[meta-freescale] dizzy branch kernel 3.10.17, pcie_ref_clk stop output clock to device

[Wally Yeh]

Hi, guys:
    I turn on CONFIG_PCI, PCI_IMX6, and RC_MODE_IN_EP_RC_SYS to use pcie
device.

    but when I use lspci -v, if shows:
00:00.0 PCI bridge: Device 16c3:abcd (rev 01) (prog-if 00 [Normal decode])
        Flags: fast devsel
        Memory at 01000000 (64-bit, prefetchable) [disabled] [size=1M]
        Bus: primary=00, secondary=00, subordinate=00, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge: 00000000-000fffff
        [virtual] Expansion ROM at 01300000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Capabilities: [70] Express Root Port (Slot-), MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit Ethernet controller (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: r8168

I also notice that pcie_ref_clk stop output since linux kernel
start.(measure from oscilloscop)
so I wonder is there some extra configs need to turn on.


Wally
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150306/09956103/attachment.html>