[meta-freescale] [PATCH 4/6] ls2088ardb-be: add machine config

[Chunrong Guo]

Signed-off-by: Chunrong Guo <chunrong.guo at nxp.com>
---
 conf/machine/ls2088ardb-be.conf | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 conf/machine/ls2088ardb-be.conf

diff --git a/conf/machine/ls2088ardb-be.conf b/conf/machine/ls2088ardb-be.conf
new file mode 100644
index 0000000..f210d5c
--- /dev/null
+++ b/conf/machine/ls2088ardb-be.conf
@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: NXP LS2088ARDB
+#@SOC: LSCH3
+#@DESCRIPTION: Machine configuration for running LS2088ARDB in 64-bit mode
+#@MAINTAINER: Zongchun Yu <Zongchun.Yu at nxp.com>
+
+require conf/machine/include/qoriq-arm64.inc
+require conf/machine/include/arm/arch-arm64.inc
+
+DEFAULTTUNE = "aarch64_be"
+
+LE_UBOOT_FOR_ARMBE_TARGET = "1"
+
+MACHINEOVERRIDES =. "fsl-lsch3:ls2088a:"
+
+KERNEL_CLASSES  = " kernel-itbimage "
+KERNEL_IMAGETYPES = "itbImage"
+
+DTB_LOAD = "0x90000000"
+UBOOT_ENTRYPOINT = "0x80080000"
+
+UBOOT_CONFIG ??= "qspi-secure-boot qspi nand nor"
+UBOOT_CONFIG[nor] = "ls2080ardb_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[nand] = "ls2080ardb_nand_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi] = "ls2088ardb_qspi_defconfig,,u-boot-dtb.bin"
+UBOOT_CONFIG[qspi-secure-boot] = "ls2088ardb_qspi_SECURE_BOOT_defconfig,,u-boot-dtb.bin"
+
+KERNEL_DEVICETREE ?= "freescale/fsl-ls2088a-rdb.dtb"
+KERNEL_DEFCONFIG ?= "defconfig"
+
+SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyS1 115200;ttyAMA0"
+SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
+
+EXTRA_IMAGEDEPENDS += "mc-utils ls2-phy rcw-bin management-complex ppa"
+USE_VT = "0"
-- 
1.9.0