[meta-freescale] [meta-fsl-arm-extra][PATCH][master] linux-wandboard: Update kernel to 3.10.53-1.1.0_ga

[John Weber]

On Tuesday, February 10, 2015, Alfonso Tamés <alfonso at tames.com> wrote:

>
>
>> Looks good to me, Alfonso.  I've applied it and tested it with wandcam
>> and gstreamer-1.0.  Looks like I'm getting some sketchy problem that
>> results in a segfault when a gstreamer pipeline shuts down, but not sure if
>> that is due to this kernel or if it existed in previous kernels (3.10.17
>> versions or 3.10.31).
>>
>>
> :(
>
> I just tested a fresh install and I'm getting the same error:
>
> root at wandboard-quad:~# GST_DEBUG=*:3; gst-launch-1.0 -e imxv4l2src
> capture-mode=4 fps-n=30 ! imxvpuenc_h264 bitrate=4096 ! h264parse ! mp4mux
> ! filesink location=video.mp4
> ...
> EOS received - stopping pipeline...
> Execution ended after 0:00:04.088140334
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Caught SIGSEGV
> #0  0x76c72498 in waitpid () from /lib/libpthread.so.0
> #1  0x76c9cb64 in g_on_error_stack_trace () from /usr/lib/libglib-2.0.so.0
> #2  0x0000b4e0 in ?? ()
> Spinning.  Please run 'gdb gst-launch-1.0 1011' to continue debugging,
> Ctrl-C to quit, or Ctrl-\ to dump core.
> ^C
>
> Any ideas Otavio?
>

Can you see this with a videotestsrc?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150211/ff15113e/attachment.html>