[meta-freescale] [meta-freescale-layer][PATCH 1/5] remove not supported e500v2 machines
Ting Liu
ting.liu at nxp.com
Thu Jul 14 09:23:39 PDT 2016
Hello Bob,
p1010rdb is removed in this patch. Please add it back with your update when needed.
Sorry for the inconvenience.
-Ting
> -----Original Message-----
> From: ting.liu at nxp.com [mailto:ting.liu at nxp.com]
> Sent: Friday, July 15, 2016 12:11 AM
> To: meta-freescale at yoctoproject.org
> Cc: Zhenhua Luo <zhenhua.luo at nxp.com>; Ting Liu <ting.liu at nxp.com>
> Subject: [meta-freescale-layer][PATCH 1/5] remove not supported e500v2
> machines
>
> From: Ting Liu <ting.liu at freescale.com>
>
> Remove the below machines which are not supported/tested:
> bsc9131rdb, bsc9132qds, p1010rdb, p1020rdb, p1021rdb, p1022ds p1023rdb,
> p1025twr, p2020rdb
>
> Signed-off-by: Ting Liu <ting.liu at nxp.com>
> ---
> conf/machine/bsc9131rdb.conf | 25 -------------------------
> conf/machine/bsc9132qds.conf | 41 -----------------------------------------
> conf/machine/p1010rdb.conf | 38 --------------------------------------
> conf/machine/p1020rdb.conf | 28 ----------------------------
> conf/machine/p1021rdb.conf | 35 -----------------------------------
> conf/machine/p1022ds.conf | 42 ------------------------------------------
> conf/machine/p1023rdb.conf | 26 --------------------------
> conf/machine/p1025twr.conf | 28 ----------------------------
> conf/machine/p2020rdb.conf | 32 --------------------------------
> 9 files changed, 295 deletions(-)
> delete mode 100644 conf/machine/bsc9131rdb.conf delete mode 100644
> conf/machine/bsc9132qds.conf delete mode 100644
> conf/machine/p1010rdb.conf delete mode 100644
> conf/machine/p1020rdb.conf delete mode 100644
> conf/machine/p1021rdb.conf delete mode 100644
> conf/machine/p1022ds.conf delete mode 100644
> conf/machine/p1023rdb.conf delete mode 100644
> conf/machine/p1025twr.conf delete mode 100644
> conf/machine/p2020rdb.conf
>
> diff --git a/conf/machine/bsc9131rdb.conf b/conf/machine/bsc9131rdb.conf
> deleted file mode 100644 index aad6dd9..0000000
> --- a/conf/machine/bsc9131rdb.conf
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Freescale BSC9131RDB
> -#@SOC: bsc9131
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ Qonverge
> BSC9131
> -# Reference Design Board with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "bsc9131"
> -
> -UBOOT_CONFIG ??= "nand nand-sysclk100 spi spi-sysclk100"
> -UBOOT_CONFIG[nand] = "BSC9131RDB_NAND_config"
> -UBOOT_CONFIG[nand-sysclk100] =
> "BSC9131RDB_NAND_SYSCLK100_config"
> -UBOOT_CONFIG[spi] = "BSC9131RDB_SPIFLASH_config"
> -UBOOT_CONFIG[spi-sysclk100] =
> "BSC9131RDB_SPIFLASH_SYSCLK100_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "bsc9131rdb.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/85xx/bsc913x_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x10000"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/bsc9132qds.conf b/conf/machine/bsc9132qds.conf
> deleted file mode 100644 index 108b497..0000000
> --- a/conf/machine/bsc9132qds.conf
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Freescale BSC9132QDS
> -#@SOC: bsc9132
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ Qonverge
> BSC9132
> -# Qonverge Development System with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "bsc9132"
