[meta-freescale] [3rdparty][PATCH 4/4] linux-boundary: Bump revision to 719fb24c9923

Mon Nov 20 10:58:38 PST 2017

This commit sync defconfig with Boundary source code and apply the
following changes:

    - 719fb24c9923 imx6qdl-cob2.dtsi: initial commit
    - 3ddcc3bf7b31 sgtl5000: add AVC Attack/Decay, AVC threshold low is -96.00 db
    - 2403224a895e sgtl5000: fix Bass Filter Feq start bit, add bass HPF
    - 28193fdd0c38 sgtl5000: and DAP module processing
    - 0ec88cec6d57 fix mxc_v4l2_capture: add vflip and mirror to sensor_data
    - 12ac2d3e92b2 ARM: dts: imx6qdl-cid_tab: fix camera orientation
    - 5cfa3fdba84b ov5640_mipi: allow to override vflip and mirror values
    - 1b4fa6d2d4e3 ov5640: allow to override vflip and mirror values
    - ba49388f06a7 mxc_v4l2_capture: add vflip and mirror to sensor_data
    - f7714e963069 video: mxc: mipi_rm68200: remove start delays
    - ee4b77691dd1 video: mxc: mipi_dsi: reduce status delays
    - 646c810af677 ARM: dts: imx6qdl-cid_tab: expose RGB LEDs individually
    - 1f47a2c2407c ARM: dts: imx6qdl-cid: expose RGB LEDs individually
    - cfd5205144ae ARM: dts: imx6qdl-cid_tab: bump charging current for HV_MAINS/WC to 2.1A
    - a9e134ebe037 ARM: dts: imx6qdl-cid: bump charging current for HV_MAINS to 2.1A
    - 688c9c3f4d77 ARM: dts: imx6qdl-cid_tab: set battery capacity
    - ae6702137456 ARM: dts: imx6qdl-cid: set battery capacity
    - 8d5cf1dd8c85 max77823: fuelgauge: allow to override battery capacity
    - 05dddb49125a max77823: fuelgauge: reset battery values after POR
    - b5e15ebd57ab max77823: fuelgauge: fix reset function
    - c7ad0abcc008 max77823: fuelgauge: fix dynamic scale computation
    - 6d37635eb22b tty: serial: imx: wait until a character is about to be transmitted before enabling the RS485 transmitter
    - 2f9ee08acbc6 tty: serial: imx: use scatterlist for rx dma
    - 5c1fab375c77 tty: serial: imx: change tsk_dma_tx to plain work_struct
    - f1e9beffb7e8 serial: imx-serial - update RX error counters when DMA is used
    - 4aca91d47fb6 tty: serial: imx: remove dma_rx_work
    - 00adde7698b2 arch/arm/boot/dts/imx6qdl-ap.dtsi: initial addition
    - 1c2224ae1e2d boundary_defconfig: make hdmi audio a modules, CONFIG_SND_SOC_IMX_HDMI=m
    - 444102a656dd imx6qdl-h4.dtsi: KEY_COL0 must be UART4_TX_DATA
    - be7be3a4e56c sgtl5000: add bass controls
    - f7cc79eff5f3 imx6qdl-hp.dtsi: always have otg_vbus on, it does not leave this board
    - 9eba3d40a0fc tty: serial: imx: switch from ageing timer to idle to avoid UART sdma script bug
    - 4f35eb7cca03 net: fec: remove QUIRK_HAS_RACC from i.mx27
    - 52d2469b55eb net: fec: remove QUIRK_HAS_RACC from i.mx25
    - 8f3b77ea38bd MLK-14333 firmware: imx: sdma: fix SSI dual fifo swap
    - 74f04ec66272 ARM: imx6q: support ptp and rmii clock from pad
    - da999c39acec ARM: dts: imx6qdl-cid_tab: swap goodix touch axes
    - 9d2a20394fa3 Input: goodix - remove single touch reports
    - 90eff99d70b8 Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"
    - 4771b34caae1 Input: goodix - add axis swapping and axis inversion support
    - d8d55b7d8752 ARM: dts: imx6qdl-cid: force USB H1 device id
    - d8f1e3f53cff usb: chipidea: allow to override id from device tree
    - 6067115920fd net: fec: Call swap_buffer() prior to IP header alignment
    - b924590deced net: fec: align IP header in hardware
    - 4030d318f8d6 boundary_defconfig: add CONFIG_BRIDGE, needed for bluetooth PAN
    - a5bdde5ddd05 sec_battery: make AC online depend on both battery health and charger health
    - b16b65a5b97f goodix: adding gt928 to i2c_device_id table lets modprobe be automatic
    - 1f39203ce15b Revert "max77823_charger: favor chgin over wcin"
    - 1c1f08bd0e1f imx6qdl-cid_tab: use pwm3 instead of pwm1 to control lvds backlight
    - 8ffe053250f4 max77823_charger: favor chgin over wcin
    - e0f21b50a959 pwm_bl: allow an array of enable pins
    - 13fb24caf547 nitrogen6_vm_pt_defconfig: initial addition
    - 3ac8e32d322b nitrogen51_vm_defconfig: use Andrew's settings, the only user of this defconfig
    - 237892e1726d input: touchscreen: ft5x06: select REGMAP_I2C in Kconfig
    - c24bab70914f imx6sx-ys.dts: pullup RESET_DSP_N
    - f4a6076e1143 ARM: dts: imx6q-cid_tab: initial addition
    - ea4201a38c70 imx6qdl-nitrogen6x.dtsi: s/ov5640_int/ovti,ov5640/
    - 46d3bbf75727 ov5640: add ov5640_int to ov5640_id table
    - 4b5f16e4857d ov5642: improve error message
    - 7c5c37544ae7 max77823_charger: update otg_vbus_enabled in the regulator notifier callback
    - 83059e5e06dc ov5640_mipi: remove ov5640_reg file on rmmod
    - aedfdbb024a2 max77823_charger: don't call max77823_set_online directly, have battery do it
    - adfb14277c18 sec_battery: avoid 'Undefine Battery Status' when not charging
    - c647c9e98f5b tools include: Add a __fallthrough statement
    - ef46e9519ce8 max77823_fuelgauge: fix current_now/current_avg when negative
    - ce1bc18798ae sec_battery: call chargers POWER_SUPPLY_PROP_STATUS, when battery's status changes
    - 8d5aabcc73a5 imx6qdl-ash2.dtsi: initial addition
    - 1d5286fd2181 imx6qdl-ash.dtsi: map ttymxc3 to UART3 to match ash2
    - e03025b9cc77 imx6q-neol-tst.dts: use EIM_DA7 for GP_5V_DLP_EN
    - dee9694b8283 imx6qdl-neol.dtsi: use EIM_DA7 for GP_5V_DLP_EN
    - f67ef4b07eb2 imx6qdl-ash.dtsi: gpio_3 is poweroff only
    - 18b43433c84b max77823_charger: maker as undervoltage if we supply otg vbus power
    - 8869166a01d7 imx6qdl-cid.dtsi: no need to poll for charger health
    - 341bae211c71 max77823_charger: sep

Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
---
 .../linux/linux-boundary-4.1.15/defconfig          | 81 +++-------------------
 recipes-kernel/linux/linux-boundary_4.1.15.bb      |  2 +-
 2 files changed, 11 insertions(+), 72 deletions(-)

diff --git a/recipes-kernel/linux/linux-boundary-4.1.15/defconfig b/recipes-kernel/linux/linux-boundary-4.1.15/defconfig
index b335f52..557c500 100644
--- a/recipes-kernel/linux/linux-boundary-4.1.15/defconfig
+++ b/recipes-kernel/linux/linux-boundary-4.1.15/defconfig
@@ -10,6 +10,9 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
@@ -23,17 +26,14 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MXC=y
-CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_IMX6SX=y
-CONFIG_SOC_IMX7D=y
 CONFIG_ARM_KERNMEM_PERMS=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -42,7 +42,7 @@ CONFIG_KSM=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
 CONFIG_CMA=y
 CONFIG_SECCOMP=y
-CONFIG_CMDLINE="console=ttymxc1,115200"
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
@@ -51,7 +51,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
-CONFIG_ARM_IMX7D_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
@@ -83,7 +82,6 @@ CONFIG_LLC2=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
 CONFIG_CAN_M_CAN=y
-CONFIG_CAN_MCP251X=m
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
@@ -96,7 +94,6 @@ CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_CFG80211=m
-CONFIG_NL80211_TESTMODE=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -137,7 +134,6 @@ CONFIG_PATA_IMX=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_DM=y
 CONFIG_NETDEVICES=y
-CONFIG_TUN=m
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -186,17 +182,13 @@ CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_CWC_HOOKSWITCH=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_AR1020_I2C=m
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_CR_MULTI=m
-CONFIG_TOUCHSCREEN_EGALAX=m
-CONFIG_TOUCHSCREEN_FT5X06=m
+CONFIG_TOUCHSCREEN_AR1020_I2C=y
+CONFIG_TOUCHSCREEN_CR_MULTI=y
+CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_FT5X06=y
 CONFIG_TOUCHSCREEN_GOODIX=m
-CONFIG_TOUCHSCREEN_GSLX680=m
-CONFIG_TOUCHSCREEN_ILI210X=m
-CONFIG_TOUCHSCREEN_PIC16F616=m
-CONFIG_TOUCHSCREEN_TSC2004=m
-CONFIG_TOUCHSCREEN_AR1010_UART=m
+CONFIG_TOUCHSCREEN_ILI210X=y
+CONFIG_TOUCHSCREEN_TSC2004=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
@@ -204,14 +196,10 @@ CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_GPS_MAX7W=m
-CONFIG_SERIAL_SC16IS7XX=m
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_XR20M117X=m
 CONFIG_FSL_OTP=y
 CONFIG_MAGSTRIPE=m
-CONFIG_SAS=m
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_GPIO=y
@@ -224,10 +212,6 @@ CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_SENSORS_ADS1000=m
-CONFIG_SENSORS_MAG3110=y
 # CONFIG_MXC_MMA8451 is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
@@ -235,50 +219,30 @@ CONFIG_IMX_THERMAL=y
 CONFIG_DEVICE_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX_SPI=m
-CONFIG_MFD_MAX77823=y
-CONFIG_MFD_ARIZONA_SPI=m
-CONFIG_MFD_WM5102=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
-CONFIG_REGULATOR_ARIZONA=m
-CONFIG_REGULATOR_MC13892=m
-CONFIG_REGULATOR_PFUZE100=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
 CONFIG_MEDIA_RADIO_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
-CONFIG_MEDIA_PCI_SUPPORT=y
