[meta-freescale] Q & A

[Nikolay Dimitrov]

Hi Diem,

On 05/07/2015 05:54 PM, Phạm Quang Điềm wrote:
> Hi!
>
> I'm try to set bit throught GND, DM, DP of USB 2.0 i.MX233 128 pin in
> OTP mode. But, computer is not recognized? ​, why?
>
> 2015-05-07 8:10 GMT-06:00 Nikolay Dimitrov <picmaster at mail.bg
> <mailto:picmaster at mail.bg>>:
>
> Hi Diem,
>
> On 05/07/2015 04:55 PM, Daiane Angolini wrote:
>
> On Sat, Apr 25, 2015 at 1:11 AM, Phạm Quang Điềm <quangdiem at gmail.com
> <mailto:quangdiem at gmail.com>> wrote:
>
> Hi!
>
> I'm Diem from Viet Nam, I'm searching imx233 of freescale.
>
>
> Hi Diem! How are you?
>
> I'm from Brazil.
>
> I attacted my project with mail. Boot from microsd thought COM RS232,
> display characters "0x8020a007"
>
>
> There are 2 possible issues with this error: - wrong boot
> configuration - please make sure the boot-config switches are set-up
>  for sdcard boot; - you have probably wrong sdcard boot-sector.
> imx233 is extremely picky on the bootlet layout. Please use a proven
> way to generate sdcard images, like Yocto (select one of the imx233
> machines and try one of the simplest images like
> core-image-minimal). Yocto scripts generate working bootable images
> and reduce the hassle of the manual error-prone work.
>
> Btw, here's a reference with imx233 ROM error codes:
>
> http://sasamy.narod.ru/IMX23_ROM_Error_Codes.pdf
>
>
> What error? Resolve?
>
>
> I have no idea what is your error. Maybe you can describe a little
> bit more about your system instead of adding a schematic...
>
> We are a software community, sometimes we can help with few hardware
> issue but it is not often.
>
>
> Daiane
>
> Thank you very much!
>
> Best Regards
>
>
> -- .................................................................
>
>
> Mr. Phạm Quang Điềm Email: quangdiem at gmail.com
> <mailto:quangdiem at gmail.com> Tel: +84979153461 <tel:%2B84979153461>
>
> Work: Telecom System Laboratory
>
> School of Electronics and Telecommunications (SET:
> http://set.hust.edu.vn) Hanoi University of Science and Technology
> (HUST: http://hust.edu.vn)
>
> No.1 - Dai Co Viet - Ha Noi
>
> -- _______________________________________________ meta-freescale
> mailing list meta-freescale at yoctoproject.org
> <mailto:meta-freescale at yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>
> Regards, Nikolay
>
>
>
>
> -- .................................................................
>
>
> Mr. Phạm Quang Điềm Email: quangdiem at gmail.com
> <mailto:quangdiem at gmail.com> Tel: +84979153461
>
> Work: Telecom System Laboratory
>
> School of Electronics and Telecommunications (SET:
> http://set.hust.edu.vn) Hanoi University of Science and Technology
> (HUST: http://hust.edu.vn)
>
> No.1 - Dai Co Viet - Ha Noi

Unfortunately I don't know the answer for this specific Windows issue.
I'm almost sure that double-checking with Freescale's imx233 datasheet
will bring lots of answers to your questions.

Also, please respond to the mailing list, so other engineers can also
benefit of these discussions.

Regards,
Nikolay