[meta-freescale] Updates to meta-fsl-arm (master) in 2016-07-22

[Otavio Salvador]

Hello,

I pushed following updates:

commit 79f02501a90c1f690660db400c20fb1ba561f378 (HEAD -> pending, yocto/master-next, yocto/master)
Author: Fabio Berton <fabio.berton at ossystems.com.br>
Date:   Fri Jul 22 11:03:41 2016 -0300

    linux-fslc-imx: Bump revision to 0c0844f
    
    This includes following change:
    
      - 0c0844f 4.1.28 Fix bad backport of 8f182270dfec "mm/swap.c: flush lru
        pvecs on compound page arrival"
    
    Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit 5a019aafd0ddafdd996518d748958ddf7ebc2dff
Author: Fabio Berton <fabio.berton at ossystems.com.br>
Date:   Thu Jul 21 17:25:42 2016 -0300

    u-boot-fslc: Bump revision to 9da4a42
    
    This includes following changes:
    
      - 9da4a42 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
      - 7be8ff4 serial_mxc: Remove unconditional DCE setting
      - 6dec211 mx6: clock: Fix the logic for reading axi_alt_sel
      - 68f2c3e Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite"
      - 2fd99ea imx_watchdog: add weak attribute to reset_cpu function
      - c782384 mx7_common: use Kconfig for ARMv7 non-secure mode
      - b8cc70e mx7_common: Put display board info config into board file
      - 72a9967 mx7: set soc environment according to exact SoC type
      - ff3ecc4 usb: ehci-mx6: introduce config for high active power pin
      - 97488b5 usb: ehci-mx6: configure power polarity in usb_power_config
      - ce0c796 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
      - e22ac58 dm: imx: serial: Support DTE mode when using driver model
      - 65db95b warp7: Remove CONFIG_BOOTDELAY variable
      - 1231d04 ARM: configs: cm_fx6: add mtd support
      - 14619b5 ARM: board: cm_fx6: fixup mtd partitions in the fdt
      - 9fa3af0 fdt_support: define stub for fdt_fixup_mtdparts
      - f1a2b56 ARM: configs: cm_fx6: improve default environment
      - d1e28f0 pico-imx6ul: Add PMIC support
      - 292806e wandboard: move environment partition farther from u-boot.img
      - 8b5df31 Revert conversion for config_distro_bootcmd.h
      - 9222180 Merge pull request #11 from Kynetics/2016.07+fslc
      - 1207b97 warp: Change default bootenv configuratio
    
    Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit f5708ec4e8a87d9733613ba773078ffe7de89d09
Author: Fabio Berton <fabio.berton at ossystems.com.br>
Date:   Tue Jul 19 09:18:19 2016 -0300

    imx-kobs: Allow kobs-ng to flash the SPL on the 4.x kernel
    
    Add function to check if kernel support raw_mode and fix function that
    calculates the geometry based on known info from the mtd partitionmtd
    geometry.
    
    These patches were copied from:
    https://github.com/Gateworks/openwrt/commit/379e87df4fb67198fe900ffe2a394e69fbd47801
    
    Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750