[meta-freescale] [meta-fsl-arm][PATCH v6 2/7] qe-ucode: add recipes for Layerscape1 support

[b40290 at freescale.com]

From: Chunrong Guo <B40290 at freescale.com>

   *qe-ucode are the microcode binaries for the QUICC Engine hardware block in QorIQ
  products.

Signed-off-by: Chunrong Guo <B40290 at freescale.com>
---
 recipes-bsp/qe-ucode/qe-ucode_git.bb | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 recipes-bsp/qe-ucode/qe-ucode_git.bb

diff --git a/recipes-bsp/qe-ucode/qe-ucode_git.bb b/recipes-bsp/qe-ucode/qe-ucode_git.bb
new file mode 100644
index 0000000..28af4b6
--- /dev/null
+++ b/recipes-bsp/qe-ucode/qe-ucode_git.bb
@@ -0,0 +1,36 @@
+DESCRIPTION = "qe microcode binary"
+SECTION = "qe-ucode"
+LICENSE = "Freescale-EULA"
+LIC_FILES_CHKSUM = "file://EULA;md5=60037ccba533a5995e8d1a838d85799c"
+
+inherit deploy
+
+SRC_URI = "git://git.freescale.com/ppc/sdk/qe-ucode.git;nobranch=1"
+SRCREV= "49efc94b553de5c2a9bd28093592eff0068e161c"
+
+S = "${WORKDIR}/git"
+
+python () {
+	if not d.getVar("QE_UCODE", True):
+		PN = d.getVar("PN", True)
+		FILE = os.path.basename(d.getVar("FILE", True))
+		bb.debug(1, "To build %s, see %s for instructions on \
+			     setting up your qe-ucode" % (PN, FILE))
+		raise bb.parse.SkipPackage("because QE_UCODE is not set")
+}
+
+do_install () {
+       install -d ${D}/boot
+       install -m 644 ${QE_UCODE} ${D}/boot
+}
+
+do_deploy () {
+       install -d ${DEPLOYDIR}/boot
+       install -m 644 ${QE_UCODE} ${DEPLOYDIR}/boot
+}
+addtask deploy before do_build after do_install
+
+PACKAGES += "${PN}-image"
+FILES_${PN}-image += "/boot/*"
+ALLOW_EMPTY_${PN} = "1"
+COMPATIBLE_MACHINE = "(ls102xa)"
-- 
1.9.2