[meta-freescale] [meta-fsl-extra][PATCH v2 0/3] Add Nitrogen6QP_MAX support

[Gary Bisson]

Hi all,

This series adds the support for our Nitrogen6QP_MAX platform:
https://boundarydevices.com/product/nitrogen6_max-i-mx6-quad-plus-4gb-ddr3/

However, in order not to affect other Boundary platforms, this new 3.14.38-6qp
kernel will not be used by default.

Therefore, to build an image for Nitrogen6QP_MAX, one must use the nitrogen6x
machine and modify the local.conf to add the following:
PREFERRED_VERSION_linux-boundary = "3.14.38-6qp"

This kernel recipe will be deleted once Freescale will release a consolidated
version for all the platforms.

Changelog:
v1->v2:
- remove nitrogen6qp_max machine
- add DEFAULT_PREFERENCE = "-1" to 3.14.38 kernel recipe
- change compatible machine for 3.14.38 recipe (nitrogen6x only)

Regards,
Gary

Gary Bisson (3):
  linux-boundary: add 3.14.38-6qp-ga kernel
  u-boot-boundary: bump revision for 6QP support
  u-boot-script-boundary: bump revision for 6QP support

 recipes-bsp/u-boot/u-boot-boundary_git.bb          |   2 +-
 recipes-bsp/u-boot/u-boot-script-boundary_git.bb   |   2 +-
 .../linux/linux-boundary-3.14.38-6qp/defconfig     | 406 +++++++++++++++++++++
 recipes-kernel/linux/linux-boundary_3.14.38-6qp.bb |  19 +
 4 files changed, 427 insertions(+), 2 deletions(-)
 create mode 100644 recipes-kernel/linux/linux-boundary-3.14.38-6qp/defconfig
 create mode 100644 recipes-kernel/linux/linux-boundary_3.14.38-6qp.bb

-- 
2.6.2