[meta-freescale] sd card image with dizzy (for udoo quad)

[idealsim]

Ok thank you for your answer. If i understand what you say, i need to use  
dora branch for yocto in udoo ? For the sd card, i use the same for the  
two branch with core-minimal (4GB).



Le Tue, 24 Feb 2015 17:49:34 +0100, Otavio Salvador  
<otavio at ossystems.com.br> a écrit:

> On Tue, Feb 24, 2015 at 9:36 AM, idealsim <idealsim at laposte.net> wrote:
>> Hi all, i'm trying to use yocto on my udoo quad board :
>> http://www.udoo.org/. I followed this two tutorial :
>>         - wandboard :
>> http://wiki.wandboard.org/Getting_started_with_Yocto_on_Wandboard
>>         - meta for udoo :
>> http://www.udoo.org/forum/udoo-support-yocto-dora-t826.html
>> (https://github.com/rongals/meta-ronga-udoo)
>>
>>         I have make a first release with core-minimal-image to test it  
>> with
>> dora branch in december. It work fine. After that i tried to do the same
>> with bitbake fsl-core-gui but i had some error (see the post on udoo  
>> forum).
>> This week end i decided to retry yocto with the last stable branch  
>> (dizzy).
>> I make a core-minimal-image and core-image-sato. Bitbake works fine but  
>> when
>> i create the sd card with  sudo dd
>> if=tmp/deploy/images/<MACHINE>/core-image-minimal-<MACHINE>.sdcard
>> of=/dev/sd<N> bs=1M my card don't boot on udoo (the first image with  
>> dora
>> branch work with the same procedure !)
>>         On wandboard forum i found this post
>> http://forums.wandboard.org/viewtopic.php?f=10&t=843&p=3437#p3437 ,
>> apparently they have a problem with dizzy branch to create an sdcard  
>> image,
>> do you confirm that ? how i can resolve this ?
>
> The layer you included the link is supported only on Dora (as it uses
> 3.0.35 kernel) and will not work fine in Dizzy. In either case, the SD
> card error seems related to the size of the image, not the branch. The
> SD card you are using should be small...
>


-- 
Utilisant le logiciel de courrier d'Opera : http://www.opera.com/mail/