[meta-freescale] CPU failed to boot : Error with 3.14.28 kernel

[shar harisan]

Hello all,
         I am facing issue with linux-imx 3.14.28 kernel. I have a imx6solo
board.
When I flash the kernel generated from Yocto, it gives the following error

-----------------------------------------------------------------------------------------------------------------------------------------
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
    lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x806d54ac   (6966 kB)
      .init : 0x806d6000 - 0x80a6a100   (3665 kB)
      .data : 0x80a6c000 - 0x80aaa1e0   ( 249 kB)
       .bss : 0x80aaa1ec - 0x80b0cc20   ( 395 kB)
*SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1*
Preemptible hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 512 kB
failed to set parent of clk gpu2d_core_sel to pll2_pfd1_594m: -22
Switching to timer-based delay loop
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every
1431655765682ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 1581.05 BogoMIPS
(lpj=7905280)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x10516040 - 0x10516098
*CPU1: failed to boot: -38*
Brought up 1 CPUs
SMP: Total of 1 processors activated.
------------------------------------------------------------------------------------------------------------------------------------------

my board is solo, then why the kernel debug messages show CPUs =2?
Also it gives error as CPU1:failed to boot. Do i need to change any
configurations in yocto to make CPUS=1?


-Thanks
Sharvari
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150724/0ae06249/attachment.html>