> -
> -UBOOT_CONFIG ??= "nand-ddrclk133 nand-ddrclk100 nor-ddrclk100 nor-
> ddrclk133 \
> -sdcard-ddrclk100 sdcard-ddrclk133 spi-ddrclk100 spi-ddrclk133 \ -nand-
> ddrclk100-secure nand-ddrclk133-secure nor-ddrclk100-secure \ -nor-
> ddrclk133-secure sdcard-ddrclk100-secure sdcard-ddrclk133-secure \ -spi-
> ddrclk100-secure spi-ddrclk133-secure"
> -UBOOT_CONFIG[nand-ddrclk133] =
> "BSC9132QDS_NAND_DDRCLK133_config"
> -UBOOT_CONFIG[nand-ddrclk100] =
> "BSC9132QDS_NAND_DDRCLK100_config"
> -UBOOT_CONFIG[nor-ddrclk100] = "BSC9132QDS_NOR_DDRCLK100_config"
> -UBOOT_CONFIG[nor-ddrclk133] = "BSC9132QDS_NOR_DDRCLK133_config"
> -UBOOT_CONFIG[sdcard-ddrclk100] =
> "BSC9132QDS_SDCARD_DDRCLK100_config"
> -UBOOT_CONFIG[sdcard-ddrclk133] =
> "BSC9132QDS_SDCARD_DDRCLK133_config"
> -UBOOT_CONFIG[spi-ddrclk100] =
> "BSC9132QDS_SPIFLASH_DDRCLK100_config"
> -UBOOT_CONFIG[spi-ddrclk133] =
> "BSC9132QDS_SPIFLASH_DDRCLK133_config"
> -UBOOT_CONFIG[nand-ddrclk100-secure] =
> "BSC9132QDS_NAND_DDRCLK100_SECURE_config"
> -UBOOT_CONFIG[nand-ddrclk133-secure] =
> "BSC9132QDS_NAND_DDRCLK133_SECURE_config"
> -UBOOT_CONFIG[nor-ddrclk100-secure] =
> "BSC9132QDS_NOR_DDRCLK100_SECURE_config"
> -UBOOT_CONFIG[nor-ddrclk133-secure] =
> "BSC9132QDS_NOR_DDRCLK133_SECURE_config"
> -UBOOT_CONFIG[sdcard-ddrclk100-secure] =
> "BSC9132QDS_SDCARD_DDRCLK100_SECURE_config"
> -UBOOT_CONFIG[sdcard-ddrclk133-secure] =
> "BSC9132QDS_SDCARD_DDRCLK133_SECURE_config"
> -UBOOT_CONFIG[spi-ddrclk100-secure] =
> "BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_config"
> -UBOOT_CONFIG[spi-ddrclk133-secure] =
> "BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "bsc9132qds.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/85xx/bsc913x_smp_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x10000"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1010rdb.conf b/conf/machine/p1010rdb.conf
> deleted file mode 100644 index eddd665..0000000
> --- a/conf/machine/p1010rdb.conf
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -#@TYPE: Machine
> -#@Name: Freescale P1010RDB
> -#@SOC: p1010
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1010
> Reference
> -# Design Board with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1010"
> -BOOTFORMAT_CONFIG = "config_sram_p1010rdb.dat"
> -
> -UBOOT_CONFIG ??= "nor nand spi 36bit-nor 36bit-nand 36bit-spi \ -36bit-
> nand-secboot 36bit-nor-secboot 36bit-spi-secboot nand-secboot \ -nor-
> secboot spi-secboot"
> -UBOOT_CONFIG[nor] = "P1010RDB-PB_NOR_config"
> -UBOOT_CONFIG[nand] = "P1010RDB-PB_NAND_config"
> -UBOOT_CONFIG[spi] = "P1010RDB-PB_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nor] = "P1010RDB-PB_36BIT_NOR_config"
> -UBOOT_CONFIG[36bit-nand] = "P1010RDB-PB_36BIT_NAND_config"
> -UBOOT_CONFIG[36bit-spi] = "P1010RDB-PB_36BIT_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nand-secboot] = "P1010RDB-
> PB_36BIT_NAND_SECBOOT_config"
> -UBOOT_CONFIG[36bit-nor-secboot] = "P1010RDB-
> PB_36BIT_NOR_SECBOOT_config"
> -UBOOT_CONFIG[36bit-spi-secboot] = "P1010RDB-
> PB_36BIT_SPIFLASH_SECBOOT_config"
> -UBOOT_CONFIG[nand-secboot] = "P1010RDB-PB_NAND_SECBOOT_config"
> -UBOOT_CONFIG[nor-secboot] = "P1010RDB-PB_NOR_SECBOOT_config"
> -UBOOT_CONFIG[spi-secboot] = "P1010RDB-
