[meta-freescale] Updates to meta-fsl-arm (master) in 2015-07-13
Liu Ting
ting.liu at freescale.com
Wed Jul 15 21:55:02 PDT 2015
Hello Otavio,
Please help cherry-pick these patches to fido branch too. They can be applied cleanly.
Thanks.
-Ting
> -----Original Message-----
> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> bounces at yoctoproject.org] On Behalf Of Otavio Salvador
> Sent: Tuesday, July 14, 2015 1:03 AM
> To: meta-freescale at yoctoproject.org
> Subject: [meta-freescale] Updates to meta-fsl-arm (master) in 2015-07-13
>
> Hello,
>
> I pushed following updates:
>
> commit c54e9718a059013d4f9f8e9d150a0685b8400a3a (HEAD -> pending,
> yocto/master-next, yocto/master)
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:20 2015 +0800
>
> layer.conf: include layer-specific bb files
>
> Previously layer-specific bbappends are applied when that layer
> is included in the configuration.
>
> There is layer-specific bb files too (like asf_git.bb). Apply the
> same rule here.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit f90a4147d6d9c0666fe7772827efd4b3d9a9a31c
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:19 2015 +0800
>
> rename ls-base.inc -> qoriq-arm.inc
>
> Preparation for next merge stage with qoriq-ppc.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit b67e1a2d0e0cbb6f5efdb260fe7d052222819213
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:18 2015 +0800
>
> asf: use KBUILD_OUTPUT to point to build-artifacts
>
> In poky commit 46cdaf1, the kernel build output was put into
> kernel-build-artifacts, and kernel-source is kept "pristine".
>
> KERNEL_PATH points to kernel-source, while KBUILD_OUTPUT points
> to build-artifacts which can be used for external module build.
>
> asf Makefile tries to include the .config, use KBUILD_OUTPUT to
> avoid build error.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit 42039a0d48dd382aeebd73e7b21f4739226f59fa
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:17 2015 +0800
>
> asf: update to revision 62ba10a
>
> This imports following changes:
>
> 62ba10a asf_fmc: Patch to update the name of xml files.
> 8d744dd asf: Patch to fix ipv6 issue on dpaa.
> ddf9678 asf: Patch to return jumbo packet back.
> dcda291 asf: Patch to include caam_jr_strstatus in ASF_IPSEC_DEBUG mode.
> 49f591f asf: Patch to change function signature caam_jr_strstatus
> f860eff ipsecproc: Patch to fix display of ipsec stats.
> 461586d ASFIPSEC: fix compilation for SEC 3.x when ASF_IPSEC_DEBUG is
> defined
> 03b9bad asf: Patch to fix sha256 issue.
> a21b2d7 Removing Ethernet padding in abuf to skb conversion
> a03283d4 Aligning function ASFFFPProcessAndSendFD and
> ASFFFPProcessAndSendPkt while validating flows
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit 1d7d927dc2f70662b9b8a73c731f7918e229f161
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:16 2015 +0800
>
> rcw: update to revision 426f7a6
>
> This imports following changes:
>
> 426f7a6 SECURE BOOT: Add missing RCW's for T4240QDS
> 756454f SECURE BOOT: Rename the RCW's
> 7782087 SECURE BOOT: Remove Unwanted RCW's
> e93c210 LS1021: Unset BOOT_HO bit in rcw.
> 4375fc4 t1023rdb: update IFC_MODE to 0x2F for errata A-009138
> 5cf9bc5 T4240QDS: Add four 1800MHz/Core RCW files for T4240QDS board
> cff536a t1023rdb: set RTC=1 to enable GPIO1[14]
> a5983f2 T4240RDB: Add one new RCW for T4240RDB board
> 3a6ae48 ls1021a: fix some serdes settings for SATA
> 31078e1 ls1021atwr: do not power down PLL which is used by SATA
> c6d72e3 t2080qds: rcw: Add eMMC DDR mode RCW
> c77415c T104xD4RDB: update SRDS_PLL_REF_CLK_SEL_S1 value
> e2c0844 ls1021atwr: add USB 2.0 support
> fd0c1df p5020/p5040: NAND Secure Boot RCW added with PBI commands
> 259d57d t1023rdb: add rcw for t1023rdb board
> c3ab906 T1042: Add t1042d4rdb rcw files for serdes protocol 0x86
> ae39560 T1040: Add t1040d4rdb rcw files for serdes protocol 0x66
> b9d3c22 p3041: NAND Secure Boot RCW added with PBI commands
> dc0fad9 t2080rdb: update ddr to 1866MT/s
> 03c5ee6 t2080: update platform clock to 600MHz
> 72945fa rcw: ls102xa: merge rcw for lpuart and dcu
> 6678741 rcw: ls102xa: Adjust the features supported in SD boot
> f7a54c1 arm: ls102xa: Increase IO drive strength for LS1021AQDS board
> 3dd07fa B4860-As-B3: Add two new RCW files
> 69a041c B4860QDS: Add HWA_CGA_M3_CLK_SEL bits define in b4860.rcwi file
> 87289d5 ls102xa: rcw: Add QSPI boot RCW for LS1021A TWR board
> 13bf692 t1024: update FM1_MAC_RAT from 0 to 1
> 5b94b3e t1024rdb: add new rcw 0x135 and minor update
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit d5a3409d2c56872d8600ffb84104d9346fa2d31d
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:15 2015 +0800
>
> cst: update to revision 6f57c86
>
> This imports following changes:
>
> 6f57c86 Modify input files comments.
