[meta-freescale] Updates to meta-fsl-arm (master) in 2016-05-16

Otavio Salvador otavio.salvador at gmail.com
Mon May 16 12:18:49 PDT 2016 

Hello,

I pushed following updates:

commit db7e805672104c1c6a5354d5148d09bc96374981 (yocto/master)
Author: Otavio Salvador <otavio at ossystems.com.br>
Date:   Wed May 11 18:29:02 2016 -0300

    linux-fslc: Update to 4.6-based fork
    
    This upgrades the Linux kernel to the upcoming 4.6 release. This
    includes some NXP related changes, which are target for 4.7. Those
    are:
    
    9be3cdc ARM: mx5: dts: Enable USB OTG on M53EVK
    fe805c7 ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
    e23d4ee ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
    bc9f274 ARM: dts: imx6ul-14x14-evk: Add audio support
    9214de9 ARM: dts: imx6qdl: Remove unneeded unit-addresses
    49d0bea clk: imx7d: fix ahb clock mux 1
    eda0002 ARM: dts: imx6: apalis: parallel lcd display support on ixora
    d9f2c8c ARM: dts: imx6sx-sdb: Add 198MHz operational point
    fa13784 ARM: dts: imx28-m28: Remove unneeded partition nodes
    67c050c ARM: dts: imx6ul-pico-hobbit: Add initial support
    41de276 ARM: dts: imx6: Do not hardcode the CLKO clock
    13d63a6 ARM: dts: imx6: Add dts for Embest MarS Board
    7d9db51 arm64: defconfig: enable freescale/nxp config options
    b9990f8 arm64: defconfig: enable 48-bit virtual addresses
    36e1773 arm64: defconfig: cleanup the defconfig
    3eb72e5 clk: imx: return correct frequency for Ethernet PLL
    4e744f4 ARM: dts: imx6: fix dtc warnings for ipu endpoints
    9c17803 ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
    b6e07a8 ARM: dts: imx6sx: Add 198MHz operating point
    c4cb697 ARM: dts: imx6ul: Fix operating points
    e593654 arm64: dts: ls2080a: fsl-mc dt node updates
    dc4a4c1 Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
    43efec0 ARM: dts: imx6q-ba16: use wdog external reset
    6a5ebd9 ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
    ecfff5f ARM: dts: imx6q-b850v3: Update display clock source
    82b8386 ARM: dts: imx6q-b850v3: Remove ldb panel
    b0b039a ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
    1d5276b ARM: dts: i.MX3x: add keypad port devicetree nodes
    db45d65 ARM: dts: imx35: restore existing used clock enumeration
    3af9f8f arm64: dts: ls1043a: add the DTS node for QSPI support
    e651264 Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
    5712e33 ARM: dts: ls1021a: add pix clock to DCU dts node
    8ad4cee ARM: dts: ls1021a: DSPI has 6 chip-selects
    8804a3f ARM: dts: ls1021a: Add gpio support for ls1021a platform
    f0f7b30 ARM: dts: imx6q-ba16: Remove unused vqmmc-supply
    cb8dacf ARM: dts: ls1021a: add SCFG MSI dts node
    4a26cfb ARM: dts: imx28: add alternative pinmuxing for mac0
    f407acf ARM: dts: imx6q-tbs2910: fix fec reset polarity
    aefe710 ARM: dts: vf610-zii-dev: Add ZII development board.
    2045498 ARM: dts: vfxxx: add missing reg properties
    95bd770 ARM: dts: vf-colibri: increase NAND clock speed
    cbd99f4 ARM: dts: vf-colibri: alias the primary FEC as ethernet0
    6216880 ARM: dts: imx6sx-sdb: Add SAI support
    b547d70 bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property
    e74a168 ARM: dts: imx6sx: Remove unused property
    4d9b42e ARM: dts: imx6sx: Fix SAI DMA index
    6f7a786 ARM: dts: imx6q-ba16: Disable pwm2 by default
    d28c0fc ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
    d2985a5 ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string
    815f031 ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
    4531f68 ARM: dts: imx6: add support for more Ka-Ro electronics modules
    a5c5a20 ARM: dts: imx6-tx6: enable support for rtscts on UARTs
    7686c67 ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp
    e806f1d6 ARM: dts: imx6-tx6: remove regulator bus
    5288f69 ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
    84757ea ARM: dts: imx6qdl-tx6: add mdio node for ethernet phy
    f756d41 ARM: dts: imx6-tx6: remove container node around pinctrl nodes
    72e625a ARM: dts: imx6-tx6: disable the spi node by default
    69751fa ARM: dts: imx6-tx6: cleanup; no functional change
    0f276c6 ARM: dts: imx6-tx6: Relicense the Ka-Ro DT files under GPLv2/X11
    2fb431b ARM: dts: imx25-pinfunc: remove SION for pins with an UART handshaking input mode
    7a1e22f ARM: dts: imx25-pinfunc: add all UART mux modes
    395dbf3 ARM: dts: imx: ba16: Add correct PCIe Tx Values
    b872157 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard
    290d3f9 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules
    2ce39b6 ARM: dts: vf610-colibri: enable display controller
    8411ccb ARM: dts: vf610: add display nodes
    4c36ca7 ARM: dts: imx: add Boundary Devices Nitrogen7 board
    b46656d ARM: dts: imx7d: add flexcan support
    d587538 ARM: dts: imx7d: add lcdif support
    b1334df arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
    8e403e3 arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
    9c3e8d5 arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
    d03665c Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
    0e01fa6 arm64: dts: ls1043a-rdb: add the DTS for DSPI support
    5139b339 ARM: multi_v5_defconfig: Enable recommended options for systemd
    c29da9c4 ARM: imx: always use TWD on IMX6Q
    dbcb3b1 clk: imx: vf610: fix whitespace in vf610-clock.h
    7115a09 clk: imx: vf610: add TCON ipg clock
    9241416 clk: imx: vf610: fix DCU clock tree
    be27a3e ARM: multi_v5_defconfig: Enable support for MX21/MX27
    4cedc0d ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
    7241dc3 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
    a60e2c2 ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
    e4ca550 clk: imx: add ckil clock for i.MX7
    118e922 clk: imx: vf610: add suspend/resume support
    189c8c1 clk: imx: vf610: add WKPU unit
    ef2f187 clk: imx: vf610: leave DDR clock on
    9a0e7b6 clk: imx: clk-gate2: allow custom gate configuration
    4ecea9b clk: imx6sx: Register SAI clocks as shared clocks
    abb9468 arm64: dts: add LS1043a-QDS board support
    d6505c6 Documentation: DT: Add entry for Freescale LS1043a-QDS board
    