> PB_SPIFLASH_SECBOOT_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1010rdb-pa.dtb p1010rdb-pb.dtb"
> -KERNEL_DEFCONFIG ?= "${S}/arch/powerpc/configs/mpc85xx_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1020rdb.conf b/conf/machine/p1020rdb.conf
> deleted file mode 100644 index 2107224..0000000
> --- a/conf/machine/p1020rdb.conf
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Freescale P1020RDB
> -#@SOC: p1020
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1020
> Reference
> -# Design Board, revD with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1020"
> -BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
> -
> -UBOOT_CONFIG ??= "nor nand sdcard spi"
> -UBOOT_CONFIG[nor] = "P1020RDB-PD_config"
> -UBOOT_CONFIG[nand] = "P1020RDB-PD_NAND_config"
> -UBOOT_CONFIG[sdcard] = "P1020RDB-PD_SDCARD_config"
> -UBOOT_CONFIG[spi] = "P1020RDB-PD_SPIFLASH_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1020rdb-pd_32b.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1021rdb.conf b/conf/machine/p1021rdb.conf
> deleted file mode 100644 index 57109a2..0000000
> --- a/conf/machine/p1021rdb.conf
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -#@TYPE: Machine
> -#@Name: Freescale P1021RDB
> -#@SOC: p1021
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1021
> Reference
> -# Design Board, revC with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1021"
> -BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
> -
> -UBOOT_CONFIG ??= "nor nand sdcard spi 36bit-nor 36bit-spi 36bit-nand
> 36bit-sdcard"
> -UBOOT_CONFIG[nor] = "P1021RDB-PC_config"
> -UBOOT_CONFIG[nand] = "P1021RDB-PC_NAND_config"
> -UBOOT_CONFIG[sdcard] = "P1021RDB-PC_SDCARD_config"
> -UBOOT_CONFIG[spi] = "P1021RDB-PC_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nor] = "P1021RDB-PC_36BIT_config"
> -UBOOT_CONFIG[36bit-spi] = "P1021RDB-PC_36BIT_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nand] = "P1021RDB-PC_36BIT_NAND_config"
> -UBOOT_CONFIG[36bit-sdcard] = "P1021RDB-PC_36BIT_SDCARD_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1021rdb-pc_32b.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -QE_UCODE ?= "fsl_qe_ucode_1021_10_A.bin"
> -
> -EXTRA_IMAGEDEPENDS += "qe-ucode"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1022ds.conf b/conf/machine/p1022ds.conf
> deleted file mode 100644 index 41b8835..0000000
> --- a/conf/machine/p1022ds.conf
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Freescale P1022DS
> -#@SOC: p1022
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1022
> Development
> -# System, revB with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1022"
> -BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
> -
> -UBOOT_CONFIG ??= "nor nand spi sdcard 36bit-nor 36bit-spi 36bit-nand
> 36bit-sdcard"
> -UBOOT_CONFIG[nor] = "P1022DS_config"
> -UBOOT_CONFIG[nand] = "P1022DS_NAND_config"
> -UBOOT_CONFIG[spi] = "P1022DS_SPIFLASH_config"
> -UBOOT_CONFIG[sdcard] = "P1022DS_SDCARD_config"
> -UBOOT_CONFIG[36bit-nor] = "P1022DS_36BIT_config"
> -UBOOT_CONFIG[36bit-spi] = "P1022DS_36BIT_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nand] = "P1022DS_36BIT_NAND_config"
> -UBOOT_CONFIG[36bit-sdcard] = "P1022DS_36BIT_SDCARD_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1022ds_32b.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
