[meta-freescale] Kernel freezes during boot, built from Dora for iMX.6 Quad

[Isaac Nickaein]

Hi,

I am trying to build Kernel 3.0.35 for my iMX.6Q. I am using Ka-Ro
TX6Q (http://www.karo-electronics.com/tx6q.html) development kit which
is compatible with the SabreSD boards.

I've downloaded the Dora branch, set it up for imx6qsabresd board and
bitbaked core-image-minimal based on this tutorial:

https://community.freescale.com/servlet/JiveServlet/previewBody/95096-102-10-7847/yocto_tutorial.pdf

After flashing the uImage onto the NAND, the kernel freezes at
"Disabling LCD". Here is the output on the serial console:


U-Boot 2013.07-00115-g828ccd0 (Aug 21 2013 - 11:45:45)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Temperature:   48 C, calibration data 0x59c51469
Board: Ka-Ro TX6Q-1xx0
I2C:   ready
DRAM:  1 GiB
VDDSOC  set to 1420mV
VDDCORE set to 1420mV
NAND:  128 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Invalid color depth: '1120' in video_mode; using default: '24'
IPU HW Rev: 4
CPU clock set to 792.000 MHz
Baseboard: stk5-v3
MAC addr from fuse: 00:0c:c6:79:aa:6f
Net:   FEC
Hit any key to stop autoboot:  0

Loading from nand0, offset 0x180000
   Image Name:   Linux-3.0.35-4.1.0+yocto+gbdde70
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4042436 Bytes = 3.9 MiB
   Load Address: 10008000
   Entry Point:  10008000
## Booting kernel from Legacy Image at 18000000 ...
   Image Name:   Linux-3.0.35-4.1.0+yocto+gbdde70
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4042436 Bytes = 3.9 MiB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Disabling LCD