[meta-freescale] [PATCH][meta-fsl-arm-extra] imx6sl-warp: Change IMAGE_BOOTLOADER

[Daiane Angolini]

Set the default value for IMAGE_BOOTLOADER explicitly instead of override it to
be clean.

WaRP use eMMC boot partition by default and the u-boot inside .sdcard image
does not override it. However, building u-boot binary anyway in order to provide
a binary to be used if an update is needed see how-to override eMMC boot
partition on the following link
 http://git.denx.de/?p=u-boot.git;a=blob;f=board/warp/README

It is only changed back to default value to ease u-boot manual update for the
user.

Signed-off-by: Daiane Angolini <daiane.angolini at freescale.com>
---
 conf/machine/imx6sl-warp.conf | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/conf/machine/imx6sl-warp.conf b/conf/machine/imx6sl-warp.conf
index 536e3d0..da782e6 100644
--- a/conf/machine/imx6sl-warp.conf
+++ b/conf/machine/imx6sl-warp.conf
@@ -27,8 +27,12 @@ include conf/machine/include/tune-cortexa9.inc
 
 SOC_FAMILY = "mx6:mx6sl"
 
-# Use eMMC boot partition by default
-IMAGE_BOOTLOADER ?= ""
+# WaRP use eMMC boot partition by default and the u-boot inside .sdcard image
+# does not override it. However, building u-boot binary anyway in order to provide
+# a binary to be used if an update is needed
+# see how-to override eMMC boot partition on the following link
+# http://git.denx.de/?p=u-boot.git;a=blob;f=board/warp/README
+IMAGE_BOOTLOADER ?= "u-boot"
 
 UBOOT_MACHINE ?= "warp_defconfig"
 
-- 
1.9.1