[meta-freescale] [3rdparty][PATCH v2] imx7d-pico: Add machine configuration

[Vanessa Maegima]

Hi Philippe,

On Qua, 2017-09-27 at 20:57 -0300, Otavio Salvador wrote:
> Hello Philippe,
> 
> On Wed, Sep 27, 2017 at 8:29 PM, Philippe Desrochers
> <desrochers.philippe at gmail.com> wrote:
> > 
> > Does anybody know if the Wifi module is enable with this
> > configuration for
> > the PICO-PI-IMX7 ?
> I don't know; but it is likely.
> 

Wifi is not enabled in this configuration yet. It uses kernel 4.13 and
the Wifi module is enabled in kernel 4.14. You can try to update the
kernel and add the firmware files yourself.

I didn't add the firmware in this configuration because I was facing
some issues trying to get Wifi working in this board. I'm still trying
to debug this. If you could make it functional please let us know.

> > 
> > How can I write the built image (kernel/rootfs) to the eMMC ?
> > Do I have to use the NXP manufacturing tool from here:
> > https://www.nxp.com/products/microcontrollers-and-processors/arm-ba
> > sed-processors-and-mcus/i.mx-applications-processors/developer-
> > resources/iot-development-platforms-based-on-i.mx-6ul-7dual-
> > processor-and-android-things-os:IOT-DEV-PLATFORMS-
> > i.MX6UL?tab=Design_Tools_Tab
> You can use U-Boot ums or gzwrite for it.
> 

Best,
Vanessa