[meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir,

Finally I got a "do_rootfs " error, and I checked the log file, it says missing the "qt3d-tools", and I added one line on the local.conf: PACKAGECONFIG_DISTRO_pn-qtbase="accessibility".
Now I am doing "bitbake fsl-image-multimedia-full" again.
Do you have any other document about yocto and qt5, because it is really quite difficult for me to understand everything about yocto, freescale and qt5.

Thank you very much!
Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Dear Sir,

Just now, I deleted "alsa-utils-alsaconf" in my local.conf, and now the "bitbake fsl-image-multimedia-full" can run, I don't know whether it is good or not...

Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dear Sir,

I see I should not use fsl-image-qt5, but use "bitbake fsl-image-multimedia-full". First I had "gst-fsl-plugin" error,
but now I have fixed it (referred to the fsl release note 2.0, updated the packagegroup names in the "IMAGE_INSTALL_append").
But there is one error "alsa-ultils-alsaconf is unbuildable" when I use "bitbake fsl-image-multimedia-full", can you help me?

Thanks
Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yesterday's email:

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!

Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou at staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月17日 19:54
To: Otavio Salvador
Cc: meta-freescale at yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador at ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou at staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750