[meta-freescale] Fido with kernel 3.10.17
Nikolay Dimitrov
picmaster at mail.bg
Wed May 13 11:25:48 PDT 2015
On 05/13/2015 09:15 PM, Gary Thomas wrote:
> On 2015-05-13 11:00, Gary Thomas wrote:
>> On 2015-05-13 10:16, Gary Thomas wrote:
>>> On 2015-05-13 08:00, Gary Thomas wrote:
>>>> On 2015-05-13 07:27, Gary Thomas wrote:
>>>>> On 2015-05-13 07:07, Otavio Salvador wrote:
>>>>>> On Wed, May 13, 2015 at 9:57 AM, Gary Thomas <gary at mlbassoc.com>
>>>>>> wrote:
>>>>>>> On 2015-05-12 06:59, Otavio Salvador wrote:
>>>>>>>>
>>>>>>>> On Tue, May 12, 2015 at 9:53 AM, Gary Thomas <gary at mlbassoc.com>
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> On 2015-05-12 06:48, Otavio Salvador wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, May 12, 2015 at 9:47 AM, Gary Thomas
>>>>>>>>>> <gary at mlbassoc.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 2015-05-12 06:43, Otavio Salvador wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, May 12, 2015 at 9:27 AM, Nikolay Dimitrov
>>>>>>>>>>>> <picmaster at mail.bg>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Gstreamer-1.0 freezes instantly with my test video streams.
>>>>>>>>>>>>> As I've
>>>>>>>>>>>>> invested some time in the past to really force
>>>>>>>>>>>>> gstreamer-0.10 to
>>>>>>>>>>>>> work,
>>>>>>>>>>>>> I'm quite reluctant to go forward with gstreamer-1.0,
>>>>>>>>>>>>> especially when
>>>>>>>>>>>>> its MPEGTS implementation is, well... half-working. So I'm
>>>>>>>>>>>>> sticking
>>>>>>>>>>>>> with
>>>>>>>>>>>>> what I've made to work so far.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Did you try the community plugin? We have been using it with
>>>>>>>>>>>> several
>>>>>>>>>>>> customers and in general it is working very well.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Is that not what you would get when running the media player?
>>>>>>>>>>>
>>>>>>>>>>> Do you have an example pipeline that does work, e.g. play a
>>>>>>>>>>> complete movie (H264+mp3) in .mp4 container?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> gst-play-1.0 works.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Not for me on either of the i.MX6 boards I have here :-( What
>>>>>>>>> board(s)
>>>>>>>>> [and kernel] have you tested with?
>>>>>>>>>
>>>>>>>>> What did you play? What is your display device? Anything else
>>>>>>>>> you can provide that might help me figure this out...
>>>>>>>>
>>>>>>>>
>>>>>>>> Did you use the gstreamer1.0-imx? The fsl-image-multimedia works
>>>>>>>> for
>>>>>>>> many movies.
>>>>>>>>
>>>>>>>
>>>>>>> I found that my kernel was not enabling mxc_v4l2_output. I've
>>>>>>> enabled this
>>>>>>> and now the result is different, but always failing with:
>>>>>>> mxc_v4l2_output v4l2_out.32: Bypass IC.
>>>>>>> Attempt to unlock mutex that was not locked
>>>>>>>
>>>>>>> Do you have an image where this works correctly? I'd like to try
>>>>>>> it with
>>>>>>> my kernel on my hardware, etc.
>>>>>>
>>>>>> http://ci.ossystems.com.br/public/fsl-community-bsp/fido
>>>>>>
>>>>>
>>>>> Thanks. I tried an image for my SabreLite, but it seems to be missing
>>>>> important bits. This is the image I tried:
>>>>>
>>>>> http://ci.ossystems.com.br/public/fsl-community-bsp/fido/16/x11/nitrogen6x/fsl-image-multimedia-nitrogen6x.sdcard
>>>>>
>>>>>
>>>>> It doesn't have gst-play-1.0, nor much of anything as far as I can
>>>>> tell.
>>>>> X brings up a terminal window, but I don't see how to run anything
>>>>> else,
>>>>> e.g. chrome?
>>>>>
>>>>> What am I missing? Perhaps I chose the wrong image? How do I play
>>>>> a movie
>>>>> using this image (as your comment above says should work)?
>>>>>
>>>>> Thanks again
>>>>>
>>>>
>>>> I tried a different image that has more tools:
>>>>
>>>> http://ci.ossystems.com.br/public/fsl-community-bsp/fido/16/x11/nitrogen6x/fsl-image-machine-test-nitrogen6x.sdcard
>>>>
>>>>
>>>> Sadly, it's working the same as the image(s) I build myself:
>>>>
>>>> root at nitrogen6x:~# export DISPLAY=:0.0
>>>> root at nitrogen6x:~# gst-play-1.0 Vlad+Louise.mp4
>>>> mxc_cam_select_input: input(0) CSI IC MEM
>>>> mxc_v4l_open: Mxc Camera no sensor ipu1/csi0
>>>> mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
>>>> Now playing /home/root/Vlad+Louise.mp4
>>>> [INFO]liProduct Info: i.MX6Q/D/S
>>>> [INFO] bitstreamMode 1, chromaInterleave 0, mapType 0,
>>>> tiled2LinearEnable 0
>>>> CODEC: BLN_MAD-MMCODECS_AACD_ARM_03.09.00_CORTEX-A8 build on Jun 19
>>>> 2014 18:30:32.
