[meta-freescale] [PATCH 05/13] uboot : update to fbedf04

Chunrong Guo B40290 at freescale.com
Mon Oct 30 01:53:49 PDT 2017


From: Chunrong Guo <chunrong.guo at nxp.com>

*include the following changes:
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
07dce79 - board: freescale: ls1012a: fix RGMII tx delay issue
39bd068 - armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID
aad3422 - armv8: configs: ls1012a: correct the generic timer frequency issue
0f0e241 - configs: ls1012a: add pfe configuration for LS1012A
a518a57 - fsl: csu: enable ns access for PFE
d91e382 - armv8: fsl-lsch2: configure pfe's scfg & dcfg registers
99089ae - armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
7b2f1c3 - armv8: fsl-lsch2: initialize pfe gemac
f0640ed - board: freescale: ls1012a: enable network support on ls1012a platforms
af5f822 - drivers: net: pfe_eth: LS1012A PFE headers
676ef26 - drivers: net: pfe_eth: provide pfe commands
74b6833 - drivers: net: pfe_eth: LS1012A PFE driver introduction
3ddb3d3 - armv8: fsl-layerscape: Add support of GPIO structure
091c401 - driver: fsl-mc: memset pointers after malloc
4dcd33d - armv8: ls1088a: Update MC boot sequence
2dcba27 - arm64: ls2088ardb: Fix nor fall back option failure
c64ac4c - QE: Set QE_IRAM_READY after uploading firmware

Signed-off-by: Chunrong Guo <chunrong.guo at nxp.com>
---
 recipes-bsp/u-boot/u-boot-qoriq_2017.09.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2017.09.bb b/recipes-bsp/u-boot/u-boot-qoriq_2017.09.bb
index ed99828..ea9e7c8 100644
--- a/recipes-bsp/u-boot/u-boot-qoriq_2017.09.bb
+++ b/recipes-bsp/u-boot/u-boot-qoriq_2017.09.bb
@@ -20,7 +20,7 @@ DEPENDS_append_qoriq-ppc = " boot-format-native"
 
 SRC_URI = "git://github.com/qoriq-open-source/u-boot.git;nobranch=1 \
 "
-SRCREV = "503eff00a7119d2690a662ed64e83e4782b7d3d9"
+SRCREV = "fbedf04c1bad675eadbac86febdcf759441a02af"
 
 S = "${WORKDIR}/git"
 
-- 
1.9.0



More information about the meta-freescale mailing list