[meta-freescale] [meta-fsl-ppc][PATCH 08/16] t1042d4rdb[-64b]: add machine files

[Otavio Salvador]

On Fri, Jul 17, 2015 at 4:17 AM,  <b28495 at freescale.com> wrote:
> From: Ting Liu <ting.liu at freescale.com>
>
> The T1042D4 Reference Design Board (RDB) system is a hardware board
> featuring the Freescale QorIQ T1042 processor with two Power e5500 cores.
>
> T1042D4RDB board Overview
> -------------------------------------
> - SERDES Connections, 8 lanes supporting:
>         - PCI
>         - SGMII
>         - SATA 2.0
>         - QSGMII(only for T1040D4RDB)
>     - DDR Controller
>         - Supports rates of up to 1600 MHz data-rate
>         - Supports one DDR4 UDIMM
>     -IFC/Local Bus
>         - NAND flash: 1GB 8-bit NAND flash
>         - NOR: 128MB 16-bit NOR Flash
>     - Ethernet
>         - Two on-board RGMII 10/100/1G ethernet ports.
>         - PHY #0 remains powered up during deep-sleep
>     - CPLD
>     - Clocks
>         - System and DDR clock (SYSCLK, ¡°DDRCLK¡±)
>         - SERDES clocks
>     - Power Supplies
>     - USB
>         - Supports two USB 2.0 ports with integrated PHYs
>         - Two type A ports with 5V at 1.5A per port.
>     - SDHC
>         - SDHC/SDXC connector
>     - SPI
>         - On-board 64MB SPI flash
>     - I2C
>         - Devices connected: EEPROM, thermal monitor, VID controller
>     - Other IO
>         - Two Serial ports
>         - ProfiBus port
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>


Acked-by: Otavio Salvador <otavio at ossystems.com.br>


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750