>>>> Attempt to unlock mutex that was not locked
>>>> Aborted
>>>>
>>>> Please tell me again how this is working well for your customers?
>>>> What am I doing wrong?
>>>>
>>>> Note: I've tried multiple .mp4 files, with the same results.
>>>>
>>>
>>> I've tracked this down to the gst1.0-fsl-plugin package.
>>> Here's a GDB backktrace from the abort:
>>>
>>> (gdb) bt
>>> #0 0xb6b109d4 in __GI_raise (sig=sig at entry=6) at
>>> ../sysdeps/unix/sysv/linux/raise.c:55
>>> #1 0xb6b144d4 in __GI_abort () at abort.c:89
>>> #2 0xb6d537e4 in g_mutex_unlock_slowpath
>>> (mutex=mutex at entry=0xb39ff460, prev=<optimized out>)
>>> at
>>> /usr/src/debug/glib-2.0/1_2.44.0-r0/glib-2.44.0/glib/gthread-posix.c:1326
>>>
>>> #3 0xb6d542f8 in g_mutex_unlock (mutex=mutex at entry=0xb39ff460)
>>> at
>>> /usr/src/debug/glib-2.0/1_2.44.0-r0/glib-2.44.0/glib/gthread-posix.c:1349
>>>
>>> #4 0xb6d5441c in g_cond_wait (cond=0xfffffffe,
>>> cond at entry=0xb49085e4, mutex=0xb39ff460, mutex at entry=0xb49085f0)
>>> at
>>> /usr/src/debug/glib-2.0/1_2.44.0-r0/glib-2.44.0/glib/gthread-posix.c:1394
>>>
>>> #5 0xb31d3a98 in compositor_compositing_thread (compositor=0xb49085d0)
>>> at
>>> /usr/src/debug/gst1.0-fsl-plugin/4.0.3-r0/gst1.0-fsl-plugins-4.0.3/plugins/overlay_sink/compositor.c:282
>>>
>>> #6 0xb6d34be4 in g_thread_proxy (data=0xb4902a30)
>>> at
>>> /usr/src/debug/glib-2.0/1_2.44.0-r0/glib-2.44.0/glib/gthread.c:764
>>> #7 0xb6c27de0 in start_thread (arg=0xb39ff460) at pthread_create.c:338
>>> #8 0xb6bb4fa0 in ?? () at ../sysdeps/unix/sysv/linux/arm/clone.S:89
>>> from /tmp/p0382_root/lib/libc.so.6
>>>
>>> The function in question is:
>>>
>>> static gpointer compositor_compositing_thread (gpointer compositor)
>>> {
>>> CompositorHandle *hcompositor = (CompositorHandle*) compositor;
>>>
>>> while (hcompositor->running) {
>>> COMPOSITOR_WAIT_SURFACE (hcompositor);
>>> compositor_do_compositing_surface_list (hcompositor);
>>> }
>>>
>>> GST_DEBUG ("compositor thread exit");
>>>
>>> return;
>>> }
>>>
>>> It's failing on the 'COMPOSITOR_WAIT_SURFACE' function, the first time
>>> is is called.
>>>
>>> Anyone know why this might be failing? Does someone have a working
>>> example of this code - from either fido or current master?
>>>
>>> Thanks
>>>
>>
>> BTW, this patch fixes the problem and I can play my videos with gst-play.
>> Is it correct?
>>
>> Index: gst1.0-fsl-plugins-4.0.3/plugins/overlay_sink/compositor.c
>> ===================================================================
>> --- gst1.0-fsl-plugins-4.0.3.orig/plugins/overlay_sink/compositor.c
>> +++ gst1.0-fsl-plugins-4.0.3/plugins/overlay_sink/compositor.c
>> @@ -278,6 +278,7 @@ static gpointer compositor_compositing_t
>> {
>> CompositorHandle *hcompositor = (CompositorHandle*) compositor;
>>
>> + g_mutex_lock(&hcompositor->lock);
>> while (hcompositor->running) {
>> COMPOSITOR_WAIT_SURFACE (hcompositor);
>> compositor_do_compositing_surface_list (hcompositor);
>>
>
> "Working" was a bit premature :-( gst-play does work when I run it
> manually from the command line. When I run it from the window manager
> (i.e. click on 'media player'), it tries to run now (as opposed to
> quitting immediately), but there is no video shown, only a progress
> bar.
>
> Anyone know what might be the difference when running in these two
> modes?
You can compare the command line arguments and processes' environments,
to look for any difference. Also, you can compare the gstreamer media
graphs.
Regards.
More information about the meta-freescale
mailing list