[meta-freescale] Kernel panic - not syncing: Requested init /linuxrc failed (error -2)

[Otavio Salvador]

On Tue, Mar 20, 2018 at 6:20 AM, vlad zouth <vladzouth at gmail.com> wrote:
> I build an embedded linux with YOCTO for the KARO TX6S-8035 target. I use
> the fsl yocto project given by KARO.
> I use the Mfgtools-TX6-2018-01 tool to flash images into the board but when
> i boot the device i have the following error:
> Kernel panic - not syncing: Requested init /linuxrc failed (error -2).
> How can i fix this?
>
> Here is the result of printenv from U-BOOT: printenv
> And the serial output from the board: serial output

I am sorry but as you are using their fork, please contact their support.


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750