[meta-freescale] unable to initialize libusb: -99
Takashi Matsuzawa
tmatsuzawa at xevo.com
Mon Jul 10 06:01:33 PDT 2017
Hello.
Attached my logs for both. My configuration is below, and there no tuner/gps, etc. attached to the board.
MCIMX6x(Q)AICPU2 (CPU)
MCIMXABASEV1 (base)
Lools like both logs share warning messages as well.
________________________________
From: Fabio Estevam <festevam at gmail.com>
Sent: Monday, July 10, 2017 8:38 PM
To: Takashi Matsuzawa
Cc: Otavio Salvador; meta-freescale at yoctoproject.org
Subject: Re: [meta-freescale] unable to initialize libusb: -99
Hi Takashi,
On Mon, Jul 10, 2017 at 8:25 AM, Fabio Estevam <festevam at gmail.com> wrote:
> The errors we see in some peripherals like audio codec, audio tuner is
> because these devices are present in the base board only.
Just reviewed your logs and it seems you use the base board.
Can you please use the NXP U-Boot (PREFERRED_PROVIDER_uboot =
"u-boot-imx" like you did before) and check whether the tuner is
probed correctly?
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20170710/7ef10648/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fabio2.tar.bz2
Type: application/octet-stream
Size: 17372 bytes
Desc: fabio2.tar.bz2
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20170710/7ef10648/attachment.obj>
More information about the meta-freescale
mailing list