[meta-freescale] Yocto 1.8 menuconfig does not show up

[Seifert, Thomas (T.)]

Hello Wandboard Community,

My setup:
HW: Wandboard Quad + HDMI Touchscreen

SW: Yocto 1.8 https://github.com/Freescale/fsl-community-bsp-platform -b master -> build on VirtualBox Ububuntu 15.04



I can build a core-image-x11 on Ubuntu and run it on my hardware. That is good!



Now I want to activate USB touchscreen support in the kernel. BUT: bitbake linux-wandboard -c menuconfig leads to nothing :  no menuconfig menu does show up.

I can start menuconfig direct in ~/fsl-community-bsp/build/tmp/work/wandboard_quad-poky-linux-gnueabi/linux-wandboard/3.10.53-r0/git with "make menuconfig" but it has all default values in.

Has somebody experienced the same? And can help me?

Mit freundlichen Grüßen / with best regards
----------------------------------------------------------
Thomas Seifert
Lead Software Engineer
Visteon Inovation and Technology GmbH
Visteonstrasse 4-10
50170 Kerpen
Germany

[http://motoroids.com/wp-content/uploads/2013/08/VISTEON-logo.jpg]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150616/cbfb8e24/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2678 bytes
Desc: image001.jpg
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150616/cbfb8e24/attachment.jpg>