[meta-freescale] [meta-fsl-arm-extra][PATCH v2 3/3] colibri-vf: initial machine for Toradex Vybrid modules

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

The two modules Colibri VF50 and Colibri VF61 are very similar,
with this generic machine called "colibri-vf" both modules are
supported. The bootloader default environment expects the Linux
kernel zImage as well as the device tree files to be located in
the /boot folder of the root file system. Use IMAGE_INSTALL on
the machine level to install them into the root file system by
default.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---
 conf/machine/colibri-vf.conf | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 conf/machine/colibri-vf.conf

diff --git a/conf/machine/colibri-vf.conf b/conf/machine/colibri-vf.conf
new file mode 100644
index 0000000..92d5fd8
--- /dev/null
+++ b/conf/machine/colibri-vf.conf
@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: Toradex Colibri VF50/VF61
+#@SOC: VF500/VF610
+#@DESCRIPTION: Machine configuration for Toradex Colibri VF50/VF61 powered by Freescale Vybrid SoC
+#@MAINTAINER: Stefan Agner <stefan.agner at toradex.com>
+
+include conf/machine/include/imx-base.inc
+include conf/machine/include/tune-cortexa5.inc
+
+SOC_FAMILY = "vf:vf50:vf60"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-toradex"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_DEVICETREE += "vf500-colibri-eval-v3.dtb vf610-colibri-eval-v3.dtb"
+
+# U-Boot expects the kernel and device tree directly in /boot of the rootfs
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-image kernel-devicetree"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-toradex"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-toradex"
+
+# U-Boot NAND binary includes 0x400 padding required for NAND boot
+UBOOT_BINARY = "u-boot-nand.imx"
+UBOOT_MAKE_TARGET = "u-boot-nand.imx"
+UBOOT_MACHINE = "colibri_vf_defconfig"
+
+IMAGE_FSTYPES = "tar.bz2 ubifs ubi"
+
+# Enable free --space-fixup (-F) by default, this allows DFU updates
+MKUBIFS_ARGS = " -c 8112 -e 124KiB -m 2KiB -F"
+UBINIZE_ARGS = " -p 128KiB -m 2048 -s 2048"
+UBI_VOLNAME = "rootfs"
+
+SERIAL_CONSOLE = "115200 ttyLP0"
+
+MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"
-- 
1.9.3