[meta-freescale] [Documentation][PATCH v2 1/3] FAQ: Remove this document
Daiane Angolini
daiane.list at gmail.com
Wed Nov 30 12:05:07 PST 2016
From: Daiane Angolini <daiane.angolini at nxp.com>
There is no evidence this document is used. It's a while since last update.
Signed-off-by: Daiane Angolini <daiane.angolini at nxp.com>
---
changes since v1:
- remove FAQ reference from bsp-scope.rst file.
FAQ/Makefile | 153 -----------------------
FAQ/make.bat | 190 -----------------------------
FAQ/source/all.rst | 144 ----------------------
FAQ/source/conf.py | 242 -------------------------------------
FAQ/source/index.rst | 21 ----
release-notes/source/bsp-scope.rst | 4 +-
6 files changed, 2 insertions(+), 752 deletions(-)
delete mode 100644 FAQ/Makefile
delete mode 100644 FAQ/make.bat
delete mode 100644 FAQ/source/all.rst
delete mode 100644 FAQ/source/conf.py
delete mode 100644 FAQ/source/index.rst
diff --git a/FAQ/Makefile b/FAQ/Makefile
deleted file mode 100644
index f31e089..0000000
--- a/FAQ/Makefile
+++ /dev/null
@@ -1,153 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS =
-SPHINXBUILD = sphinx-build
-PAPER =
-BUILDDIR = build
-
-# Internal variables.
-PAPEROPT_a4 = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
- @echo "Please use \`make <target>' where <target> is one of"
- @echo " html to make standalone HTML files"
- @echo " dirhtml to make HTML files named index.html in directories"
- @echo " singlehtml to make a single large HTML file"
- @echo " pickle to make pickle files"
- @echo " json to make JSON files"
- @echo " htmlhelp to make HTML files and a HTML help project"
- @echo " qthelp to make HTML files and a qthelp project"
- @echo " devhelp to make HTML files and a Devhelp project"
- @echo " epub to make an epub"
- @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
- @echo " latexpdf to make LaTeX files and run them through pdflatex"
- @echo " text to make text files"
- @echo " man to make manual pages"
- @echo " texinfo to make Texinfo files"
- @echo " info to make Texinfo files and run them through makeinfo"
- @echo " gettext to make PO message catalogs"
- @echo " changes to make an overview of all changed/added/deprecated items"
- @echo " linkcheck to check all external links for integrity"
- @echo " doctest to run all doctests embedded in the documentation (if enabled)"
-
-clean:
- -rm -rf $(BUILDDIR)/*
-
-html:
- $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
- $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
- $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
- @echo
- @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
- $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
- @echo
- @echo "Build finished; now you can process the pickle files."
-
-json:
- $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
- @echo
- @echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
- $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
- @echo
- @echo "Build finished; now you can run HTML Help Workshop with the" \
- ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
- $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
- @echo
- @echo "Build finished; now you can run "qcollectiongenerator" with the" \
- ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
- @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/FreescaleCommunityBSPFAQ.qhcp"
- @echo "To view the help file:"
- @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/FreescaleCommunityBSPFAQ.qhc"
-
-devhelp:
- $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
- @echo
- @echo "Build finished."
- @echo "To view the help file:"
- @echo "# mkdir -p $$HOME/.local/share/devhelp/FreescaleCommunityBSPFAQ"
- @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/FreescaleCommunityBSPFAQ"
- @echo "# devhelp"
-
-epub:
- $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
- @echo
- @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo
- @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
- @echo "Run \`make' in that directory to run these through (pdf)latex" \
- "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo "Running LaTeX files through pdflatex..."
- $(MAKE) -C $(BUILDDIR)/latex all-pdf
- @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
- $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
- @echo
- @echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
- $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
- @echo
- @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo
- @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
- @echo "Run \`make' in that directory to run these through makeinfo" \
- "(use \`make info' here to do that automatically)."
-
-info:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo "Running Texinfo files through makeinfo..."
