[meta-freescale] [meta-fsl-arm PATCH v3 2/5] imx-base.inc, mxs-base.inc: Stop generating tar.bz2 image tarball by default

[Otavio Salvador]

The tar.bz2 is useful for people using NFS or generating the SD card
image byhand, those can enable this in the board file or in the
local.conf when needed. By default the SD card image should be the
only image built as it is the most commonly used one for initial
development.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---

Changes in v3:
- Fix spelling (Fabio)

Changes in v2: None

 conf/machine/include/imx-base.inc | 2 +-
 conf/machine/include/mxs-base.inc | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/conf/machine/include/imx-base.inc b/conf/machine/include/imx-base.inc
index e0a67c7..799067d 100644
--- a/conf/machine/include/imx-base.inc
+++ b/conf/machine/include/imx-base.inc
@@ -139,7 +139,7 @@ IMX_DEFAULT_KERNEL_mx6ul = "linux-imx"
 PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}"
 
 SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
-IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard"
+IMAGE_FSTYPES ?= "ext3 sdcard"
 
 SERIAL_CONSOLE = "115200 ttymxc0"
 
diff --git a/conf/machine/include/mxs-base.inc b/conf/machine/include/mxs-base.inc
index b32e926..38450be 100644
--- a/conf/machine/include/mxs-base.inc
+++ b/conf/machine/include/mxs-base.inc
@@ -36,7 +36,7 @@ SERIAL_CONSOLE = "115200 ttyAMA0"
 KERNEL_IMAGETYPE = "zImage"
 
 SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
-IMAGE_FSTYPES ?= "tar.bz2 ext3 uboot.mxsboot-sdcard sdcard"
+IMAGE_FSTYPES ?= "ext3 uboot.mxsboot-sdcard sdcard"
 
 # Add the ability to specify _imx machines
 MACHINEOVERRIDES =. "imx:"
-- 
2.5.3