[meta-freescale] QtWebEngine with Qt 5.4.2 and SMARC sAMX6i

[Johannes Pointner]

I don't know what image you are using, but I would think that you have
to build a system like the core-image-weston and set wayland as qt
backend for the build. Of course you use your own image but then you
have to add the depencies for wayland and weston.

2016-01-04 17:46 GMT+01:00 Andreas Enbacka <andreas.enbacka at gasera.fi>:
> I am using Eglfs backend. What is easiest way to switch to wayland backend instead
>
> Regards,
> Andreas Enbacka
>
>> 4 jan. 2016 kl. 18:24 skrev Johannes Pointner <h4nn35.work at gmail.com>:
>>
>> Which backend are you using? What I experienced with i.MX6 is that the
>> qtwebengine wasn't working with the eglfs backend, but with wayland it
>> was working fine. I have to admit I used Qt 5.5 and kernel 3.14 (from
>> Freescale).
>>
>> 2016-01-04 13:30 GMT+01:00 Andreas Enbacka <andreas.enbacka at gasera.fi>:
>>> Hello,
>>>
>>>
>>>
>>> I have been able to get Qt 5.4.2  to work with Yocto 1.8 and kernel 3.10.53
>>> for Kontron SMARC  sAMX6i. In general, it seems to work quite well, however
>>> I have issues with the QtWebEngine module. With QtWebKit I am able to get
>>> web pages rendered to display, however when I tried to use QtWebEngine (both
>>> using QtWebEngineWidgets and QML plugins) I only get a black screen instead
>>> of the web content.  Does anyone have information whether QtWebEngine should
>>> work ok or not with Qt 5.4.2, or is some particular configuration etc.
>>> required?
>>>
>>>
>>>
>>> Best regards,
>>>
>>> Andreas Enbacka
>>>
>>>
>>>
>>>
>>> --
>>> _______________________________________________
>>> meta-freescale mailing list
>>> meta-freescale at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>