    Change-Id: Ia4693a462743e532d412fb3213cfee1149496c8a
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit dc8efe437e3e27a6a02ce6c1237599e39152eac8
Author: Otavio Salvador <otavio at ossystems.com.br>
Date:   Wed May 11 17:45:11 2016 -0300

    u-boot-fslc: Update to 2016.05-based fork
    
    The U-Boot 2016.05 is close to release and it is time to upgrade. This
    includes following changes on top of upcoming release, which are Yocto
    Project related:
    
    0fcd279 wandboard: Drop revision specific DeviceTree support
    0ab586a mx6sabresd: Enable video interfaces in bootargs
    5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
    91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC
    968d872 embestmx6boards: Change default bootenv configuration
    3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added
    df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added
    
    The following changes are included here, and queued for U-Boot 2016.07
    release:
    
    a858d98 ARM: mx6: Enable MMC and SATA extfs boot support
    70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE
    5054e50 SPL: Let spl_parse_image_header() return value
    bf9c724 imx: imx-common: print i.MX 7 SoC names consistently
    dd6d9db imx: imx7d: fix ahb clock mux 1
    24f4bb6 imx: iomux-v3: fix UART input selects
    83609b3 ARM: mx6: Enable STDIO deregistering on Novena
    0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5
    ffae8c1 imx: tools: imximage: fix CLR bit command
    
    Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

More information about the meta-freescale mailing list