> 327932d FIX SFP Write Protect Issue
> dbc2080 Add support for SFP1.x and SFP2.x in gen_drv utility.
> 5aa79ec Modify images names in ls1 input files.
> b5d442b P3/P5: Input Files for NAND Secure Boot
> 51dc4a4 Makefile: Build uni_pbi tool
> a647f39 CST : Change Alignment offset
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit f20a2ed36ad4ac5a925898bd4b5a365303c59568
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:14 2015 +0800
>
> linux-ls1: package zImage into kernel-image
>
> When running kvm test on ls1, the guest kernel needs to be zImage format.
> This is a known limitation with qumu-fsl v2.2.0 release.
>
> package zImage into kernel-image which can then be installed into rootfs.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit 68cd0207d8dc55557066944f2ead3fcc053cc1cc
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:13 2015 +0800
>
> qemu-fsl: upgrade from v1.7 to v2.2.0
>
> Update the supported QEMU version from v1.7 to v2.2.0 and include the
> Freescale patches on top of this.
>
> Baseline: http://git.qemu.org/?p=qemu.git;a=tag;h=refs/tags/v2.2.0
> Freescale patches:
> 00ac004 QEMU: PPC: Support for VFIO_IOMMU_DUMMY.
> 58d1cc4 QEMU: PPC: Identity mapped memory support for qemu.
> 07d4f5f Qemu: PPC: e500: Move CCSR and MMIO space to upper end of address
> space
> a7aee41 QEMU: PPC: e500: Move CCSR definition to params
> fbcc0ca vfio-pci: add direct pci device assignment for fsl powerpc
> 536df03 Update Linux Headers from 3.18
> ee367e4 QEMU:Add support for e5500 core revision v102.1 present on T1024
> SOC.
> b0c2f44 hw/arm/virt: Use memory_region_allocate_system_memory to allocate
> memory
> b2f233e PPC: add e6500 cpu class
> 694c39a QEMU: PPC: set default cpu type to be 'host'
> 1572872 QEMU: PPC: specify PVRs for all e500 cores
>
> Also fix indent.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit 5bf882db7b883be987b65c1bcc68e6e89b4e1187
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:12 2015 +0800
>
> ls1021atwr: update lquart/secure-boot UBOOT_CONFIG
>
> 1. config name for lpuart was renamed to ls1021atwr_nor_lpuart_config.
> 2. add ls1021atwr_nor_SECURE_BOOT_config for secure boot.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit b91d3608d2f96df1ce8a6ab7186e00dd946ba5f7
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:11 2015 +0800
>
> ls1021aqds: remove as it is not supported
>
> The board is not supported in SDK 1.8 and as it is untested QorIQ team
> does
> not offer support for it. Drop the board to avoid user using untested BSP
> components in this board.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit a1ebad6c9946e9bbcb69bcca752f3fc80c4f4149
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:10 2015 +0800
>
> u-boot-ls1: update to revision v2015.01-630-g6ba8eed
>
> Changes:
> 1. Rebased on git://git.denx.de/u-boot.git v2015.01-487-gab92da9
> 2. Applied another 143 FSL/backported patches (git log ab92da9..)
> 3. add DEPENDS on dtc-native as u-boot brings in device tree files
> 4. use u-boot-with-spl-pbl.bin for nand
> 5. replace with u-boot-dtb.bin when swapping the image endianness
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit bcbbc0c73772674c1d060d994dc40abc79811832
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:09 2015 +0800
>
> u-boot-ls1: merge u-boot-ls1.inc into recipe
>
> There is no benefit to having a separate .inc file when we only support
> one
> version of u-boot-ls1.
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> commit db4f4b00d6f060ce47e2982cc0afd9d85d6180f1
> Author: Ting Liu <ting.liu at freescale.com>
> Date: Fri Jul 10 17:45:08 2015 +0800
>
> linux-ls1: update to revision f488de6
>
> Minor version update to 3.12.37-rt51 with new features:
> * e6500 hugepage TLB miss performance improvement
> * T1023RDB support
> * T1040D4RDB and T1042D4RDB support
> * DIU [T1042]
> * DPAA Ethernet: loadable module
> * eMMC: DDR mode [T2080]
> * eTSEC: Gianfar upstream updates and fixes
> * fmlib: table statistics, stats extension
> * IEEE802.1AE (MACSEC) and IEEE802.1X (port-based network access control)
> [T104x, T102x]
> * IEEE1588 ptpd open source stack includes more DPAA processors: P1023,
> P2041, P3041, P5020, P5040, T4240, T1023
> * LAG SGMII 2.5G ports support - IPv4 traffics forwarding on aggregated 2
> x 2.5Gb L2 Switch FMAN ports [1040]
> * LAG support of IPv6 traffics forwarding and TCP/UDP traffics over IPv6
> forwarding (2 x 2.5Gb L2 Switch WAN) [1040]
> * LAG support of IPv6 traffics forwarding and TCP/UDP traffics over IPv6
> forwarding on both 1 G RGMII port and 1G SGMII port [1040]
> * Power Management: Power off feature for all QDS boards except B9132QDS
> and B4860QDS
> * SEC: QI Driver IPSec performance improvement
> * SGMII 2.5G fixed link [T1024]
> * USB: Dual UTMI
>
> For detailed history, see
> http://git.freescale.com/git/cgit.cgi/ppc/sdk/linux.git/tag/?id=fsl-sdk-
> v1.8
>
> Signed-off-by: Ting Liu <ting.liu at freescale.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>
> Regards,
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
More information about the meta-freescale
mailing list