[meta-freescale] Updates to meta-fsl-arm (krogoth) in 2016-08-16
Otavio Salvador
otavio.salvador at gmail.com
Tue Aug 16 06:39:45 PDT 2016
Hello,
I pushed following updates:
commit b9aa44d8380ec6f501201bd3594be6481f9301e7 (HEAD -> krogoth, yocto/krogoth)
Author: Breno Lima <breno.lima at nxp.com>
Date: Mon Aug 15 13:41:59 2016 -0300
u-boot-fslc: Bump to revision 328e7d6
It includes the following change:
328e7d6: warp: Fix RAM size runtime detection
Signed-off-by: Breno Lima <breno.lima at nxp.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 5d540f87a3df183a2900c24e0a7bfe56ba079eb0
Author: Breno Lima <breno.lima at nxp.com>
Date: Fri Aug 12 09:54:43 2016 -0300
linux-fslc-imx: Replace MPL3115 driver
There are currently two driver implementations for the MPL3115:
- drivers/input/misc/mpl3115.c (from NXP kernel)
- drivers/iio/pressure/mpl3115.c (from upstream kernel).
Use the CONFIG_MPL3115 instead of CONFIG_INPUT_MPL3115 because this driver
uses the Industrial I/O framework, which is the preferred and standard
subsystem for sensors.
The data from this sensor can be read by using the following commands
on a warp7 board:
cat /sys/bus/iio/devices/iio:device0/in_pressure_raw
cat /sys/bus/iio/devices/iio:device0/in_temp_raw
Signed-off-by: Breno Lima <breno.lima at nxp.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 5406e950292b40e96e1b0ef5fa13614a4bb3f437
Author: Daiane Angolini <daiane.angolini at nxp.com>
Date: Wed Aug 10 17:35:48 2016 -0300
firmware-imx: Rework recipe to use base_libdir
Rework recipe to use ${base_libdir} instead of pointing direct to the "lib/" path.
Signed-off-by: Daiane Angolini <daiane.angolini at nxp.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list