[meta-freescale] P3041DS: SATA SCSI disk gives errors

[Luo Zhenhua]

Hi Siva, 

Board: P3041DS, Sys ID: 0x20, Sys Ver: 0x01, FPGA Ver: 0x02, vBank: 0
U-Boot 2014.07QorIQ-SDK-V1.7+g659b6a2 (Dec 13 2014 - 14:05:10)

SATA device 1: Model: Hitachi HDS721616PLA380 Firm: P22OA70A Ser#:       PVB300Z20142YF
            Type: Hard Disk
            Capacity: 157066.8 MB = 153.3 GB (321672960 x 512)


Best Regards,

Zhenhua

> -----Original Message-----
> From: Siva Borra [mailto:siva.borra at enea.com]
> Sent: Monday, May 25, 2015 8:18 PM
> To: Luo Zhenhua-B19537; meta-freescale at yoctoproject.org
> Cc: Adrian Dudau
> Subject: Re: [meta-freescale] P3041DS: SATA SCSI disk gives errors
> 
> Hi Luo,
> 
> Thank you. Can you share the board revision?
> 
> The board revision I have tried is :
> Board: P3041DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 0 U-Boot
> 2011.06-rc2 (Jun 09 2011 - 20:15:17) And the HDD used is:
> 
> SATA device 1: Model: Hitachi HDS721050CLA362 Firm: JP2OA3MA Ser#:
> JP1511HJ3TTD0K
>              Type: Hard Disk
>              Supports 48-bit addressing
>              Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
> 
> Regards,
> Siva Borra.
> 
> On 2015-05-25 12:55, Luo Zhenhua wrote:
> > Hello Siva,
> >
> > I tried the dizzy branch to build images and boot p3041ds board (uImage, dtb,
> core-image-mininal.rootfs.ext2.gz.u-boot), the SATA is launched normally.
> >
> > Layers commit:
> > Poky - dizzy:9c4ff467f66428488b1cd9798066a8cb5d6b4c3b
> > meta-openembedded - dizzy:5b6f39ce325d490fc382d5d59c5b8b9d5fa38b38
> > meta-fsl-ppc - dizzy:5eeeb3ad74b72d904f805bc6e248e93e722b45c4
> >
> > The full boot log is attached.
> >
> >
> > Best Regards,
> >
> > Zhenhua
> >
> >> -----Original Message-----
> >> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> >> bounces at yoctoproject.org] On Behalf Of Siva Borra
> >> Sent: Friday, May 22, 2015 4:26 PM
> >> To: meta-freescale at yoctoproject.org
> >> Cc: Adrian Dudau
> >> Subject: [meta-freescale] P3041DS: SATA SCSI disk gives errors
> >>
> >> Hello,
> >>
> >> With latest dizzy branch of meta-fsl-ppc, with revision
> >> (linux-qoriq_3.12.bb and linux-qoriq_3.12-prt.bb, Linux SRCREV =
> >> "6619b8b55796cdf0cec04b66a71288edd3057229")
> >> Instead of recognizing the HDD attached at SATA, it gives the following
> errors.
> >>
> >> [ 2.153541] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [
> >> 6.800430]
> >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 7.822380]
> >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 11.966438]
> >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 13.489386]
> >> ata2.00: failed to IDENTIFY (I/O error,
> >> err_mask=0x1)
> >>
> >> Same feature works fine with 3.0.xx kernel supplied with board.
> >> Please suggest how to fix this issue?
> >>
> >> Regards,
> >> Siva Borra.
> >>
> >> --
> >> _______________________________________________
> >> meta-freescale mailing list
> >> meta-freescale at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-freescale