[meta-freescale] Trouble with i.mx28evk
mark at 2100computerlane.net
Wed Feb 11 05:01:11 PST 2015
Okay this is really weird. If I plug a micro usb cable into the evk and the
other end into my laptop now I can see the usb device in port 2.
On Wed, Feb 11, 2015 at 7:52 AM, Mark Lane <mark at 2100computerlane.net>
> Okay so I tried another sdcard and it booted. I thought I had already
> tried 2 different sdcards but maybe I just kept using the same one.
> Now that I have it booting. I am still having issues with this kernel and
> usb. It's only detecting one of the usb ports.
> root at imx28evk:~# lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Also when I putting a usb device. It is not being recognized.
> On Wed, Feb 11, 2015 at 7:37 AM, Mark Lane <mark at 2100computerlane.net>
>> I have attached the output from minicom for the boot. It's complaining
>> that the 'card never left busy state'. I just recopied the image to the
>> flash drive so maybe I didn't properly unmount it because that is new.
>> Before it would just get to 'waiting for root device' and just sit there.
>> On Wed, Feb 11, 2015 at 7:06 AM, Fabio Estevam <festevam at gmail.com>
>>> Hi Mark,
>>> On Wed, Feb 11, 2015 at 9:41 AM, Mark Lane <mark at 2100computerlane.net>
>>> > I cannot seem to get a usable build using Yocto with either fslc-linux
>>> > imx-linux. I can build a bootable kernel with imx-linux but USB is not
>>> > working. With fslc-linux (3.18), u-boot can load the kernel but the
>>> > can't mount the ext3 file system.
>>> Could you share the whole log from U-boot until the point where the
>>> kernel does not find the rootfs when using the 3.18 kernel?
>>> Fabio Estevam
>> Mark Lane
>> Linux Systems Integrator
>> 1-844-723-8112 * 1-289-448-5113
> Mark Lane
> Linux Systems Integrator
> 1-844-723-8112 * 1-289-448-5113
Linux Systems Integrator
1-844-723-8112 * 1-289-448-5113
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the meta-freescale