[meta-freescale] [PATCH 0/3] Vybrid (vf610) Linux 4.4 changes

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Hi Otavio,

This patchset bumps the Linux kernel to 4.4 and makes use of the
new DCU DRM driver. I successfully booted an image on the Tower,
however I do not have the display hence could not visually verify
that the DCU driver works. I previously tested the driver on our
Toradex Colibri VF61 module, where it worked successfully, hence
I assume it should work on the Tower too. The DRM sysfs files
report the correct resolution (for the TWR-LCD-RGB module):

# cat /sys/class/drm/card0-LVDS-1/*
cat: read error: Is a directory
On
enabled
480x272
cat: read error: Is a directory
connected
cat: read error: Is a directory

Stefan Agner (3):
  linux-fslc (4.4): Introduce Linux 4.4 kernel for Vybrid
  imx-base.inc: use modesetting driver for Vybrid
  xserver-xf86-config: use modesetting for Vybrid

 conf/machine/include/imx-base.inc                       |  1 +
 .../xorg-xserver/xserver-xf86-config/vf/xorg.conf       | 12 ++++++++++++
 recipes-kernel/linux/linux-fslc/defconfig               |  1 +
 recipes-kernel/linux/linux-fslc/vf/defconfig            | 10 +++-------
 recipes-kernel/linux/linux-fslc_4.4.bb                  | 17 +++++++++++++++++
 5 files changed, 34 insertions(+), 7 deletions(-)
 create mode 100644 recipes-graphics/xorg-xserver/xserver-xf86-config/vf/xorg.conf
 create mode 100644 recipes-kernel/linux/linux-fslc_4.4.bb

-- 
2.7.0