[meta-freescale] [PATCH 27/29] ls1046ardb: add default environment variable for build secureboot

[Chunrong Guo]

From: Chunrong Guo <chunrong.guo at nxp.com>

Signed-off-by: Chunrong Guo <chunrong.guo at nxp.com>
---
 conf/machine/ls1046ardb.conf | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/conf/machine/ls1046ardb.conf b/conf/machine/ls1046ardb.conf
index b069f97..6856d46 100644
--- a/conf/machine/ls1046ardb.conf
+++ b/conf/machine/ls1046ardb.conf
@@ -21,6 +21,39 @@ UBOOT_CONFIG[qspi] = "ls1046ardb_qspi_config,,u-boot-dtb.bin"
 UBOOT_CONFIG[qspi-secure-boot] = "ls1046ardb_qspi_SECURE_BOOT_config,,u-boot-dtb.bin"
 UBOOT_CONFIG[sdcard-secure-boot] = "ls1046ardb_sdcard_SECURE_BOOT_defconfig,,u-boot-with-spl-pbl.bin"
 
+UBOOT_SECURE_ENABLE = "1"
+ENCAP = "1"
+RCW_QSPI_NOSWAP = "rcw/ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin"
+RCW_QSPI = "rcw/ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin.swap"
+RCW_QSPI_SEC_NOSWAP = "rcw/ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1600_qspiboot_sben.bin"
+RCW_QSPI_SEC = "rcw/ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1600_qspiboot_sben.bin.swap"
+
+UBOOT_QSPIBOOT_SEC = "u-boot.bin-qspi-secure-boot"
+UBOOT_SDBOOT_SEC = "u-boot.bin-sdcard-secure-boot"
+
+UBOOT_SPL = "uboot-sdcard-secure-boot-spl.bin"
+UBOOT_DTB = "uboot-sdcard-secure-boot-dtb.bin"
+
+UBOOT_SCR = "ls1046ardb_boot.scr"
+BOOTSCRIPT_DEC = "ls1046ardb_dec_boot.scr"
+
+SECUREVALIDATE = "setenv secureboot_validate 'load \$devtype \$devnum:2 \$kernelheader_addr_r /secboot_hdrs/ls1046ardb/hdr_linux.out; load \$devtype \$devnum:2 \$fdtheader_addr_r /secboot_hdrs/ls1046ardb/hdr_dtb.out; esbc_validate \$kernelheader_addr_r; esbc_validate \$fdtheader_addr_r'"
+
+SECUREVALIDATE_ENC = "setenv secureboot_validate 'load \$devtype \$devnum:2 \$kernelheader_addr_r /secboot_hdrs/ls1046ardb/hdr_linux.out; esbc_validate \$kernelheader_addr_r;load \$devtype \$devnum:2 \$fdtheader_addr_r /secboot_hdrs/ls1046ardb/hdr_dtb.out; esbc_validate \$fdtheader_addr_r; size \$devtype \$devnum:2 /vmlinuz; echo Encapsulating linux image;setenv key_addr 0x87000000; mw \$key_addr $key_id_1;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr $key_id_2;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr $key_id_3;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr $key_id_4;blob enc \$kernel_addr_r \$load_addr \$filesize \$key_addr; setexpr blobsize \$filesize + 0x30;echo Saving encrypted linux ;save \$devtype \$devnum:2 \$load_addr /vmlinuz \$blobsize;size \$devtype \$devnum:2 /fsl-ls1046a-rdb.dtb;echo Encapsulating dtb image; blob enc \$fdt_addr_r \$load_addr \$filesize \$key_addr; setexpr blobsize \$filesize + 0x30;echo Saving encrypted dtb; save \$devtype \$devnum:2 \$load_addr /fsl-ls1046a-rdb.dtb \$blobsize; size \$devtype \$devnum:2 /ls1046ardb_dec_boot.scr; load \$devtype \$devnum:2 \$load_addr /ls1046ardb_dec_boot.scr; echo replacing Bootscript; save \$devtype \$devnum:2 \$load_addr /ls1046ardb_boot.scr \$filesize;size \$devtype \$devnum:2 /secboot_hdrs/ls1046ardb/hdr_ls1046ardb_bs_dec.out; load \$devtype \$devnum:2 \$load_addr /secboot_hdrs/ls1046ardb/hdr_ls1046ardb_bs_dec.out ;echo Replacing bootscript header; save \$devtype \$devnum:2 \$load_addr /hdr_ls1046ardb_bs.out \$filesize;reset;'"
+
+SECUREVALIDATE_DEC = "setenv secureboot_validate 'size \$devtype \$devnum:2 /vmlinuz;setexpr imgsize \$filesize - 0x30 ;echo Decapsulating linux image; setenv key_addr 0x87000000; mw \$key_addr $key_id_1;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr $key_id_2;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr key_id_3;setexpr \$key_addr \$key_addr + 0x4; mw \$key_addr $key_id_4; blob dec \$kernel_addr_r \$load_addr \$imgsize \$key_addr; cp.b \$load_addr \$kernel_addr_r \$filesize ;size \$devtype \$devnum:2 /fsl-ls1046a-rdb.dtb;setexpr imgsize \$filesize - 0x30 ;echo Decapsulating dtb image; blob dec \$fdt_addr_r \$load_addr \$imgsize \$key_addr; cp.b \$load_addr \$fdt_addr_r \$filesize ; '"
+
+DISTROBOOT = "'part uuid $devtype $devnum:3 partuuid3; setenv bootargs console=ttyS0,115200 earlycon=uart8250,mmio,0x21c0500 root=PARTUUID=$partuuid3 rw rootwait; load $devtype $devnum:2 $kernel_addr_r /vmlinuz;load $devtype $devnum:2 $fdt_addr_r /fsl-ls1046a-rdb.dtb; env exists secureboot && echo validating secureboot && run secureboot_validate; bootm $kernel_addr_r - $fdt_addr_r'"
+
+NAND_SCRIPT = "platforms/ls104x_1012_nand.sh"
+SD_SCRIPT = "platforms/ls104x_1012_sd.sh"
+QSPI_SCRIPT = "platforms/ls104x_1012_qspi.sh"
+NOR_SCRIPT = "platforms/ls104x_1012_nor.sh"
+
+KERNEL_IMG = "Image"
+KERNEL_UIMG  = "uImage"
+DEVICE_TREE = "fsl-ls1046a-rdb.dtb"
+
 KERNEL_DEVICETREE ?= "\
     freescale/fsl-ls1046a-rdb-sdk.dtb \
     freescale/fsl-ls1046a-rdb-usdpaa.dtb \
-- 
1.9.0