[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2015-05-11
Otavio Salvador
otavio at ossystems.com.br
Mon May 11 10:08:17 PDT 2015
Hello,
I pushed following updates:
commit a5df741095ca925dfceda07059e9df99282c13be (HEAD, fslc/master-next, fslc/master, pending)
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 12:03:20 2015 -0300
cubox-i: Install bcm4330-nvram-config to enable WiFi support
The WiFi chip installed in the board is the Broadcom 4330, so we ought
to provide the proper nvram config and firmware to enable the board to
proper support the WiFi.
Change-Id: I4d5ed031edb28a79c033098d23eedc642cccc7e0
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam at freescale.com>
commit be0e5baa60dd16f4438053a66141505ed282b76a
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 12:10:20 2015 -0300
bcm4330-nvram-config: Add cubox-i support
The cubox-i board has a bcm4330 chip. This enables the nvram
configuration to allow the WiFi to work out of box.
Change-Id: I4b7ba516083c9f24c55ede8da49dd9ba7be4a31b
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam at freescale.com>
commit 4b52116f5e204f21d972940f7116a05e88a06473
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 09:58:11 2015 -0300
cubox-i: Remove linux-firmware-ath6k from MACHINE_FIRMWARE
The linux-firmware-ath6k is not necessary for the board to work and
adds no features for standard users, drop it.
Change-Id: I8b4d6eb94564f0e92abb6d9630fc3cf765b8fa8c
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
commit 21cbd0c14ff9fc8fd404e3bba6e85ccea81ecc5f
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 09:57:02 2015 -0300
cubox-i: Remove UBOOT_ENTRYPOINT
The UBOOT_ENTRYPOINT is duplicated from imx-base.inc. Drop it.
Change-Id: Ibd6f65f2b454206391249f7630d6fd1dc214e6f7
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
commit 7f82b848508bef3ef26d4343d5ebd91c8e62614c
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 09:56:07 2015 -0300
u-boot-cubox-i: Remove as it is not unused
Since we moved the board to use u-boot-fslc, this recipe is now
unused.
Change-Id: I67a078f036e881cedaea07ecce50818fed2874f8
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
commit 50d1ecb722dfcda94f92361c518af1011456f339
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Mon May 11 09:54:10 2015 -0300
cubox-i: Use u-boot-fslc
The U-Boot FSLC fork now has support for both HummingBoard and Cubox-i
boards. It supports booting them in all supported variants relying on
SPL to detect the board, CPU and memory.
Change-Id: I19efc6f7dadb8055b9e29b540275d319aefc303f
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam at freescale.com>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list