[meta-freescale] [meta-fsl-arm][PATCH 2/2] firmware-imx: Install the firmware on a subfolders

[Daiane Angolini]

The package provides firware files for 4 different modules.

This patch install each module in a different subfolder, so both can coexist.

Signed-off-by: Daiane Angolini <daiane.angolini at nxp.com>
---
Changes since v1:
- commit subject
- commit log
- instead of renaming the firmware file, install them in a subfolder

 recipes-bsp/firmware-imx/firmware-imx.inc | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/recipes-bsp/firmware-imx/firmware-imx.inc b/recipes-bsp/firmware-imx/firmware-imx.inc
index 90218c9..cded771 100644
--- a/recipes-bsp/firmware-imx/firmware-imx.inc
+++ b/recipes-bsp/firmware-imx/firmware-imx.inc
@@ -22,23 +22,27 @@ do_install() {
     cp -rfv firmware/* ${D}${base_libdir}/firmware/
 
     #1BW_BCM43340
-    cp -rfv git/brcm/1BW_BCM43340/*.bin ${D}${base_libdir}/firmware/bcm
-    cp -rfv git/brcm/1BW_BCM43340/*.cal ${D}${base_libdir}/firmware/bcm
+    install -d ${D}${base_libdir}/firmware/bcm/1BW_BCM43340
+    cp -rfv git/brcm/1BW_BCM43340/*.bin ${D}${base_libdir}/firmware/bcm/1BW_BCM43340
+    cp -rfv git/brcm/1BW_BCM43340/*.cal ${D}${base_libdir}/firmware/bcm/1BW_BCM43340
     cp -rfv git/brcm/1BW_BCM43340/*.hcd ${D}${sysconfdir}/firmware/
 
     #1DX_BCM4343W
-    cp -rfv git/brcm/1DX_BCM4343W/*.bin ${D}${base_libdir}/firmware/bcm
-    cp -rfv git/brcm/1DX_BCM4343W/*.cal ${D}${base_libdir}/firmware/bcm
+    install -d ${D}${base_libdir}/firmware/bcm/1DX_BCM4343W
+    cp -rfv git/brcm/1DX_BCM4343W/*.bin ${D}${base_libdir}/firmware/bcm/1DX_BCM4343W
+    cp -rfv git/brcm/1DX_BCM4343W/*.cal ${D}${base_libdir}/firmware/bcm/1DX_BCM4343W
     cp -rfv git/brcm/1DX_BCM4343W/*.hcd ${D}${sysconfdir}/firmware/
 
     #SN8000_BCM43362
-    cp -rfv git/brcm/SN8000_BCM43362/*.bin ${D}${base_libdir}/firmware/bcm
-    cp -rfv git/brcm/SN8000_BCM43362/*.cal ${D}${base_libdir}/firmware/bcm
+    install -d ${D}${base_libdir}/firmware/bcm/SN8000_BCM43362
+    cp -rfv git/brcm/SN8000_BCM43362/*.bin ${D}${base_libdir}/firmware/bcm/SN8000_BCM43362
+    cp -rfv git/brcm/SN8000_BCM43362/*.cal ${D}${base_libdir}/firmware/bcm/SN8000_BCM43362
     cp -rfv git/brcm/1DX_BCM4343W/*.hcd ${D}${sysconfdir}/firmware/
 
     #ZP_BCM4339
-    cp -rfv git/brcm/ZP_BCM4339/*.bin ${D}${base_libdir}/firmware/bcm
-    cp -rfv git/brcm/ZP_BCM4339/*.cal ${D}${base_libdir}/firmware/bcm
+    install -d ${D}${base_libdir}/firmware/bcm/ZP_BCM4339
+    cp -rfv git/brcm/ZP_BCM4339/*.bin ${D}${base_libdir}/firmware/bcm/ZP_BCM4339
+    cp -rfv git/brcm/ZP_BCM4339/*.cal ${D}${base_libdir}/firmware/bcm/ZP_BCM4339
     cp -rfv git/brcm/ZP_BCM4339/*.hcd ${D}${sysconfdir}/firmware/
 
     mv ${D}${base_libdir}/firmware/epdc/ ${D}${base_libdir}/firmware/imx/epdc/
@@ -74,6 +78,6 @@ PACKAGES_DYNAMIC = "${PN}-vpu-* ${PN}-sdma-*"
 PACKAGES =+ "${PN}-epdc ${PN}-brcm"
 
 FILES_${PN}-epdc = "${base_libdir}/firmware/imx/epdc/"
-FILES_${PN}-brcm = "${base_libdir}/firmware/bcm/*.bin ${base_libdir}/firmware/bcm/*.cal ${sysconfdir}/firmware/"
+FILES_${PN}-brcm = "${base_libdir}/firmware/bcm/*/*.bin ${base_libdir}/firmware/bcm/*/*.cal ${sysconfdir}/firmware/"
 
 PACKAGE_ARCH = "${MACHINE_SOCARCH}"
-- 
2.7.4