-CONFIG_VIDEO_TW686X=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_MXC_OUTPUT=y
 CONFIG_VIDEO_MXC_CAPTURE=m
 CONFIG_MXC_CAMERA_OV5640=m
 CONFIG_MXC_CAMERA_OV5642=m
 CONFIG_MXC_CAMERA_OV5640_MIPI=m
-CONFIG_MXC_VIDEO_GS2971=m
-CONFIG_MXC_HDMI_CSI2_TC358743=m
-CONFIG_TC358743_AUDIO=y
 CONFIG_MXC_TVIN_ADV7180=m
 CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
 CONFIG_VIDEO_MXC_IPU_OUTPUT=y
 CONFIG_VIDEO_MXC_PXP_V4L2=y
-CONFIG_VIDEO_MXC_CSI_CAMERA=m
-CONFIG_MXC_CAMERA_SUBDEV_OV5640=m
-CONFIG_MXC_CAMERA_SUBDEV_OV5642=m
-CONFIG_MXC_VADC=m
-CONFIG_MXC_MIPI_CSI=m
-CONFIG_MXC_CAMERA_SUBDEV_OV5640_MIPI=m
 CONFIG_SOC_CAMERA=y
 CONFIG_DRM=y
 CONFIG_DRM_VIVANTE=y
 CONFIG_FB=y
 CONFIG_FB_MXS=y
 CONFIG_FB_MXC_SYNC_PANEL=y
-CONFIG_FB_MXC_TVOUT_ADV739X=y
 CONFIG_FB_MXC_LDB=y
 CONFIG_FB_MXC_HDMI=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -287,26 +251,19 @@ CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
-CONFIG_BACKLIGHT_LP8860=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_DVI_TFP410=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_IMX_WM8960=m
 CONFIG_SND_SOC_IMX_SGTL5000=y
-CONFIG_SND_SOC_IMX_WM5102=m
 CONFIG_SND_SOC_IMX_HDMI=y
 CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_ACM=y
 CONFIG_USB_STORAGE=y
@@ -321,7 +278,6 @@ CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_PL2303=y
 CONFIG_USB_SERIAL_QUALCOMM=y
 CONFIG_USB_SERIAL_OPTION=m
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
@@ -335,13 +291,9 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MXC_IPU=y
-CONFIG_MXC_IPU_V3_PRE=y
-CONFIG_MXC_SIM=y
 CONFIG_MXC_MIPI_CSI2=y
-CONFIG_MXC_HDMI_CEC=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
@@ -351,23 +303,14 @@ CONFIG_RTC_DRV_RV4162=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_MXC_PXP_V2=y
-CONFIG_MXC_PXP_V3=y
 # CONFIG_MX3_IPU is not set
 CONFIG_IMX_SDMA=y
-CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
-CONFIG_DRM_ANX78XX=m
-CONFIG_COMMON_CLK_PWM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=y
 CONFIG_IIO=y
-CONFIG_APDS9300=m
 CONFIG_PWM=y
 CONFIG_PWM_IMX=y
-CONFIG_BATTERY_SAMSUNG=y
-CONFIG_FUELGAUGE_MAX77823=m
-CONFIG_FUELGAUGE_MAX77823_COULOMB_COUNTING=y
-CONFIG_CHARGER_MAX77823=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -383,7 +326,6 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
-CONFIG_OVERLAY_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -391,8 +333,6 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_ECRYPT_FS=y
 CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_EMBEDDED=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
@@ -404,7 +344,6 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_INFO=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/recipes-kernel/linux/linux-boundary_4.1.15.bb b/recipes-kernel/linux/linux-boundary_4.1.15.bb
index 04eb4bc..55e8715 100644
--- a/recipes-kernel/linux/linux-boundary_4.1.15.bb
+++ b/recipes-kernel/linux/linux-boundary_4.1.15.bb
@@ -11,6 +11,6 @@ SRC_URI = "git://github.com/boundarydevices/linux-imx6.git;branch=${SRCBRANCH} \
 
 LOCALVERSION = "-2.0.0-ga+yocto"
 SRCBRANCH = "boundary-imx_4.1.15_2.0.0_ga"
-SRCREV = "ff4e28b95115d7021c3ea6209b7c2b0b849874e1"
+SRCREV = "719fb24c9923e424d25d1828cdd0c86f11ccb147"
 DEPENDS += "lzop-native bc-native"
 COMPATIBLE_MACHINE = "(nitrogen6x|nitrogen6x-lite|nitrogen6sx|nitrogen7)"
-- 
2.14.2

