[meta-freescale] [u-boot-fslc][PATCH 2/2] configs: wandboard: Set fdt based on board_rev and board_name

[Fabio Berton]

New kernel linux-wandboard version 4.1.15_1.1.0_ga changed device tree
name adding board revision on file name. The new names are:

 - imx6dl-wandboard-revb1
 - imx6dl-wandboard-revc1
 - imx6q-wandboard-revb1
 - imx6q-wandboard-revc1

Add condition to set correct fdt name based on board_rev and board_name.

Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
---
 include/configs/wandboard.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 29b4be3..801be39 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -147,10 +147,14 @@
 		"fi; " \
 		"setenv bootargs ${bootargs} ${fbmem}\0" \
 	"findfdt="\
-		"if test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
-		"if test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
+		"if test $board_rev = MX6Q && test $board_name = B1 ; then " \
+			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
+		"if test $board_rev = MX6Q && test $board_name = C1 ; then " \
+			"setenv fdtfile imx6q-wandboard-revc1.dtb; fi; " \
+		"if test $board_rev = MX6DL && test $board_name = B1; then " \
+			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
+		"if test $board_rev = MX6DL && test $board_name = C1; then " \
+			"setenv fdtfile imx6dl-wandboard-revc1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-- 
2.1.4