- make -C $(BUILDDIR)/texinfo info
- @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
- $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
- @echo
- @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
- $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
- @echo
- @echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
- $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
- @echo
- @echo "Link check complete; look for any errors in the above output " \
- "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
- $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
- @echo "Testing of doctests in the sources finished, look at the " \
- "results in $(BUILDDIR)/doctest/output.txt."
diff --git a/FAQ/make.bat b/FAQ/make.bat
deleted file mode 100644
index 6e83cdb..0000000
--- a/FAQ/make.bat
+++ /dev/null
@@ -1,190 +0,0 @@
- at ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
- set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
-set I18NSPHINXOPTS=%SPHINXOPTS% source
-if NOT "%PAPER%" == "" (
- set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
- set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
- :help
- echo.Please use `make ^<target^>` where ^<target^> is one of
- echo. html to make standalone HTML files
- echo. dirhtml to make HTML files named index.html in directories
- echo. singlehtml to make a single large HTML file
- echo. pickle to make pickle files
- echo. json to make JSON files
- echo. htmlhelp to make HTML files and a HTML help project
- echo. qthelp to make HTML files and a qthelp project
- echo. devhelp to make HTML files and a Devhelp project
- echo. epub to make an epub
- echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
- echo. text to make text files
- echo. man to make manual pages
- echo. texinfo to make Texinfo files
- echo. gettext to make PO message catalogs
- echo. changes to make an overview over all changed/added/deprecated items
- echo. linkcheck to check all external links for integrity
- echo. doctest to run all doctests embedded in the documentation if enabled
- goto end
-)
-
-if "%1" == "clean" (
- for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
- del /q /s %BUILDDIR%\*
- goto end
-)
-
-if "%1" == "html" (
- %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/html.
- goto end
-)
-
-if "%1" == "dirhtml" (
- %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
- goto end
-)
-
-if "%1" == "singlehtml" (
- %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
- goto end
-)
-
-if "%1" == "pickle" (
- %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can process the pickle files.
- goto end
-)
-
-if "%1" == "json" (
- %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can process the JSON files.
- goto end
-)
-
-if "%1" == "htmlhelp" (
- %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
- goto end
-)
-
-if "%1" == "qthelp" (
- %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
- echo.^> qcollectiongenerator %BUILDDIR%\qthelp\FreescaleCommunityBSPFAQ.qhcp
- echo.To view the help file:
- echo.^> assistant -collectionFile %BUILDDIR%\qthelp\FreescaleCommunityBSPFAQ.ghc
- goto end
-)
-
-if "%1" == "devhelp" (
- %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished.
- goto end
-)
-
-if "%1" == "epub" (
- %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The epub file is in %BUILDDIR%/epub.
- goto end
-)
-
-if "%1" == "latex" (
- %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
- goto end
-)
-
-if "%1" == "text" (
- %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The text files are in %BUILDDIR%/text.
- goto end
-)
-
-if "%1" == "man" (
- %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The manual pages are in %BUILDDIR%/man.
- goto end
-)
-
-if "%1" == "texinfo" (
- %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
- goto end
-)
-
-if "%1" == "gettext" (
- %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
- goto end
-)
-
-if "%1" == "changes" (
- %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
- if errorlevel 1 exit /b 1
- echo.
- echo.The overview file is in %BUILDDIR%/changes.
- goto end
-)
-
-if "%1" == "linkcheck" (
- %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
- if errorlevel 1 exit /b 1
- echo.
- echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
- goto end
-)
-
-if "%1" == "doctest" (
- %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
- if errorlevel 1 exit /b 1
- echo.
- echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
- goto end
-)
-
-:end
diff --git a/FAQ/source/all.rst b/FAQ/source/all.rst
deleted file mode 100644
index a41aea9..0000000
--- a/FAQ/source/all.rst
+++ /dev/null
@@ -1,144 +0,0 @@
-How can I contribute to the project?
