[meta-freescale] [3rdparty][PATCH v2] imx7d-pico: Add machine configuration

[Philippe Desrochers]

Hello,

Does anybody know if the Wifi module is enable with this configuration for
the PICO-PI-IMX7 ?

How can I write the built image (kernel/rootfs) to the eMMC ?
Do I have to use the NXP manufacturing tool from here:
https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/i.mx-applications-processors/developer-resources/iot-development-platforms-based-on-i.mx-6ul-7dual-processor-and-android-things-os:IOT-DEV-PLATFORMS-i.MX6UL?tab=Design_Tools_Tab

Thanks




2017-09-14 14:28 GMT-04:00 Vanessa Maegima <vanessa.maegima at nxp.com>:

> Add machine definition for imx7d-pico board.
>
> For more information about this reference design, please visit:
>
> https://www.wandboard.org/products/android-things/PICO-PI-IMX7/
>
> The machine configuration file used to include Yocto Project support to the
> board is a consolidation work only.
>
> It only reflects the work done in Linux kernel, U-Boot and FSL Community
> BSP,
> where the hard work is actually done.
>
> Signed-off-by: Vanessa Maegima <vanessa.maegima at nxp.com>
> ---
> Changes since v1:
> - Remove unnecessary overriding
> - Add wic support
> - Remove unnecessary line COMPATIBLE_MACHINE_imx7d-pico
>
>  conf/machine/imx7d-pico.conf | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 conf/machine/imx7d-pico.conf
>
> diff --git a/conf/machine/imx7d-pico.conf b/conf/machine/imx7d-pico.conf
> new file mode 100644
> index 0000000..80aea98
> --- /dev/null
> +++ b/conf/machine/imx7d-pico.conf
> @@ -0,0 +1,27 @@
> +#@TYPE: Machine
> +#@NAME: IMX7D-PICO
> +#@SOC: i.MX7D
> +#@DESCRIPTION: Machine configuration for IMX7D-PICO board.
> +#@MAINTAINER: Vanessa Maegima <vanessa.maegima at nxp.com>
> +
> +MACHINEOVERRIDES =. "use-mainline-bsp:mx7:mx7d:"
> +
> +require conf/machine/include/imx-base.inc
> +require conf/machine/include/tune-cortexa7.inc
> +
> +SERIAL_CONSOLE = "115200 ttymxc4"
> +
> +KERNEL_DEVICETREE = "imx7d-pico.dtb"
> +
> +UBOOT_MACHINE = "pico-imx7d_defconfig"
> +
> +MACHINE_ESSENTIAL_EXTRA_RDEPENDS += " \
> +    kernel-image \
> +    kernel-devicetree \
> +    u-boot-fslc \
> +"
> +
> +WKS_FILES ?= "imx-uboot.wks"
> +WKS_FILE_DEPENDS ?= ""
> +
> +IMAGE_FSTYPES = "tar.bz2 ext4 wic.gz"
> --
> 2.7.4
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20170927/9e93f02f/attachment.html>