[meta-freescale] [meta-fsl-arm-extra][PATCH 0/3] linux-boundary (3.10.17): update to latest up-stream

[Eric Nelson]

Hi Gary,

On 03/26/2015 07:18 AM, Gary Thomas wrote:
> On 2015-03-13 16:17, Eric Nelson wrote:
>> Hi Gary,
>>
>> On 03/13/2015 03:02 PM, Gary Thomas wrote:
>>> On 2015-03-13 15:53, Eric Nelson wrote:
>>>> For dizzy branch.
>>>>
>>>> Update linux-boundary code, defconfig, and machine configurations to
>>>> match Boundary Devices up-stream kernels, including support for new
>>>> peripherals and a new Nitrogen6_VM board.
>>>>
>>>> Eric Nelson (3):
>>>>     linux-boundary (3.10.17): Bump SRCREV to da45c17
>>>>     linux-boundary (3.10.17): sync defconfig for nitrogen6x
>>>>     nitrogen6x: Add two new DTBs for Nitrogen6_VM board
>>>>
>>>>    conf/machine/nitrogen6x.conf                       |  1 +
>>>>    .../linux-boundary-3.10.17/nitrogen6x/defconfig    | 39
>>>> +++++++++++++++++-----
>>>>    recipes-kernel/linux/linux-boundary_3.10.17.bb     |  2 +-
>>>>    3 files changed, 33 insertions(+), 9 deletions(-)
>>>>
>>>
>>> Any hope of getting 3.10.53 anytime soon?  Including video
>>> and camera capture?
>>>
>>
>> Both are present on our -pass1 branch, but we're still testing.
>>     https://github.com/boundarydevices/linux-imx6/tree/boundary-imx_3.10.53_1.1.0_ga-pass1
>>
>>
>> Because of changes in the LVDS driver, we'll also need an update to the
>> boot script as described in this commit:
>>     https://github.com/boundarydevices/u-boot-imx6/commit/740ce44
> 
> I just noticed a new boundary-imx_3.10.53_1.1.0_ga-pass2 branch.
> This tests quite well on my SabreLite (audio, video, capture)
> 
> How close is this to being ready to "publish" to Yocto?
> 

Very close. We'll probably do one more pass before publishing
perhaps early next week.

> Also, when I boot with an HDMI (TV/monitor) plugged in, I still
> get audio via the 3.5mm [headphone] jack.  How can I enable it
> to come out of my TV speakers?
> 

You can either re-configure ALSA to have HDMI (hw1:0) as the
default PCM or use parameters for various apps:
	
	http://boundarydevices.com/audio-output-select

Note that this hasn't (shouldn't have) changed in 3.10.53.

Regards,


Eric