> -
> -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
> -
> -XSERVER = " \
> - xserver-xorg \
> - xf86-input-evdev \
> - xf86-input-mouse \
> - xf86-input-keyboard \
> - xf86-video-fbdev \
> -"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1023rdb.conf b/conf/machine/p1023rdb.conf
> deleted file mode 100644 index c6b36ba..0000000
> --- a/conf/machine/p1023rdb.conf
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: Freescale P1023RDB
> -#@SOC: p1023
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1023
> Reference
> -# Design Board, revA with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1023"
> -
> -UBOOT_CONFIG ??= "nor"
> -UBOOT_CONFIG[nor] = "P1023RDB_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1023rdb.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/85xx/p1023_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x10000"
> -
> -EXTRA_IMAGEDEPENDS += "fm-ucode"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p1025twr.conf b/conf/machine/p1025twr.conf
> deleted file mode 100644 index 783fa42..0000000
> --- a/conf/machine/p1025twr.conf
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -#@TYPE: Machine
> -#@Name: Freescale P1025TWR
> -#@SOC: p1025
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P1025 MPU
> Tower
> -# System Module with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p1025"
> -BOOTFORMAT_CONFIG = "config_ddr3_1gb_p1_p2_rdb_pc_667M.dat"
> -
> -UBOOT_CONFIG ??= "nor"
> -UBOOT_CONFIG[nor] = "TWR-P1025_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p1025twr_32b.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -QE_UCODE ?= "fsl_qe_ucode_1021_10_A.bin"
> -
> -EXTRA_IMAGEDEPENDS += "qe-ucode"
> -
> -USE_VT ?= "0"
> diff --git a/conf/machine/p2020rdb.conf b/conf/machine/p2020rdb.conf
> deleted file mode 100644 index 14e030b..0000000
> --- a/conf/machine/p2020rdb.conf
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -#@TYPE: Machine
> -#@Name: Freescale P2020RDB
> -#@SOC: p2020
> -#@DESCRIPTION: Machine configuration for Freescale QorIQ P2020
> Reference
> -# Design Board with ppce500v2 core
> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> -
> -require conf/machine/include/e500v2.inc
> -
> -SOC_FAMILY = "p2020"
> -BOOTFORMAT_CONFIG = "config_sram_p1022ds.dat"
> -
> -UBOOT_CONFIG ??= "nor nand sdcard spi 36bit-nor 36bit-spi 36bit-nand
> 36bit-sdcard"
> -UBOOT_CONFIG[nor] = "P2020RDB-PC_config"
> -UBOOT_CONFIG[nand] = "P2020RDB-PC_NAND_config"
> -UBOOT_CONFIG[sdcard] = "P2020RDB-PC_SDCARD_config"
> -UBOOT_CONFIG[spi] = "P2020RDB-PC_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nor] = "P2020RDB-PC_36BIT_config"
> -UBOOT_CONFIG[36bit-spi] = "P2020RDB-PC_36BIT_SPIFLASH_config"
> -UBOOT_CONFIG[36bit-nand] = "P2020RDB-PC_36BIT_NAND_config"
> -UBOOT_CONFIG[36bit-sdcard] = "P2020RDB-PC_36BIT_SDCARD_config"
> -
> -UBOOT_SOURCE_NAND = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SPI = "u-boot-with-spl.bin"
> -UBOOT_SOURCE_SD = "u-boot-with-spl.bin"
> -
> -KERNEL_DEVICETREE ?= "p2020rdb-pc_32b.dtb"
> -KERNEL_DEFCONFIG ?=
> "${S}/arch/powerpc/configs/mpc85xx_smp_defconfig"
> -
> -JFFS2_ERASEBLOCK = "0x20000"
> -
> -USE_VT ?= "0"
> --
> 1.9.2
More information about the meta-freescale
mailing list