-------------------------------------
-
-* Subscribe to the `mailing list <http://freescale.github.io/#contributing>`_
-* Check the ``README`` file of the layer you are trying to patch. It lists the
- steps to start contributing. To summarize: create your commits locally,
- format them into patches (``git format-patch``) and send them to the
- list (``git send-email``)
-
-How can I build an image?
--------------------------
-
-Steps are detailed here: `fsl-community-bsp-platform <https://github.com/Freescale/fsl-community-bsp-platform>`_
-
-
-BitBake encountered an error, what can I do?
---------------------------------------------
-
-A single answer can not be given due to the full range of possible errors. However, here are some suggestions:
-
-* Check the mailing list to see if this error has been previously reported
-* Clean-State the recipe that raised the error: ``bitbake -c cleansstate <PN>`` where ``PN`` is the recipe's name
-* Check the log carefully by looking at the ``log`` files listed by the output from ``bitbake``
-
-
-Which packages are included in an image?
-----------------------------------------
-
-Generate the `dot` file and filter out the native packages:
-
- $ bitbake -g <image-name> && cat pn-depends.dot | grep -v 'native' | more
-
-where ``<image-name>`` is the name of the image you are building, i.e. ``core-image-minimal``
-
-
-Which packages are available to be installed?
----------------------------------------------
-
-Use the ``bitbake-layers`` script::
-
- $ bitbake-layers show-recipes | more
-
-
-Which layers do I have configured?
-----------------------------------
-
-Use the ``bitbake-layers`` script::
-
- $ bitbake-layers show-layers
-
-How do I add a package to an image?
------------------------------------
-
-Two of the ways are:
-
-* Add ``IMAGE_INSTALL_append = " package-name-1 package-name-2 ..."`` to your
- ``local.conf`` file. Make sure there is a space after the opening quote '"'!
-
-* Add ``CORE_IMAGE_EXTRA_INSTALL = "package-name-1 package-name-2 ..."`` to your ``local.conf`` file
-
-
-How can I build an image containing the mainline Linux Kernel?
---------------------------------------------------------------
-
-* Add ``PREFERRED_PROVIDER_virtual/kernel = "linux-fslc"`` to your ``local.conf``
- file.
-
-* Clean the kernel's provider (state) and bake the image again::
-
- $ bitbake -c cleansstate virtual/kernel
- $ bitbake $IMAGE_NAME
-
-How can I switch to Soft Floating Point?
-----------------------------------------
-
-By default, the system is configured for hard floating point. To change to soft floating point,
-add ``DEFAULTTUNE_mx6 = "cortexa9-neon"`` to your ``local.conf`` file (or machine file).
-
-How do I enable Chromiun?
--------------------------
-
-To be added
-
-How do I enable QT5.2?
-----------------------
-
-To be added
-
-How can I modify source code and compile it?
---------------------------------------------
-
-* Make your source code changes in the appropriate `tmp/work <http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#finding-the-temporary-source-code>`_ folder
-
-* Force compilation and (re)build::
-
- $ bitbake -c compile -f <recipe name>
- $ bitbake <recipe name>
-
-How can I create a patch?
--------------------------
-
-Yocto was not intended to be a package development framework, but in case you need to patch
-a recipe, follow the `kernel patching guide <http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#patching-the-kernel>`_ . For the Yocto Project, the kernel is like any other recipe, so this guide can be applied to any recipe.
-
-How do I create a layer?
-------------------------
-
-* Create the new layer with the ``yocto-layer`` script::
-
- $ yocto-layer create <layer-name>
-
- where ``layer-name`` is the name of the layer you want to create.
-
-* `Enable <http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#enabling-your-layer>`_ your layer
-
-What are the host packages needed for Yocto Project?
-----------------------------------------------------
-
-* Make sure your Linux host / distribution is `supported <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#detailed-supported-distros>`_ by the Yocto Project.
-
-* Packages `needed <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#required-packages-for-the-host-development-system>`_
-
-
-How can I save space after a build?
