[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2015-11-23

[Otavio Salvador]

Hello,

I pushed following updates:

commit e71cf440ddfa83e588665debcd9899dad6e38d9b (HEAD -> pending, ossystems/master, m/master, fslc/master)
Author: Oliver Wendt <OW at karo-electronics.de>
Date:   Wed Nov 18 17:54:21 2015 +0100

    tx6qus: add machine configuration for TX6Q/U/S COM
    
    This patch provides initial machine configs for TX6 series COM to this fsl
    yocto meta layer to produce, based on the respective enumeration (as iterated
    in below table) of the TX6 COM, it can be used to provide images for U-Boot
    and Linux kernel (and by extension a rootfs).
    
     MACHINE= |  TX6-COM  | Basic information (SOC @ Freq, RAM, NVM, DSP-IF)
    ----------+-----------+-------------------------------------------------
    tx6s-8034 | TX6S-8034 |	i.MX6S  @ 800 MHz, 256 MiB, 128 MiB NAND, LCD
    tx6s-8035 | TX6S-8035 |	i.MX6S  @ 800 MHz, 512 MiB,   4 GiB eMMC, LCD
    ----------+-----------+-------------------------------------------------
    tx6u-80x0 | TX6U-8030 |	i.MX6DL @ 800 MHz, 512 MiB, 128 MiB NAND, LCD
    tx6u-8033 | TX6U-8033 |	i.MX6DL @ 800 MHz,   1 GiB,   4 GiB eMMC, LCD
    tx6u-81x0 | TX6U-8130 |	i.MX6DL @ 800 MHz,   1 GiB, 128 MiB NAND, LVDS
    ----------+-----------+-------------------------------------------------
    tx6q-10x0 | TX6Q-1030 |	i.MX6Q  @   1 GHz,   1 GiB, 128 MiB NAND, LCD
    tx6q-11x0 | TX6Q-1110 |	i.MX6Q  @   1 GHz,   1 GiB, 128 MiB NAND, LVDS
    
    Signed-off-by: Oliver Wendt <OW at karo-electronics.de>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit d0df31ef61b052008234c1802dc6f3cf334c9c3e
Author: Oliver Wendt <OW at karo-electronics.de>
Date:   Wed Nov 18 17:54:20 2015 +0100

    linux-karo: add recipe for Ka-Ro Linux kernel v3.16 (based) for TX6Q/U/S COM
    
    This receipe adds the mainline based Ka-Ro Linux kernel for TX6 series COM to
    this fsl yocto meta layer and includes changes such as the following:
    
      - Linux kernel upstream base (mainline tag): v3.16
      - updated GPU driver to work with Freescale's yocto 3.10.53_1.1.0-ga Release
      - make sure the display flags (pixecl clock polarity, data enable polarity)
        are conveyed to the ipu driver
      - DTB: move LCD related pinctrl properties to 'display' node
      - fix cyclic eth0 Link Up - Link Down bug
      - Changes made to v3.16 went upstream
    
    Full list of changes see the git repository as given in patch.
    
    Signed-off-by: Oliver Wendt <OW at karo-electronics.de>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit d77b4157799a716d1ac8fbbdb2275784370e7eb1
Author: Oliver Wendt <OW at karo-electronics.de>
Date:   Wed Nov 18 17:54:19 2015 +0100

    u-boot-karo: add recipe for Ka-Ro U-Boot v2015.10-rc2 (based) for TX6Q/U/S COM
    
    This receipe adds the U-Boot fork for the Ka-Ro TX6 series COM to this fsl yocto
    meta layer and includes changes such as the following:
    
      - U-Boot upstream base: v2015.10-rc2
      - no IMX image format: DCD is compiled and integrated at compile time
      - Secure Boot support for TX6
      - set default video_mode depending on LVDS/LCD module variant
      - get LCD backlight polarity from DT
      - changed CONFIG_SYS_TEXT_BASE from 0x2780000 to 0x10100000 to
        accomodate boards with less than 256MiB memory
      - make shutdown temperature configurable
      - use IRAM_BASE_ADDR rather than 0xbadc0de as exception vector
        address
    
    Full list of changes see the git repository as given in patch.
    
    Signed-off-by: Oliver Wendt <OW at karo-electronics.de>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750