[meta-freescale] [meta-fsl-arm-extra][PATCH] imx7d-warp7: Add machine definition

[Daiane Angolini]

The WaRP7 Board is a Wearable Reference Platform. The board features:

 - i.MX 7Solo applications processor (Cortex-A7/Cortex–M4)
 - 8GB eMMC 5.0 and 4Gb LPDDR3
 - WiFi, Bluetooth, BLE, USB-OTG, NFC
 - I/F Camera, MIPI Display, Audio
 - Accelerometer, Barometer, Gyroscope
 - PMIC, Battery charger

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

The machine configuration file used to include Yocto Project support to the
board is a consolidation work only.

It only reflects the work done in Linux kernel, U-Boot and FSL Community BSP,
where the hard work is actually done.

Signed-off-by: Daiane Angolini <daiane.angolini at nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
Signed-off-by: Andres Lemos <andres.lemos at nxp.com>
---
 conf/machine/imx7d-warp7.conf | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 conf/machine/imx7d-warp7.conf

diff --git a/conf/machine/imx7d-warp7.conf b/conf/machine/imx7d-warp7.conf
new file mode 100644
index 0000000..cd066ac
--- /dev/null
+++ b/conf/machine/imx7d-warp7.conf
@@ -0,0 +1,19 @@
+#@TYPE: Machine
+#@NAME: WaRP7
+#@SOC: i.MX7S
+#@DESCRIPTION: Machine configuration for i.MX7S WaRP board.
+#@MAINTAINER: Daiane Angolini <daiane.angolini at nxp.com>
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa7.inc
+
+MACHINE_FEATURES += " wifi bluetooth"
+
+SOC_FAMILY = "mx7:mx7d"
+
+KERNEL_DEVICETREE = "imx7d-warp.dtb"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-fslc-imx"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd] = "warp7_config,sdcard"
-- 
2.5.0