------------------------------------
-
-* Add ``INHERIT += "rm_work"`` to your ``local.conf`` file. This feature will instruct
- ``BitBake`` to remove the working folder ``tmp/work`` after (bit)baking, so the next
- time you create an image it will basically execute all recipe tasks except the
- fetching step.
-
-* In case you just need a particular file system type, add ``IMAGE_FSTYPES = "tar.bz2"``
- to your ``local.conf``.
-
-Where do I check for known bugs?
---------------------------------
-
-The known bugs are tracked using `Yocto Project Bugzilla <https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=meta-freescale>`_
-
-
-Are there prebuilt images available?
-------------------------------------
-
-Yes, kindly provided by `O.S. Systems <http://ci.ossystems.com.br/public/fsl-community-bsp/>`_
diff --git a/FAQ/source/conf.py b/FAQ/source/conf.py
deleted file mode 100644
index b9bfce6..0000000
--- a/FAQ/source/conf.py
+++ /dev/null
@@ -1,242 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# Freescale Community BSP FAQ documentation build configuration file, created by
-# sphinx-quickstart on Mon Mar 10 16:54:03 2014.
-#
-# This file is execfile()d with the current directory set to its containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys, os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration -----------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be extensions
-# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
-extensions = []
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'Freescale Community BSP FAQ'
-copyright = u'2014-2016, Freescale Community BSP Team'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version or version name if applicable.
-version = 'morty'
-# The full version, including alpha/beta/rc tags.
-release = '2.2'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = []
-
-# The reST default role (used for this markup: `text`) to use for all documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-
-# -- Options for HTML output ---------------------------------------------------
-
-# The theme to use for HTML and HTML Help pages. See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further. For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents. If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar. Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it. The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'FreescaleCommunityBSPFAQdoc'
-
-
-# -- Options for LaTeX output --------------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title, author, documentclass [howto/manual]).
-latex_documents = [
- ('index', 'FreescaleCommunityBSPFAQ.tex', u'Freescale Community BSP FAQ Documentation',
- u'Freescale Community BSP Team', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output --------------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
- ('index', 'freescalecommunitybspfaq', u'Freescale Community BSP FAQ Documentation',
- [u'Freescale Community BSP Team'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output ------------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-# dir menu entry, description, category)
-texinfo_documents = [
- ('index', 'FreescaleCommunityBSPFAQ', u'Freescale Community BSP FAQ Documentation',
- u'Freescale Community BSP Team', 'FreescaleCommunityBSPFAQ', 'One line description of project.',
- 'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
diff --git a/FAQ/source/index.rst b/FAQ/source/index.rst
deleted file mode 100644
index 2ac2e4d..0000000
--- a/FAQ/source/index.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-.. Freescale Community BSP FAQ documentation master file, created by
- sphinx-quickstart on Mon Mar 10 16:54:03 2014.
- You can adapt this file completely to your liking, but it should at least
- contain the root `toctree` directive.
-
-Welcome to Freescale Community's BSP FAQ!
-=========================================
-
-
-.. toctree::
- :maxdepth: 2
-
- all
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
-
diff --git a/release-notes/source/bsp-scope.rst b/release-notes/source/bsp-scope.rst
index 97ca49d..9e73065 100644
--- a/release-notes/source/bsp-scope.rst
+++ b/release-notes/source/bsp-scope.rst
@@ -12,8 +12,8 @@ The scope of the |project_name| includes the meta layers:
provides distros support, images recipes, demo recipes, and packagegroups
used to easy the development with Yocto Project.
* `Documentation <https://github.com/Freescale/Documentation/tree/morty>`_:
- provides the source code for |project_name| Release Notes (RN), User Guide
- (UG) and Frequently Asked Questions (FAQ)
+ provides the source code for |project_name| Release Notes (RN) and User Guide
+ (UG).
License
=======
--
2.7.4
More information about the meta-freescale
mailing list