ash2.dtsi: add I2C recovery
    - 96fb3345ad4b imx6qdl-ash.dtsi: add I2C recovery
    - f0e59b79af9c imx6qdl-ap.dtsi: add I2C recovery
    - 69ddd76ec0c1 imx6qdl-acl.dtsi: add I2C recovery
    - 673aaef58d1f imx6qdl-a.dtsi: add I2C recovery
    - 694c9b05b423 imx7d-nitrogen7.dts: move pinctrl to top of file
    - 3c06e353125d i2c: imx: Use correct function to write to register
    - fa71f983679f i2c: busses: constify i2c_algorithm structures
    - b9dc9b95ecb2 i2c: imx: defer probe if bus recovery GPIOs are not ready
    - 97dc84d9b77a i2c: imx: make bus recovery through pinctrl optional
    - e2dcd8af7677 i2c: don't print error when adding adapter fails
    - e6ad88f43210 i2c: imx: reduce load by using usleep_range instead of udelay
    - 3cbbc236725a i2c: imx: remove extra spaces.
    - e02217888bf0 i2c: imx: Remove unneeded comments
    - 87c27b55caa5 i2c: imx: improve code readability
    - 6c5235546b8c i2c: imx: Improve message log when DMA is not used
    - 820ac81433b7 i2c: imx: add runtime pm support to improve the performance
    - 907658f66ec5 i2c: imx: init bus recovery info before adding i2c adapter
    - 38a94d0b2b0a i2c: imx: fix a compiling error
    - 8493f476d7c6 i2c: imx: Use -ENXIO as error in the NACK case
    - 0ff82af79beb i2c: imx: implement bus recovery
    - 939d4f242627 i2c: constify platform_device_id
    - 985c1365fb6a ARM: dts: imx6qdl-cid_tab: fix mpu9250 axes
    - 3eec5128eb0a tty: serial: imx: add support for TIOCM_RTS/TIOCM_LOOP in imx_get_hwmctrl
    - e53b834241b4 tty: serial: imx: move clear_rx_errors to match 4.9, and avoid forward declaration
    - 9490725a9674 tty: serial: imx: ageing interrupt not enabled if using dma
    - a102bb91f605 MLK-10274 tty: serial: clear AWAKE bit after resume back
    - 0e4bea6ead49 tty: serial: imx: add comment about RTS/CTS
    - e97612ba58c4 MLK-14700 tty: serial: imx: only enable RTSDEN if have_rtscts
    - 1c4b65a51a50 MLK-14498-8 tty: serial: imx: add modem device reset
    - 61ed33eaf56a serial: imx: Fix DCD reading
    - caf2b2510b56 serial: imx: add error messages when .probe fails
    - 3f9769d4bce8 Allowing UART DMA to be configured on i.MX53
    - 3d8c8da43591 tty: serial: constify uart_ops structures
    - 9e53ffe213d9 serial: imx: Use generic uart-has-rtscts DT property
    - 997849ef5179 serial: imx: implement DSR irq handling for DTE mode
    - 523050f2af4d serial: imx: reorder functions to simplify next patch
    - 94d66fede20c serial: imx: only count 0->1 transitions for RNG
    - 4561e81c0eda serial: imx: make sure unhandled irqs are disabled
    - baa3fab2f121 serial: imx: let irq handler return IRQ_NONE if no event was handled
    - ec6d4b09d771 serial: imx: fix polarity of RI
    - 0e0277d50c10 serial: imx: support RS-485 Rx disable on Tx
    - 04759a752d17 serial: imx: implement handshaking using gpios with the mctrl_gpio helper
    - 424c605b44df serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
    - 7b38acb3332f serial: mctrl_gpio: add modem control read routine
    - d6f2e184d452 serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
    - ce79feeec200 serial: mctrl_gpio: add IRQ locking
    - ce79feeec200 serial: mctrl_gpio: add IRQ locking
    - ef97f3669a99 serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
    - 1d35a78744c9 serial: mctrl_gpio: Add missing module license
    - 1167b22bda09 serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init
    - 70d6fe4d728f serial: fix mctrl helper functions
    - 79954fbc2f0b serial: mctrl_gpio: implement interrupt handling
    - 37662363bdd1 serial: mctrl-gpio: rename init function
    - 7ca214748790 serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL
    - be8db6a885dd serial: imx: reorder functions and simplify a bit
    - 7372ee0ab46b serial: imx: repair and complete handshaking
    - e11fe3e09d5d serial: imx: fix a possible NULL dereference
    - 92ea478d7805 of: add helper function to retrive match data
    - 187bca0ca41f serial: imx: add earlycon support
    - f11ba809e242 serial: imx: allow waking up on RTSD
    - ceda539cf0c0 serial: imx: introduce serial_imx_enable_wakeup()
    - 49207895c05f Serial: imx: add dev_pm_ops to support suspend to ram/disk
    - 62ee7132f4a6 tty: serial: imx: s/gpios_mask/act_gpios_mask/ s/gpios/act_gpios/
    - e36285193350 imx6sx-nitrogen6sx.dts: use internal LDO for SGTL5000 VDDD because R97 is NS

Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
---
 recipes-kernel/linux/linux-boundary_4.1.15.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/recipes-kernel/linux/linux-boundary_4.1.15.bb b/recipes-kernel/linux/linux-boundary_4.1.15.bb
index 55e8715..82b734e 100644
--- a/recipes-kernel/linux/linux-boundary_4.1.15.bb
+++ b/recipes-kernel/linux/linux-boundary_4.1.15.bb
@@ -11,6 +11,6 @@ SRC_URI = "git://github.com/boundarydevices/linux-imx6.git;branch=${SRCBRANCH} \
 
 LOCALVERSION = "-2.0.0-ga+yocto"
 SRCBRANCH = "boundary-imx_4.1.15_2.0.0_ga"
-SRCREV = "719fb24c9923e424d25d1828cdd0c86f11ccb147"
+SRCREV = "ec2dce537de6c06f6ce0b6526c842d41d083721b"
 DEPENDS += "lzop-native bc-native"
 COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite|nitrogen6sx|nitrogen7)"
-- 
2.14.2

