[meta-freescale] Trouble with i.mx28evk

[Mark Lane]

I have a cable now and I have both ports working as hosts with the 3.18
kernel. The microusb port was set to device mode even though I was unable
to use it.

thanks

On Wed, Feb 11, 2015 at 9:03 AM, Mark Lane <mark at 2100computerlane.net>
wrote:

>
> On Wed, Feb 11, 2015 at 8:57 AM, Fabio Estevam <festevam at gmail.com> wrote:
>
>> On Wed, Feb 11, 2015 at 11:54 AM, Mark Lane <mark at 2100computerlane.net>
>> wrote:
>>
>> > Yes but I am not sure what you mean by that.  Do you want me to see if
>> the
>> > port is getting power?
>>
>> Yes, that's what I meant.
>>
>> >> I have only tested the small connector as USB device.
>> >>
>> >> I don't have a proper cable handy to test it with USB host, but I will
>> >> try it tomorrow.
>> >
>> >
>> > I don't have the proper cabling either at the moment so I will have get
>> > that?
>>
>> I thought you mentioned that you managed to get USB host to work in
>> the small USB connector with 2.6.35.
>>
>> Have did you test it exactly then?
>>
>
> No it's recognizing both devices only and I can see devices hooked up to
> USB1. The only thing I have been able to test is that it's not in device
> mode as it doesn't show up on my laptop as a device when I hook it up to
> that.
>
> --
> Mark Lane
> Linux Systems Integrator
> http://www.2100computerlane.net
> 1-844-723-8112 * 1-289-448-5113
>



-- 
Mark Lane
Linux Systems Integrator
http://www.2100computerlane.net
1-844-723-8112 * 1-289-448-5113
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150211/7210584d/attachment.html>