[meta-freescale] Updates to meta-freescale (master) in 2017-08-07
C.r. Guo
chunrong.guo at nxp.com
Tue Aug 8 00:50:11 PDT 2017
Hello bob,
I have test kernel 4.4 work well.
the below test steps:
steps:
1. flash uboot
=> setenv faddr_uboot 0x64100000
=> setenv faddr_rcw 0x64000000
=> setenv raddr_temp 0x81000000
=> setenv img_uboot u-boot-nor-2017.03+fslgit-r0.bin
=> ftpboot $raddr_temp $img_uboot
=> if cmp.b $raddr_temp $faddr_rcw $filesize; then echo "No update"; else protect off $faddr_rcw +$filesize && erase $faddr_rcw +$filesize && cp.b $raddr_temp $faddr_rcw $filesize && protect on $faddr_rcw +$filesize; fi
2. boot_bank 1
3 . tftp 83000000 b40290/uImage-ls1021atwr.bin;tftp 88000000 b40290/core-image-minimal-ls1021atwr.ext2.gz.u-boot;tftp 8f000000 b40290/uImage-ls1021a-twr.dtb;
4 . bootm 83000000 88000000 8f000000
Can you check your board silicon version?
Thanks
Chunrong
-----Original Message-----
From: Zhenhua Luo
Sent: Tuesday, August 08, 2017 11:47 AM
To: Otavio Salvador <otavio.salvador at ossystems.com.br>; Bob Cochran <yocto at mindchasers.com>
Cc: meta-freescale at yoctoproject.org; White Weng <white.weng at nxp.com>; C.r. Guo <chunrong.guo at nxp.com>
Subject: RE: [meta-freescale] Updates to meta-freescale (master) in 2017-08-07
Hi Bob,
We have conducted testing before sending out those patches, including boot on supported boards.
We are checking the boot issue on ls1021atwr board currently and will provide feedback soon.
Best Regards,
Zhenhua
> -----Original Message-----
> From: Otavio Salvador [mailto:otavio.salvador at ossystems.com.br]
> Sent: Tuesday, August 08, 2017 2:01 AM
> To: Bob Cochran <yocto at mindchasers.com>; Zhenhua Luo
> <zhenhua.luo at nxp.com>
> Cc: meta-freescale at yoctoproject.org; White Weng <white.weng at nxp.com>
> Subject: Re: [meta-freescale] Updates to meta-freescale (master) in
> 2017-08-07
>
> Hello Bob,
>
> On Mon, Aug 7, 2017 at 1:37 PM, Bob Cochran <yocto at mindchasers.com>
> wrote:
> > On 08/07/2017 10:46 AM, otavio.salvador at gmail.com wrote:
> > FYI - I just pulled and built linux-qoriq_4.4 for a TWR-LS1021A-PB.
> > I used the default defconfig and dtb files. The kernel hung on boot.
> >
> > Have the patches been tested on this particular board? If it's known to
> > work elsewhere, I'll dig in further and report back.
> >
> > I think it would be a good idea to leave linux_qoriq_4.1.bb in
> > recipes-kernel/linux until there is good feedback on 4.4
>
> I don't own those boards so I cannot run tests prior the merge; as it
> came from QorIQ team I assumed it was tested before sending the patches.
>
> Adding the 4.1 next to 4.4 won't help in fixing the issue, I rather
> prefer NXP does prepare a fix or we revert it all together.
>
> Luo?
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list